ONWA KP-25

Contents

ONWA KP-25 5-inch Marine GPS Chart Plotter User Manual

Model: KP-25

For KP-25, KP-25A, KP-25F, KP-25X, KP-27, KP-27A, KP-27F and KP-27X Multi-Function GPS Chart Plotter

1. Foreword

ONWA Chartplotters are designed to be all-sealed and waterproof, offering rapid position-fixing and resistance to harsh marine environments. The advanced processors ensure fast display, and the design prioritizes professional, reasonable, and user-friendly operation. The built-in large-capacity map storage space provides intuitive and accurate navigation. This device is suitable for navigation and position-fixing of various vessels at sea and rivers, as well as for hydrographic information collection and river management.

2. Key Features

  • Easy to operate
  • Ultra high brightness LCD, viewable under strong sunlight
  • Compatible with multi-mapping systems: C-MAP, Navionics+, KChart2.0 and KChart3.0
  • High resolution LCD (800x480 for 5-inch models)
  • Built-in Class B+ AIS module (for KP-25A, KP-25X, KP-27A and KP-27X only)
  • Selectable NMEA0183 output baudrate and sentences
  • Free to use ONWA detail worldwide coverage KChart system
  • IPX6 waterproof rating
  • Support NMEA2000 (N2K)
  • Compatible with optional external ONWA fishfinder module

3. Safety Instructions

3.1. For the Operator

  • Do not open the equipment: Only qualified personnel should work inside the equipment.
  • Do not disassemble or modify the equipment: Fire, electrical shock, or serious injury can result.
  • Immediately turn off the power: If the equipment is emitting smoke or fire, turn off power at the switchboard. Continued use can cause fire or electrical shock. Contact an ONWA agent for service.
  • Use the proper fuse: Use of a wrong fuse can damage the equipment or cause fire.
  • Ensure power supply compatibility: Be sure the power supply is compatible with the equipment's voltage rating. Incorrect power supply may cause overheating.
  • Temperature range: The usable temperature range is -5°C to 55°C for the display unit. Using the equipment outside these ranges may damage it.

3.2. For the Installer

  • Do not open the cover: Unless totally familiar with electrical circuits and service manual. Improper handling can result in electrical shock.
  • Turn off the power: At the switchboard before beginning the installation. Fire or electrical shock can result if the power is left on.
  • Ensure power supply compatibility: Be sure that the power supply is compatible with the voltage rating of the equipment. Connection of an incorrect power supply can cause fire or equipment damage.
  • Use the proper fuse: Use of a wrong fuse can damage the equipment or cause fire.

4. Setup and Installation

4.1. Verifying Contents

Before installation, please confirm the following items are included in the box:

  • Display unit (including installation bracket and ear clamp)
  • GPS patch antenna
  • Panel Cutout Pattern
  • Quick start and installation manual
  • Face mask and Panel Installation Sticker
  • Standard accessories pack (one 8-core Power/Data Cable, 2 spare fuses, 4 bracket mounting screws, 8 panel mounting screws)
ONWA KP-25 GPS Chart Plotter and included accessories
Figure 4.1: ONWA KP-25 GPS Chart Plotter and included accessories, including the main unit, power/data cable, GPS antenna, mounting hardware, and manual.

4.2. Interconnection Diagram

The KP-25 series supports various connections for enhanced functionality. Ensure all connections are made according to the diagram and voltage specifications.

Interconnection diagram for ONWA KP-25 series showing connections for AIS antenna, external GPS antenna, N2K network, fishfinder transducer, radar, VDR, ECDIS, autopilot, and power input (10.5 to 35 VDC).
Figure 4.2: Interconnection diagram for ONWA KP-25 series. This diagram illustrates how to connect optional accessories like an AIS antenna, external GPS antenna, N2K network, and fishfinder transducer. It also shows the power input range of 10.5 to 35 VDC.

4.2.1. Power/Data Connections

The unit requires a power input of 10.5 to 35 VDC. The 8-core Power/Data Cable includes connections for NMEA 0183 IN+/-, AIS OUT+/-, NMEA 0183 OUT+/-, and Power+/-.

Rear view of the ONWA KP-25 unit showing various ports: PWR/DATA, AIS, GPS, NMEA2000, XDUCER, and current drain information.
Figure 4.3: Rear view of the ONWA KP-25 unit. This image highlights the connection ports for PWR/DATA, AIS, GPS, NMEA2000, and XDUCER, along with the model and input voltage details.

4.2.2. NMEA2000 Connector

The NMEA2000 connector has pins for 2+V, 3-V, 4 SIG H, 5 SIG L, and 1 SHIELD.

4.2.3. XDUCER (Transducer) Connections

For fishfinder models (KP-25F, KP-25X, KP-27F, KP-27X), the XDUCER port connects to the transducer with pins for Sonar+, Temperature ground, No Connection, Temperature, Sonar-, and Sonar ground.

4.3. Installing the Unit

There are three primary methods for installing the fixed equipment: desktop stand mounting, suspension mounting, and embedded panel mounting.

4.3.1. Desktop Stand Mounting

The unit should be mounted on a flat, solid surface for maximum stability. Secure the mounting bracket with screws. Failure to do so may cause the display unit to fall during pitching and rolling, leading to fire or injury.

4.3.2. Suspension Mounting

  1. Secure the bracket to the chosen installation position using the provided four screws.
  2. Attach the chartplotter to the bracket using the provided two knobs.

Notice: Ensure the hanging position can bear the unit's weight and is installed securely. Fasten the unit to the bracket thoroughly to prevent accidental dropping or injury.

4.3.3. Embedded Panel Mounting

  1. Open a hole on the panel according to the provided flush mount template and Panel Installation Sticker.
  2. Remove the 2 strips on the facial panel of KP-25 (or KP-27).
  3. Place the KP-25 (or KP-27) into the prepared hole.
  4. Fix the unit by the 4 supplied screws.
  5. Place back the 2 strips that were removed.

5. Operation Overview

5.1. Keypad Instruction

The keypad provides intuitive control over the device's functions. Here's a summary of key functions:

  • Arrow Keys (Up/Down/Left/Right):
    • Plotter: Move cursor, change settings.
    • Sounder: Move VRM, activate SHIFT range (long press), activate echoes history marker (short press).
  • MENU Key:
    • Press once: Current page menu.
    • Press twice: Main menu.
  • MODE Key: Display 9 screen modes. Press and hold to change track color (Plotter) or activate sonar mode (Sounder).
  • X Key: Withdraw from operation, activate graphic mode selection. Clear cursor position data.
  • Checkmark Key: Confirms input or data. Long press for Drawing Mark option (Plotter), short press for waypoint attribute edit window (Plotter).
  • Zoom In/Out Keys:
    • Plotter/AIS: Enlarge/reduce map/chart scale.
    • Sounder: Decrease/increase depth range.
  • Power Key (⏻): Long press to turn power ON/OFF. Short press to adjust screen brightness and keypad backlight.
  • Function Key (fx): Display other functions (GOTO, tide table, search, etc.) menu. Sounder: Provides signal level selection.
  • MOB Key: Long press to activate Man Overboard function. Short press for AIS detail list.

5.2. Turning ON and OFF Power

To turn on, press the Power key (⏻). The unit will beep and display the "ONWA" logo. Wait for the warning page to appear, then press the Checkmark key to enter working mode. To turn off, press and hold the Power key until the screen goes off.

5.3. Brightness Adjustment and Day/Night Display Mode Settings

Short press the Power key (⏻) to open the brightness adjustment window. Use the Up/Down arrow keys to adjust LCD display brightness and Left/Right arrow keys for keypad backlight. Press the X key to confirm and exit. While the brightness window is open, press the Function key (fx) to switch between day and night display modes.

5.4. How to Select Display Mode

Press the MODE key or X key to open the Icon selection window. Use arrow keys to choose a display mode and press the Checkmark key to enter it. If a mode is greyed out, check the SETUP menu to ensure it's enabled.

Various display modes on the ONWA KP-25, including Plotter, Compass, Wind, Navigation, Satellite, Highway, AIS, Fish, and Plotter/Fish, shown in both day and night modes.
Figure 5.4: Various display modes on the ONWA KP-25. This image illustrates different views such as Plotter, Compass, Wind, Navigation, Satellite, Highway, AIS, Fish, and a combined Plotter/Fish mode, each available in day and night settings.

5.5. Plotter Display Overview

5.5.1. Choosing the Zoom Display Range

Press the Zoom In (+) and Zoom Out (-) keys to adjust the display range on the PLOTTER.

5.5.2. Moving the Cursor

Use the cursor pad (arrow keys) to move the cursor. The cursor moves in the direction of the pressed arrow. Cursor position (latitude/longitude) and range/bearing from own ship are displayed in the top left corner.

5.5.3. Panning the PLOTTER Display

Use the cursor to pan the display. Place the cursor at the edge of the screen to initiate panning in the opposite direction of the cursor movement.

5.5.4. Centering Own Ship's Position

Press the X key to center the display on your own ship's position.

5.5.5. Map Settings

From the PLOTTER MENU, select "Map" to configure map layers. You can turn layers ON/OFF for elements like Place names, Nav aids, Lat/Lon grid, Tides, Ports, Tracks, Routes, Drawing, and Palette. Perspective View is only available for C-Map.

5.5.6. Heading Line

From the PLOTTER MENU, select "Heading Line" to set its display. Options include "Off", "Variable", "Max", "Timeline", or "HDG data". The length of the heading line can vary with SOG to show estimated destination points.

5.5.7. Cursor Display

From the PLOTTER MENU, select "Cursor" to choose between "Standard" or "Full Screen" display modes.

5.5.8. Ship Shape/Color

From the PLOTTER MENU, select "Ship shape/color" to customize your vessel's representation on the chart.

5.5.9. Range Circle

From the PLOTTER MENU, select "Range Circle" to turn it ON/OFF. If ON, you can manually input the radius.

5.5.10. Drawing Function

From the FUNCTION menu, select "DRAWING" to access drawing options. You can draw marks, lines, and place names. Press and hold the Checkmark key to enable the drawing mark function.

5.5.11. Palette

From the PLOTTER MENU, select "Palette" to choose display modes: "Normal", "Daylight", "Night", or "NOAA" (paper chart color).

5.5.12. Map Direction

From the PLOTTER MENU, select "Map Direction" to set the map orientation: "Normal", "North Up", "WPT Up", "Course Up", or "Head Up".

5.6. Track Management

The unit allows you to manage your boat's track data.

5.6.1. Change Track Color

Press and hold the MODE key on the Plotter screen to change the color of the current track.

5.6.2. Change Plotting Intervals

From MAIN MENU > Track record > Track record mode, you can choose plotting intervals by time, distance, or auto mode.

5.6.3. Save Current Track

From MAIN MENU > Track record > Save current track, you can save the current track for future use. You can change its color and name before saving.

5.6.4. Erase Track Data

From MAIN MENU > Erase, you can erase current track, saved tracks (by color or all), waypoints, routes, or drawing marks.

5.6.5. Transfer Saved Track to Route

You can transfer a saved track to a route for navigation. Select a starting and ending point from the saved track to convert it into a route.

5.6.6. Display Saved Track

From the PLOTTER MENU, select "Track" to turn ON/OFF the display of saved tracks and choose their color.

5.7. Waypoint and MOB (Man Overboard)

Waypoints can be entered by cursor position, own ship's position, or from the waypoint edit list.

5.7.1. Entering Waypoints

  • By Cursor: Place cursor, press Checkmark key, then choose "SAVE".
  • At Own Ship's Position: Momentarily press Checkmark key when no cursor is seen, then choose "SAVE".
  • From Waypoint List: From MAIN MENU > Edit > Waypoint, choose "NEW" or select an existing waypoint to edit.

5.7.2. Entering MOB Mark

Long press the MOB key on any display mode. This will create an MOB mark at your current position. You can then choose to save it as a waypoint or set it as a destination.

5.7.3. Editing Waypoints

From MAIN MENU > Edit > Waypoint, select a waypoint to edit its position, name, mark shape, and color.

5.7.4. Erasing Waypoints

From MAIN MENU > Edit > Waypoint, select a waypoint and choose "ERASE". You can also erase all waypoints from MAIN MENU > Erase > All waypoint/MOB.

5.8. Routes

5.8.1. Creating Routes

From MAIN MENU > Edit > Route, choose "NEW" to create a new route. Add waypoints from the list and save the route.

5.8.2. Editing Routes

From MAIN MENU > Edit > Route, select a route. You can "Change", "Remove", or "Insert" waypoints within the route.

5.8.3. Erasing Routes

From MAIN MENU > Edit > Route, select a route and choose "ERASE". You can also erase all routes from MAIN MENU > Erase > All routes.

5.9. Destination

The unit allows you to set various types of destinations for navigation.

5.9.1. Setting Destination by Cursor

Press the Function key (fx), choose "Goto cursor", then move the cursor to the desired location and press the Checkmark key to mark it as the destination.

5.9.2. Setting Destination by Waypoint (WPT)

Press the Function key (fx), choose "Goto WPT", select a waypoint from the list, and confirm.

5.9.3. Setting Route as Destination

Press the Function key (fx), choose "Goto route", select a route, and choose "Forward" or "Reverse" to traverse the waypoints.

5.9.4. Setting Track Data as Destination

Press the Function key (fx), choose "Goto track", select a saved track, and choose "Forward" or "Reverse" to start navigation along the track.

5.9.5. Canceling Destination

Press the Function key (fx), choose "Stop goto", and confirm.

5.9.6. Distance Measurement

Press the Function key (fx), choose "Distance" to activate the distance measurement function. You can measure distances between multiple points and save the measurement as a route.

5.10. Alarm Functions

The unit provides audio and visual alarms for various conditions.

5.10.1. Anchor Drag Alarm

Warns if your ship is moving when it should be at rest, exceeding a set range. Configure from MAIN MENU > Alarm > Anchor.

5.10.2. Arrival Alarm

Informs you when your ship is approaching its set destination. Configure from MAIN MENU > Alarm > Arrival.

5.10.3. XTE (Cross-Track Error) Alarm

Warns when your ship is off its intended course. Configure from MAIN MENU > Alarm > XTE.

5.10.4. Speed Alarm

Provides alerts when the ship's speed is higher or lower than the set range. Configure from MAIN MENU > Alarm > Speed.

5.10.5. Voltage Alarm

Warns when the input voltage is higher or lower than the set value. Configure from MAIN MENU > Alarm > Voltage.

5.10.6. Timer Alarm

Provides alerts when a set time has expired. Configure from MAIN MENU > Alarm > Timer.

5.10.7. Buzzer Type Selection

From MAIN MENU > Alarm > Buzzer, select between "Short" (two short beeps), "Long" (three long beeps), or "Constant" (continuous beeps).

5.11. Drawing Function

You can draw marks, lines, and place names on the plotter screen.

5.11.1. Drawing Marks

From FUNCTION menu > Drawing > Mark. Move the cursor to the desired position, press Checkmark, choose a symbol and color, then save.

5.11.2. Drawing Lines

From FUNCTION menu > Drawing > Line. Move the cursor to the start point, press Checkmark, move to subsequent points, and press X to finish. Save the line.

5.11.3. Drawing Place Names

From FUNCTION menu > Drawing > Place name. Move the cursor, press Checkmark, enter the name, choose a color, then save.

5.11.4. Erase or Edit Drawings

Move the cursor close to a drawing mark, line, or place name, then press Checkmark to open a pop-up menu to erase or edit.

5.12. Other Settings

Access these settings from MAIN MENU > Setup.

5.12.1. Map Scale

Change the map scale display format (Nm or Ratio).

5.12.2. Unit of Measurement

Set units for speed (nm, kt; km, kmh; sm, kph) and depth (meter, feet, fathom).

5.12.3. Bearing Reference (BRG. REF)

Choose between "True" or "Magnetic" bearing.

5.12.4. Magnetic Variation (MAG. VAR)

Set to "Auto" (pre-programmed) or "Manual" (user input).

5.12.5. Deviation

Input ship or map deviation manually to correct position errors.

5.12.6. Time

Set time difference from UTC and display format (12H or 24H).

5.12.7. TTG/ETA Speed

Choose "Auto" (GPS calculated speed) or "Manual" for time-to-go and estimated time of arrival calculations.

5.12.8. Key Beep

Turn key beep sound ON or OFF.

5.12.9. Wind Screen

Turn wind screen display ON or OFF.

5.12.10. GPS Setting

From SATELLITE screen > Output, choose GPS output data (OFF, NMEA0183, NMEA0183+AIS). From SATELLITE screen > Datum, select your desired datum.

5.12.11. NMEA Data Display

From MAIN MENU > Setup > NMEA data display, view NMEA input and output data. Press X to switch ports, Checkmark to stop/restart scrolling, and X to quit.

5.13. AIS Function (for KP-25A, KP-25X, KP-27A, KP-27X or with external AIS input)

The Automatic Identification System (AIS) provides information about other vessels.

5.13.1. Vessels List

From AIS screen > AIS detail list, view a list of all received AIS targets.

5.13.2. Collision Alarm

From AIS screen > CPA limit / TCPA limit, set values for Closest Point of Approach (CPA) and Time to Closest Point of Approach (TCPA). Enable the CPA/TCPA alarm.

5.13.3. Own Ship's Information

From AIS screen > AIS detail list, select the first line to view your own ship's AIS information.

5.13.4. Chart Screen

View all AIS vessels in real-time on the chart screen. Your own ship is a light blue hollow triangle. Class B vessels are blue hollow triangles, Class A vessels are green hollow triangles. Base stations are squares, and Aids to Navigation are diamonds.

AIS Targets Overlay in the Plotter Screen showing ship details and CPA/TCPA alarm information.
Figure 5.13.4: AIS Targets Overlay in the Plotter Screen. This image demonstrates how AIS targets are displayed on the chart, showing nearby vessels, their MMSI number, location, and detailed ship information upon selection, including CPA and TCPA alarms.

5.13.5. Emergency Alarm

Emergency alarm information is displayed at the bottom left corner. It cannot be deleted until acknowledged. The warning ship will be red and flashing.

5.13.6. Entry/Departure Setting

From AIS screen > Status, set to "In Port" or "Out Port" to temporarily shut down or restart the collision alarm.

5.13.7. AIS Vessel Display

From AIS screen > AIS vessel, choose "Fill" or "Line" display. Adjust size (Small, Medium, Large) from AIS screen > AIS vessel Line.

5.13.8. AIS Track Display

From AIS screen > AIS track display, enable or disable the display of AIS tracks on the plotter screen.

5.13.9. AIS Name Display

From AIS screen > AIS name, turn ON/OFF the display of AIS target names and adjust their size.

5.13.10. Plotter AIS Display

From AIS screen > Plotter AIS display, turn ON/OFF AIS targets display on the plotter screen. You can also display "NET" for ONWA AIS buoys.

5.13.11. AIS Track Recording

You can manually save the track record of an AIS target. From AIS screen > AIS track record, select "Manual AIS saved track". The maximum is 10 records.

5.14. Fishfinder Function (for KP-25F, KP-25X, KP-27F, KP-27X)

The fishfinder uses ultrasonic pulses to detect bottom conditions and fish schools.

5.14.1. Sounder Mode

From SOUNDER screen > Sonar mode, select display frequency: 200KHz, 50KHz, Dual (200KHz on right, 50KHz on left), 200KHz Zoom, or 50KHz Zoom.

Fishfinder display modes showing 50KHz, 200KHz, Dual, 50KHz/Zoom, and 200KHz/Zoom options.
Figure 5.14.1: Fishfinder display modes. This image illustrates the various sounder modes available, including 50KHz, 200KHz, Dual frequency, and zoom options for both frequencies, allowing users to select the best view for their needs.

5.14.2. Gain Adjustment

From SOUNDER screen > Gain, choose "Manual", "Fishing" (Auto 1), or "Cruising" (Auto 2) for automatic gain adjustments.

5.14.3. Range Adjustment

From SOUNDER screen > Range, choose "Manual" or "Auto". In manual mode, use arrow keys to increase or decrease depth range.

5.14.4. TVG (Time Variable Gain)

From SOUNDER screen > TVG, choose "Off" or "Manual". TVG compensates for propagation loss, displaying fish schools of the same size in the same color.

5.14.5. Picture Advance

From SOUNDER screen > Pic. advance, select the vertical scan line speed (e.g., 10/1 FAST, 1/8 SLOW).

5.14.6. Split Ratio

From SOUNDER MENU > Split ratio, set the ratio for split-screen displays (e.g., 50% for dual frequency).

5.14.7. Sonar Menu

From SOUNDER screen > Sonar menu, access settings for A-Scope, Zoom mode, Noise limiter, Hue selection, Signal level, and Marker.

5.14.8. Fishfinder Alarms

From SOUNDER screen > Alarm, configure alarms for Bottom, Fish, and Temperature. Set "From" (starting depth) and "Span" (depth range).

5.14.9. System Menu

From SOUNDER screen > System menu, configure Zoom marker, F/A level, and specific range scales (1-10).

5.14.10. Data Field

From SOUNDER screen > Data field, customize the data displayed on the right side of the screen.

5.14.11. Save History Echo

You can save the position of a history echo (e.g., fishing ground, wreck) into waypoint memory. Slightly press an arrow key to show a position vertical line, move it to the desired location, then press Checkmark to save.

5.15. N2K Function

The N2K functionality allows the device to connect to an N2K network for bidirectional data sharing.

5.15.1. Connecting to the N2K Network

A basic N2K network requires at least two terminating resistors, two extension cables, three T-connectors, and one power cord.

5.15.2. Data Sharing Settings

From SATELLITE MENU, configure whether to share GPS, Heading, Depth, Wind, Environment, and AIS data.

5.15.3. Data Reception Settings

From SATELLITE MENU, configure reception for GPS, Heading, Depth, Wind, and AIS data. For AIS, set "N2K AIS IN" to "ON". For other data types, select a data source priority and specific device.

5.16. Data Management

5.16.1. Output Data to External Equipment

Connect pin5+ (Green) and pin6- (BROWN) to the input of external equipment. From SATELLITE MENU > Output, select NMEA0183 sentences (GGA, GLL, RMC, etc.) and baudrate (4800, 9600, 19200, 38400).

5.16.2. Input NMEA0183 Sentences from External Equipment

Connect pin1+ (Yellow) and pin2- (White) to the output of external equipment. The input baudrate is auto-scanned.

5.16.3. Connecting a Temperature Probe

A 10K ONWA temperature probe or Airmar temperature sensor can be connected to display temperature on the sounder screen and data box. Connect to pin 2 (Temperature ground) and pin 4 (Temperature) of the XDUCER port.

5.16.4. Import and Export User Data (SD Card)

All user data (waypoints, routes, tracks, drawings) can be imported or exported via an SD card in ONWA Data Format (ODF). Access from MAIN MENU > Data > Data In/Out.

5.16.5. Record and Playback

Use the "Record data to SD" function (MAIN MENU > Data) to record navigational data (position, SOG, COG, AIS, depth). Use "Playback data from SD" to review recorded data.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your ONWA KP-25 Chart Plotter.

  • Cleaning: Gently wipe the display and unit exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents.
  • Software Updates: Check the manufacturer's website periodically for firmware updates to ensure you have the latest features and bug fixes.
  • Data Backup: Regularly back up your user data (waypoints, routes, tracks) to an SD card to prevent loss.
  • Connection Checks: Periodically inspect all cable connections (power, data, GPS antenna, transducer) for corrosion or damage. Ensure they are securely fastened.
  • Fuse Replacement: If the unit does not power on, check and replace the fuses as necessary, using only the specified type and rating.
  • Environmental Protection: While the unit is IPX6 waterproof, prolonged exposure to extreme conditions should be minimized. Ensure proper ventilation if installed in an enclosed space.

7. Troubleshooting

This section provides solutions to common issues you might encounter.

7.1. Common Issues and Solutions

  • Unit does not power on:
    • Check power cable connections.
    • Verify power supply voltage is within 10.5-35 VDC.
    • Check and replace fuses if blown.
    • Ensure the power switchboard is ON.
  • No GPS signal/position fix:
    • Ensure the GPS antenna is connected and has a clear view of the sky.
    • Check GPS settings in the SATELLITE MENU.
    • Verify SBAS is ON (default).
    • If using an external GPS, ensure it's properly connected and configured in NMEA data display.
  • Display is dim or unreadable:
    • Adjust brightness settings (short press Power key).
    • Switch between day/night display modes (Function key in brightness menu).
    • Ensure the unit is not exposed to direct sunlight for prolonged periods.
  • Fishfinder not displaying echoes (for F/X models):
    • Ensure the transducer is properly connected to the XDUCER port.
    • Check fishfinder settings (Gain, Range, TVG, Sonar mode).
    • Verify the transducer is submerged and free of marine growth.
  • NMEA data not transmitting/receiving:
    • Check NMEA0183 or NMEA2000 wiring connections.
    • Verify output/input settings and baudrates in SATELLITE MENU and NMEA data display.
    • Ensure external equipment is correctly configured to receive/transmit.
  • SD card import/export fails:
    • Ensure the SD card is properly inserted.
    • Verify the SD card contains ODF format data.
    • Try another SD card.

8. Specifications

8.1. Plotter Characteristics

  • Waypoints/Icons: 12000 user waypoints with name, symbol; 3 system waypoints (MOB, Start, Cursor); 10 proximity waypoints.
  • Routes: Max 30 routes, up to 170 waypoints each.
  • Tracks: 8000 points automatic track log; 10 saved tracks (up to 8000 track points each).
  • Drawing Marks: 1000
  • Drawing Lines: 2000
  • Drawing Placename: 1000
  • Color for drawing: 8
  • Alarms: XTE, Anchor drag, arrival, speed, voltage, proximity waypoint, timer and AIS (CPA and TCPA) alarm.
  • Palette: Normal, Daylight exposed to sunlight, Night in dark environment, NOAA paper chart color.
  • Tides: Built-in worldwide tide data.
  • Position format: LAT/LON.
  • Basemap: Worldwide.
  • External Map: Compatible with K-Chart2.0, K-Chart3.0, C-MAP MAX and Navionics+.
  • User data storage: Internal backup of user settings or external SD card.
  • Plot Intervals: 5sec to 60minutes or 0.01 to 10nm.
  • Plotting scales: 0.001 to 700nm.
  • Perspective View: ON/OFF (for C-Map only).
  • Celestial: Sunrise/Sunset Moonrise/Moonset.

8.2. AIS

  • Max number of AIS targets: 700 AIS targets display.
  • AIS target tracking: 10 Manually saved tracks (300 points each).
  • AIS alarm: CPA and TCPA.

8.3. GNSS Receiver

  • Receiver: 50 parallel channel GNSS receiver continuously tracks and uses up to 50 satellites.
  • GNSS: Support GPS, Beidou and GLONASS (for KP-25, KP-25F, KP-27, KP-27F). Support GPS and Beidou (for KP-25A, KP-25X, KP-27A, KP-27X).
  • Acquisition time: Cold start: 29 seconds; Hot start: 1 second.
  • Update rate: 1 sec or 0.1 sec selectable.
  • Accuracy: Position: 3 meters (95%) without S/A; Velocity: 0.1 meter/sec. without S/A.
  • Dynamics: Altitude: 18,000 meters; Velocity: 515 meter/sec.
  • Datum: WGS84, User define.
  • SBAS: Supported (for all models).
  • QZSS: Supported (for all models).

8.4. ClassB+ AIS Module (for KP-25A, KP-25X, KP-27A, KP-27X)

  • Frequency: 156.026MHz ~ 162.025MHz.
  • Technology: SOTDMA.
  • Channel Bandwidth: 25KHz.
  • Modulation: GMSK.
  • Data Rate: 9,600bps.
  • No. of Transmitter: 1.
  • No. of Receiver: 2.
  • TX Power Output: 5 Watt (37dBm +/-1.5dB).
  • RX Sensitivity: <-107dBm @20%PER.
  • RX Message Format: AIS Class A and B messages.
  • Comply Standard: IEC-62287 IEC-62287-2 Ed.2.0:2017.

8.5. HD Fishfinder Characteristics (for KP-25F, KP-25X, KP-27F, KP-27X)

  • Echo Color: 16 colors (including background color) according to echo intensity.
  • Basic Range: Meters: 5-1000; Feet: 15-3000; Fathoms: 3-600.
  • Range Shift: Up to 1000 meters (3000 feet, 600 fathoms).
  • Zoom Range: Times 2,3,4,6.
  • Bottom Lock Expansion: 5/10meters, 10/20feet, 2/5fathoms.
  • Auto Mode: Automatic adjustment of range and gain.
  • Display Mode: High Frequency (200KHz), Low Frequency (50KHz), Dual, Zoom (200KHz and 50KHz zoom) and A-scope Display.
  • Zoom Display: Marker Zoom, Bottom Zoom and Bottom-lock Expansion.
  • Display Advance Speed: (Lines/TX): Freeze, 1/8, 1/4, 1/2, 1/1, 2/1, 4/1, 6/1, 8/1, 10/1.
  • TX Frequency: 50 and 200kHz (alternately transmitted).
  • Power Output: 600W.
  • Interference Rejecter: Rejects unwanted signals.
  • Alarm: Fish and Bottom alarms, Temperature alarm (sensor required).

8.6. Physical Specifications

  • Size (KP-25 Series): 143.1(H)mm x 215.3mm(W) x 63.1mm(D).
  • Weight (KP-25): 0.8 Kg.
  • Display (KP-25 Series): 5 inches Color TFT day-view LCD 800 X 480 pixels.
  • Waterproofing: Display unit: IPX6; GPS antenna: IPX6.
  • Temperature range: Display unit: -15°C to +55°C; GPS antenna: -25°C to +70°C.
Table of GPS Receiver, GPS Interface, Equipment List, Power Supply, and Physical Specifications for ONWA KP-25 series.
Figure 8.6: Detailed specifications for GPS Receiver, GPS Interface, Equipment List, Power Supply, and Physical characteristics of the ONWA KP-25 series.

8.7. NMEA2000 Supported PGN

The device supports a wide range of NMEA2000 Parameter Group Numbers (PGN) for GNSS, AIS, Sounder, Navigation, and Environment data.

Table of NMEA2000 supported PGNs and their content for GNSS, AIS, Sounder, Navigation, and Environment categories.
Figure 8.7: NMEA2000 Supported PGNs. This table lists the various PGNs (Parameter Group Numbers) supported by the device, categorized by GNSS, AIS, Sounder, Navigation, and Environment, along with their respective content descriptions.

8.8. Shortcuts

The unit provides various shortcuts for quick access to functions.

  • Plotter Screen:
    • MODE: Change track color.
    • MENU: Turn track recording ON/OFF.
    • Checkmark: Activate User Mark drawing.
  • Fishfinder (Sounder) Screen:
    • MODE: Change Sonar mode.
    • Checkmark: Switch between Auto/Manual gain.
    • Arrow keys: Adjust manual gain, shift range, move VRM.
    • Function key (fx): Change Signal Level.
  • Plotter/Sounder Mode:
    • MENU: Change screen split ratio.
  • All Modes:
    • X: Enable graphic selection mode.

9. User Tips

To maximize your experience with the ONWA KP-25, consider the following:

  • Map Compatibility: The KP-25 is compatible with K-Chart, C-Map MAX, and Navionics+ charts. Ensure you have the appropriate charts loaded for your navigation area. K-Chart is free and offers worldwide coverage.
  • Data Backup: Regularly export your waypoints, routes, and tracks to an SD card. This is crucial for preserving your valuable navigation data.
  • NMEA Integration: Utilize the NMEA0183 and NMEA2000 capabilities to integrate with other marine electronics on your vessel, such as autopilots, AIS transponders, and external GPS antennas, for a comprehensive navigation system.
  • Fishfinder Optimization: For models with a built-in fishfinder, experiment with different sounder modes (50KHz, 200KHz, Dual) and gain settings (Manual, Fishing, Cruising) to best suit the water conditions and target species.
  • AIS Awareness: Pay attention to AIS alarms (CPA/TCPA) to maintain safe distances from other vessels, especially in busy waterways.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your authorized ONWA dealer or visit the official ONWA Marine Electronics website. Keep your purchase receipt as proof of purchase for any warranty claims.

11. Abbreviations and Glossary

This section defines common abbreviations and terms used in this manual and marine navigation.

11.1. Abbreviations

AbbreviationWord
AISAutomatic Identification System
AWAApparent Wind Angle
AWSApparent Wind Speed
B/LBottom Lock
BRGBearing
COGCourse Over Ground
CPAClosest Point of Approach
DSTDistance
ETAEstimate Time of Arrival
F/AFish Alarm
GNSSGlobal Navigation Satellite System
GPSGlobal Positioning Satellite / System
HDOPHorizontal Dilution of Precision
LATLatitude
LONLongitude
MAG.VAR.Magnetic Variation
MOBMan Overboard
NMEANational Marine Electronics Association
POSPosition
SBASSatellite-based augmentation system
SOGSpeed Over Ground
TCPATime to Closest Point of Approach
TTGTotal Time to Go
TVGTime Variable Gain
TWATrue Wind Angle
TWDTrue Wind Direction
TWSTrue Wind Speed
XTECross Track Error

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.