Honda Shadow ACE 750 VT750C VT750CD Deluxe

Contents

Motorcycle Duals Exhaust System

For HONDA Shadow ACE 750 VT750C (1997-2003) & VT750CD Deluxe (1998-2003)

Model: Shadow ACE 750 VT750C VT750CD Deluxe

1. Product Overview

This product is a core component of a motorcycle exhaust system, designed to guide engine exhaust gases, reduce noise, and optimize exhaust efficiency. It complies with EU motor vehicle accessory safety and environmental standards.

Applicable Models:

  • HONDA Shadow ACE 750 VT750C (1997-2003)
  • HONDA VT750CD Deluxe (1998-2003)

This exhaust system is suitable for street-legal motorcycles with displacements between 125cc and 1000cc. It is intended for road use only and is not suitable for racing or modified vehicles that exceed EU regulatory limits.

Honda Shadow ACE 750 Duals Exhaust System in black and silver finishes
Figure 1.1: Honda Shadow ACE 750 Duals Exhaust System, showing both black and silver options with mounting hardware. Compatible with VT750C (1997-2003) and VT750CD Deluxe (1998-2003) models.

2. Specifications

Attribute Value
Motobike Make Honda
Material Iron
Special Features Modified Full Systems Exhaust
External Testing Certification ISO9001
High-concerned chemical None
Origin Mainland China
Package Length 75 cm
Package Width 30 cm
Package Height 20 cm
Package Weight 5.5 kg
Weight comparison of black and silver exhaust systems
Figure 2.1: Weight comparison of the black (4.830 KG) and silver (4.540 KG) exhaust systems.

3. Safety Information

Please read and understand all safety warnings before installation and use.

  • High Temperature Warning: The surface temperature of the exhaust pipe can reach 300-600°C during engine operation and up to 1 hour after shutdown. Do not touch to avoid burns. Do not remove heat shields if installed.
  • Installation Safety: Always disconnect the battery negative terminal during installation to prevent electrical shorts. Wear protective gloves and safety glasses when using tools to prevent tools from slipping or parts from splashing.
  • Exhaust Gas Safety: Exhaust leaks can release toxic gases like carbon monoxide. Always start the engine in a well-ventilated area. If you smell exhaust gas while driving, stop immediately, inspect for leaks, and resolve the issue before continuing to drive.
  • Tightening Warning: Regularly check the tightness of the exhaust pipe mounting bolts. If any looseness is found, tighten them promptly to prevent the exhaust pipe from detaching during high-speed driving, which could lead to accidents.
  • Child Warning: Keep the product and installation tools away from children to prevent them from touching hot parts or ingesting small components.

4. Installation Instructions

4.1. Installation Prerequisites

  • Installation should be performed by personnel with motorcycle repair qualifications or relevant professional skills to avoid safety hazards from unprofessional installation.
  • Before installation, ensure the motorcycle engine is turned off and has cooled down for at least 30 minutes.
  • Disconnect the battery's negative terminal.
  • Keep away from flammable materials.

4.2. Installation Steps

  1. Remove Old Exhaust Pipe: Use specialized tools to loosen the connecting bolts between the old exhaust pipe and the engine cylinder head, the mid-section fixing clips, and the tail section bracket. Carefully remove the old exhaust pipe.
  2. Clean Mounting Surfaces: Wipe the engine cylinder head exhaust port and the fixing bracket contact surfaces with a non-corrosive cleaner to remove oil and rust.
  3. Install New Exhaust Pipe:
    • Install the front, middle (if applicable), and tail sections of the new exhaust pipe in sequence.
    • Ensure interfaces are aligned and gaskets are properly seated (no displacement or damage).
    • Use a torque wrench to tighten all connecting bolts to the specified torque (reference value: 25-30 N·m, refer to your motorcycle's service manual for specific values). Avoid overtightening or undertightening.
  4. Check Installation:
    • Confirm that the exhaust pipe is not loose or significantly displaced, and there is no friction or interference with other parts of the vehicle.
    • Reconnect the battery's negative terminal.
    • Start the engine and check for exhaust leaks at the interfaces (you can apply soapy water to detect bubbles). Ensure there is no exhaust gas leakage.
Black exhaust pipes for installation
Figure 4.1: Black exhaust pipes, ready for installation.
Silver exhaust pipes for installation
Figure 4.2: Silver exhaust pipes, ready for installation.

5. Operating Instructions

Once properly installed, this exhaust system operates automatically with your motorcycle's engine. No specific user interaction is required beyond regular motorcycle operation.

5.1. Usage Limitations

  • Prohibited Modifications: Do not cut, weld, drill, or remove the exhaust pipe's silencer or catalytic converter (if present). Doing so will violate EU ECE R48 noise limit regulations and environmental standards.
  • Prohibited Over-range Use: Do not use this product on motorcycles with displacement outside the specified range (125cc-1000cc) or on off-road vehicles (e.g., dirt bikes, racing motorcycles).
  • Prohibited Operations: Do not touch the exhaust pipe when it is hot. Do not start the engine for extended periods in enclosed spaces (such as garages) to avoid carbon monoxide accumulation.
  • Material Limitations: This product is not resistant to strong acids or alkalis. Avoid contact with industrial chemicals, seawater, and other corrosive environments.

6. Maintenance

  • Regular Inspection: Every 5000 kilometers or 3 months, check the tightness of the exhaust pipe connecting bolts, the sealing condition of the interfaces, and for any surface damage or rust.
  • Cleaning and Care: Wipe the surface with a dry cloth or neutral cleaner to remove dust and oil stains. Avoid directly flushing the inside of the exhaust port with high-pressure water to prevent moisture retention and rust.
  • Service Life: Under normal use conditions, the product's service life is 3-5 years (depending on the operating environment). It is recommended to replace the product promptly if its service life is exceeded.

7. Troubleshooting

  • Abnormal Noise, Leaks, or Severe Rust: If you experience abnormal exhaust noise, gas leaks, or severe rust, stop using the product immediately. Contact a professional repair facility or the manufacturer for after-sales service. Do not continue to use the product in such conditions.

8. User Tips

  • Check Length: Before purchasing or installing, verify the length of the exhaust system against your motorcycle's requirements to ensure proper fitment.
  • Gasket Replacement: Always use new gaskets when installing a new exhaust system to ensure a proper, leak-free seal.
  • Post-Installation Check: After the first few rides, re-check all mounting bolts for tightness as vibrations can sometimes cause them to loosen slightly.

9. Compliance and Regulations

9.1. Compliance Markings

  • CE Mark: This product has passed relevant EU tests and complies with EU motor vehicle accessory requirements. The mark size is ≥5mm and clearly legible.
  • Environmental Mark: Complies with EU RoHS 2.0 regulation (2011/65/EU), restricting the content of harmful substances such as lead, mercury, and cadmium.
CE Mark on product packaging
Figure 9.1: Example of CE Mark on product packaging.

9.2. Applicable Regulations and Harmonized Standards

  • EU General Product Safety Regulation (GPSR, Regulation (EU) 2021/2402), effective December 13, 2024.
  • Motor Vehicle Noise Limit Regulation (ECE R48).
  • Motor Vehicle Emission Related Standards (ECE R92).
  • Restriction of Hazardous Substances Regulation (RoHS 2.0, 2011/65/EU).
  • Machinery Directive Harmonized Standard (EN ISO 12100:2010).

A detailed user manual (PDF) is available for further reference: View User Manual (PDF)

10. Warranty & Support

For technical support, warranty claims, or any questions regarding this product, please contact the manufacturer or the EU Responsible Person using the details below:

Manufacturer Information:

  • Name: Chuangyou Hardware Products Factory
  • Address: U2-9, Yongle Industrial Zone, Jiangshui Road, Third Industrial Park, Shuikou Town, Kaiping City, China
  • Phone: +8615999588481
  • Email: 591919490@qq.com

EU Responsible Person Information:

  • Name: SUCCESS COURIER SL
  • Address: CALLE RIO TORMES NUM.1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
  • Contact: successservice2@hotmail.com
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.