1. Introduction
The CPVAN Outdoor Solar Strobe Siren is a sophisticated security device designed to enhance your home or premises' safety. This siren features a built-in rechargeable battery powered by solar energy, offering a cable-free and flexible installation. It supports both wireless and wired signal transmission, making it adaptable to various alarm systems.
Equipped with infrared sensing and low power consumption technology, the siren is ideal for outdoor conditions, providing long-term standby, anti-EMI, anti-false alarm capabilities, and IP65 water resistance. It is widely applicable in villas, communities, shops, factories, schools, and banks.
Important Note: This alarm is an accessory and requires an alarm host (e.g., CP10/CP10 Pro/CP10 Pro LoRa alarm system) to function. It cannot be used as a standalone device. The wireless distance with the LoRa version host is 60-100 meters.
2. Features
- Supports 20 wireless defense zones and 2 wired defense zones.
- Compatible with up to 5 remote controllers.
- Integrated tamper alarm for enhanced security.
- Produces both acoustic and light alarms.
- Wireless coding for easy addition of new accessories.
- One-button operation for Arm, Home Arm, SOS, and Disarm functions.
- Efficient solar power charging (24mA under 2000LUX conditions).
- Memory retention for paired accessories even after power outage.
- Built-in high capacity 3.7V 1000mA lithium battery.
- IP65 water resistance for outdoor durability.
- Sound level of 110dB.
3. Technical Specifications
| Parameter | Value |
|---|---|
| External Power Input | DC5V/1A |
| Solar Panel Output | 5.0V |
| Standby Current | < 1 mA |
| Alarm Current | < 150mA |
| Sound Level | > 100dB |
| Wireless Reception Range | > 100m (in open space) |
| Wireless Frequency | 433MHz |
| Water Resistance | IP65 |
| Wireless Coding | EV1527/2262 supported |
| Backup Battery | 3.7V 1000mA Lithium battery |
| Working Temperature | -20°C - 55°C |
| Working Humidity | 40%-80% (non condensing) |
| Dimension | 164.3 × 124.3 × 59mm |
4. Setup
4.1. Initialization
Plug the power adapter (DC5V/1A) into an outlet. Then, flip the power switch on the bottom of the siren. The built-in buzzer will sound twice, and the indicator will flash twice, indicating successful initialization.
4.2. Installation
For optimal wireless reception, install the siren at a central location within your house or premises.
- Screw the mounting plate onto the wall using the provided screws and anchors. Ensure the 'ears' of the plate are at the top.
- Attach the siren to the mounting plate by aligning it and pulling it downwards until it clicks securely into place.
4.3. Jumper Settings
Jumper settings allow customization of the siren's behavior. Note: Any changes to jumper settings will only take effect after a power cycle.
- **Alarm Tone Selection (JP2, JP3)**:
- Police Tone: No jumper on JP2 and JP3.
- Fire Alarm Tone: Jumper on JP2.
- Ambulance Tone: Jumper on JP3.
- **Siren Duration Selection (JP1)**:
- 5 minutes: No jumper on JP1.
- 1 minute: Jumper on JP1 (Pin1 and Pin2).
- 3 minutes: Jumper on JP1 (Pin2 and Pin3).
- **Infrared (JP5)**:
- Enable Infrared: Jumper on JP5.
- Disable Infrared: No jumper on JP5.
- **Siren Mode Selection (JP4)**:
- Acoustic and Light Alarm: Jumper on JP4.
- Light Only Alarm: No jumper on JP4.
(Refer to the original user manual for detailed diagrams of jumper positions.)
4.4. Pairing Remote Controllers
- Press and hold the 'SET' button until the siren sounds and flashes once. Release the button; the siren will flash quickly, indicating pairing mode.
- Press any button on the remote control to send a signal. The siren will sound twice if the signal is successfully learned.
- To pair additional remote controllers, repeat step 2.
- If no signal is received within 10 seconds, the siren will exit pairing mode.
4.5. Pairing Wireless Detectors
- Press and hold the 'SET' button until the siren sounds and flashes twice. Release the button; the siren will flash quickly, indicating pairing mode.
- Trigger the wireless detector to emit a signal. The siren will sound twice if the signal is successfully learned.
- To pair additional detectors, trigger the next detector.
- If no signal is received within 10 seconds, the siren will exit pairing mode.
4.6. Setting as a Wireless Siren
- Press and hold the 'SET' button until the siren sounds and flashes three times. Release the button; the siren will flash quickly, entering pairing mode.
- Trigger your alarm control panel to emit a signal. The siren will sound twice if the signal is successfully learned.
4.7. Connection for Wired Zones
The siren supports two wired zones via the CN1 terminal:
- Wired Zone 1: Connect Z0 to GND.
- Wired Zone 2: Connect Z1 to GND.
(Refer to the original user manual for detailed diagrams of wired zone connections.)
4.8. Deleting All Accessories
To delete all paired remote controllers and detectors:
- Press and hold the 'SET' button until the siren sounds and flashes four times.
- Release the button; the siren will sound twice, indicating that all accessories have been deleted.
5. Operation
5.1. Siren Status
- Armed Status: All connected accessories can trigger the siren.
- Disarmed Status: Only accessories configured in the SOS zone can trigger the siren.
- Alarm Status: The strobe siren will activate. It will automatically exit alarm status after the preset siren duration if no manual operation occurs.
5.2. Remote Controller Functions
The remote controller allows you to manage the siren remotely:
- Away Arm: Press the [lock icon] button to arm the system when you are leaving home.
- Disarm: Press the [unlock icon] button to disarm the system.
- Stay Arm: Press the [partial arm icon] button to arm the system when you are at home.
- SOS: Press the [SOS button] to immediately activate the strobe siren.
6. Maintenance
- Solar Panel: Regularly clean the solar panel surface to ensure maximum energy efficiency. Dust, dirt, or debris can reduce charging performance.
- Battery: The siren is equipped with a built-in rechargeable lithium battery. Ensure the solar panel receives adequate sunlight for optimal battery life. The system includes a low power alert feature to notify you when the battery needs attention.
- Exterior Cleaning: Clean the siren's exterior with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the casing or solar panel.
- Environmental Conditions: While the siren is IP65 water-resistant, avoid prolonged exposure to extreme weather conditions outside its specified working temperature and humidity ranges.
7. Troubleshooting
- Siren not pairing with accessories: Ensure the siren is in pairing mode (flashing quickly). If no signal is received within 10 seconds during pairing, the siren will exit pairing mode. Re-initiate the pairing process.
- Jumper settings not taking effect: Remember that any changes made to the jumper settings (Alarm Tone, Siren Duration, Infrared, Siren Mode) will only become effective after a power cycle (turning the device off and on again).
- False alarms: The siren is designed with anti-false alarm technology. If false alarms occur, check for environmental factors that might trigger sensors (e.g., strong winds, moving objects if using motion detectors). Ensure proper installation and positioning of detectors.
- Low battery alert: If you receive a low power alert, ensure the solar panel is clean and receiving sufficient direct sunlight. If the issue persists, the battery may need replacement or further charging via the DC5V/1A power adapter.
- No sound/light during alarm: Check jumper settings for Siren Mode Selection (JP4) to ensure both acoustic and light alarms are enabled if desired. Verify the siren is properly powered.
8. User Tips
- Connectivity: This siren operates on a 433MHz wireless frequency and does not use WiFi for connectivity. Ensure your alarm host and other accessories are compatible with this frequency.
- Optimal Solar Charging: Position the siren where its solar panel can receive maximum direct sunlight throughout the day, ideally at a 45-degree angle, to ensure continuous power and long-term standby.
- System Compatibility: Always verify that this siren is compatible with your specific alarm host model (e.g., CP10/CP10 Pro/CP10 Pro LoRa) before integration.
9. Warranty and Support
9.1. Warranty Information
- This product comes with a one-year warranty from the date of purchase.
- To request warranty service, please provide your warranty card along with the purchase receipt.
- Damages caused by misuse are not covered under warranty.
- Always refer to this user manual for proper usage.
- Warranty exemptions include damages caused by unauthorized dismantling, repairing, refurbishing, or acts of God. Users are responsible for any consequential damages in this regard.
9.2. Additional Resources
A detailed user manual in PDF format is available for download. For further assistance, please refer to the official documentation.
You can access the PDF user manual here.
10. Safety Information
- Ensure the power adapter used for initialization is DC5V/1A. Using an incorrect power supply may damage the device.
- Do not attempt to dismantle, repair, or refurbish the siren yourself, as this will void the warranty and may cause damage or injury.
- Keep the device within the specified working temperature (-20°C to 55°C) and humidity (40%-80% non-condensing) ranges to ensure optimal performance and longevity.
- While the siren is IP65 water-resistant, it is not fully waterproof. Avoid submerging the device in water or exposing it to high-pressure water jets.
- Keep out of reach of children and pets.