Bluavido 9.66" IPS Triple-Channel Car DVR User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Bluavido 9.66" IPS Triple-Channel Car DVR. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Figure 1: Bluavido 9.66" IPS Triple-Channel Car DVR with WiFi and app control interface.

2. Safety Warnings

• Keep out of reach of children.
• In case of ingestion, seek medical attention immediately.
• Do not insert or remove the TF card while the device is working to avoid damage.
• Ensure correct orientation when inserting the TF card. Incorrect insertion may damage the device and the TF card.
• If the TF card is incompatible, reinsert it or try another TF card.

3. Product Overview

3.1 Appearance and Button Function Description

The device features a 9.66-inch IPS display and multiple cameras for comprehensive vehicle monitoring.

1. Power Key / OK Key: Used for power on/off and confirming selections.
2. 9.66-inch MIPI Display: Main display screen.
3. Front Camera: Records the view ahead of the vehicle.
4. Speaker: For audio output.
5. Reset Key: Used to reset the device in case of freezing.
6. USB Interface: For power connection.
7. AV-IN Rear Camera Interface: Connects to the rear camera.
8. TF Card Slot: For inserting the memory card.
9. Reserved Hole: For specific mounting or accessory purposes.

3.2 Button and Interface Function Introduction

Power Key

• Function 1: Power On/Off
  Long press the power key for 3 seconds to manually turn the device on or off.
• Function 2: One-Click Screen Backlight On/Off
  Short press the power key to turn the display backlight on or off. This function does not affect the recording process.

Reset Key

If the recorder freezes, short press the reset key to power off the device. To reset the device, insert a needle into the small hole and press the internal reset key.

USB Power Interface

Connect to a DC 5V power supply.

Rear Camera Interface

Connect to the rear camera via the AV-IN port.

4. Installation Guide

1. Turn off the car engine.
2. Insert the TF card into the recorder's card slot.

   Note: Use a high-speed TF card (Class 10 or above) with a minimum capacity of 8GB. The maximum supported TF card capacity is 64GB. (Refer to specifications for potential discrepancies, some documentation may state 32GB maximum).

3. Fix the recorder on the car's original rearview mirror.
4. Insert the car charger into the car's cigarette lighter.
5. Connect the recorder's USB interface to the car charger using the extension charging cable.

   Note: Route the extension charging cable along the edge of the car's windshield for a neat installation.

6. Install the rear camera at the rear of the vehicle, paying attention to its direction. Route the cable along the vehicle's ceiling. After installation, insert the rear plug into the recorder's AV-IN interface.
7. Adjust the lens position to ensure the lens is level with the ground.
8. Start the engine and check for correct installation.

   Note: If installed correctly, the system working indicator light will be on, the device will start and enter recording state, and the recording indicator light will flash. Check if the picture on the display is normal. If the displayed picture is inverted, contact support. For first use, format the TF card in the device menu.

Figure 2: Backup camera display with parking guide lines for safe parking.

Figure 3: The 1080P Full HD front camera captures clear license plates even at high speeds.

5. Operation

5.1 Main Interface Introduction

Tap the recorder's screen to enter recording mode from the main interface.

• Tap the dashcam icon to enter recording mode.
• Tap the photo mode icon to enter photo mode.
• Tap the playback mode icon to enter playback mode to view videos and photos.
• Tap the menu settings icon to enter function settings mode.

Figure 4: The dash cam supports 3-channel recording: Front (1080P), Cabin (720P), and Rear (720P).

5.2 Driving Recording Function

Tap "Dashcam" on the main interface to enter the recording interface. The REC icon in the upper left corner of the screen flashes during recording.

• Tap the record icon to start recording; tap it again to stop recording.
• During recording, tap the snapshot icon to take a photo.
• During recording, tap the lock icon to lock the current video, preventing it from being overwritten.
• Tap the volume icon to turn the volume on/off.
• Tap the return icon to go back to the main interface.

Note: Video and photo files from the front and rear cameras are stored in the "DCIMA" and "DCIMB" folders, respectively, under the "DCIM" directory on the TF card.

5.3 Photo Function

1. Tap "Photo" on the main interface to enter photo mode. The device automatically enters recording after startup. To enter photo mode from the main interface, tap the return icon and then select photo mode. The photo mode is active when an icon appears in the upper left corner of the screen.
2. When you tap the snapshot icon, a picture preview will appear, and the photo will be taken after about 1 second. Hold the camera steadily to avoid affecting picture quality.

5.4 Video Playback

1. Tap "Playback" on the main interface to enter playback mode. The device enters automatic recording after startup. To enter playback mode from the main interface, tap the return icon and then select playback.
2. Tap a video file to play or pause.
3. Use the scroll icons to navigate up and down through files and photos.
4. Tap the menu icon to enter the playback menu.

5.5 One-Click Lock Function

During recording, tap the lock icon to lock the current video. Locked files will have a lock indicator and will not be overwritten, protecting important footage.

5.6 Camera Screen Switching Function

Swipe left or right on the recording interface to switch between the front/rear camera view and picture-in-picture mode.

5.7 Time/Date Setting

From the main interface, tap "Menu Settings", then "Function Settings", and finally "Time/Date" to set the correct time and date. This is crucial for accurate evidence in case of traffic incidents.

5.8 Motion Detection Function

Tap "Settings" on the main interface, then "Motion Detection" to toggle the function on/off. When enabled, a "F" mark appears on the recording interface. If the front lens detects movement, the device will automatically start recording. Recording stops when no movement is detected.
Tip: For continuous motion detection, ensure the device remains powered on. Exit motion detection in settings when recording is stopped.

5.9 Collision Sensing Function (G-Sensor)

The device has a built-in G-sensor. From the main interface, tap "Menu Settings", then navigate to "Driving Collision Sensitivity" to adjust the G-sensor settings. When enabled, the device automatically locks the current video if significant vibration (e.g., a collision) is detected during recording.
Tip: Sensitivity can be set to High, Medium, or Low based on your preference.

5.10 Parking Monitoring Function

From the main interface, tap "Function Settings", then "Parking Monitoring Settings" to enable this feature. A "P" mark will appear on the recording interface. If the car experiences slight vibration while shut down, the recorder will automatically turn on, record, and lock the video. This locked video will not be overwritten. The device will automatically shut down 30 seconds after recording.

5.11 Reverse Image

To use this feature, ensure the car charger is connected to the recorder, the rear camera is plugged into the AV-IN socket, and the rear camera's black and red wires are connected to the reverse light. When reversing, the device will automatically display the reverse image. It will return to recording mode once reversing is complete.

Figure 5: Key features: Loop Recording, G-sensor Lock, and 24/7 Parking Mode.

Figure 6: Super Night Vision capabilities with F1.8 aperture, 4 IR lights, WDR, and Sony sensor for low-light conditions.

6. User Tips

• Memory Card Compatibility: While some product information mentions support for up to 128GB, the installation notes in this manual state a maximum supported TF card capacity of 64GB. For optimal performance and to avoid data loss, it is recommended to use a Class 10 or higher TF card within the 64GB limit, and format it regularly.
• Charging Cable Type: The device uses a MINI USB interface for power. It is not a Type-C USB. Ensure you use the correct cable to prevent damage.
• Initial Setup: Always format the TF card through the device's menu during the first use to ensure proper compatibility and functionality.
• Time Synchronization: Set the correct time and date immediately after installation to ensure accurate timestamps on your recordings, which is vital for evidence.

7. Troubleshooting: System Error Messages

8. Product Specifications

Note: The company reserves the right to change the design and specifications without prior notice. For a comprehensive list of functions and settings, please refer to the official user manual PDF: Bluavido K62-6247 User Manual (PDF).

9. Maintenance

• Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• TF Card Care: Regularly format your TF card (at least once a month) to maintain optimal recording performance and prevent data corruption. Back up important files before formatting.
• Firmware Updates: Check the manufacturer's website periodically for any available firmware updates to improve performance and add new features.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

For additional resources, you may refer to the official user manual PDF: Bluavido K62-6247 User Manual (PDF).