1. Product Overview
This manual provides essential information for the safe and effective installation and operation of the JHao Xin Lemon Yellow DRL (Daytime Running Light) Angel Eyes Light Chips designed for BMW X3 (F25) and BMW X4 (F26) models manufactured between 2014 and 2017. These chips serve as a replacement part for your vehicle's headlights, providing a distinct lemon yellow light.
The product includes four LED circuit boards and a tube of heatsink plaster for installation.
2. Safety Warnings
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
Important: This is a highly specialized operation. Be sure to find a professional installer. Beginners should not attempt to install it.
3. Package Contents
The package contains the following items:
- 4 x Lemon Yellow DRL Angel Eyes Light Chips (LED circuit boards)
- 1 x Tube of Heatsink Plaster
4. Specifications
| Attribute | Value |
|---|---|
| Product Name | Car Light Accessories (DRL) |
| Model Name | F25 F26 |
| Brand Name | JHao Xin |
| Item Type | Angel Eyes |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Length | 18 cm |
| Package Width | 15 cm |
| Package Height | 3 cm |
| Package Weight | 0.075 kg |
5. Setup and Installation
WARNING: This is a highly specialized operation that requires professional expertise. Attempting installation without proper knowledge and tools may result in damage to your vehicle or personal injury. It is strongly recommended to seek assistance from a qualified professional installer.
The following steps outline the general procedure for installing the DRL Angel Eyes Light Chips:
- Disassemble Headlights: Carefully disassemble the car headlights from the vehicle.
- Heat Headlights: Heat the headlights to a temperature between 90°C and 150°C. The exact temperature may vary depending on the type of adhesive used in your specific headlight assembly.
- Separate Components: After heating, apply a suitable headlight solution to help separate the lens from the rear housing. Once separated, remove the original DRL components.
- Install Replacement Chips: Position the new DRL Angel Eyes Light Chips as replacement parts. Ensure proper alignment and connection.
- Reassemble with Sealant: Reassemble the headlight unit, using appropriate sealant to ensure a watertight and secure fit.
Installation Video
Refer to the following video for a visual demonstration of the LED chip functionality and testing:
6. Operating Instructions
Once professionally installed, the DRL Angel Eyes Light Chips will function as your vehicle's daytime running lights, emitting a distinctive lemon yellow light. Their operation is integrated with your vehicle's existing DRL system.
- The DRLs will activate automatically when your vehicle is running, as per your car's factory settings for daytime running lights.
- No manual intervention is typically required for their basic operation after installation.
7. Maintenance
To ensure the longevity and optimal performance of your DRL Angel Eyes Light Chips:
- Regularly inspect your headlights for any signs of moisture ingress or damage to the lens.
- Clean the headlight lenses periodically with a soft cloth and appropriate automotive cleaning solution to maintain light output clarity.
- Avoid using harsh chemicals or abrasive materials on the headlight assembly.
- If you notice any flickering or dimming of the lights, consult a professional automotive technician.
8. Troubleshooting
If you encounter issues with your DRL Angel Eyes Light Chips, consider the following general troubleshooting steps:
- Lights not turning on: Check your vehicle's DRL settings. Ensure all connections made during installation are secure and free from corrosion.
- Flickering lights: This could indicate a loose connection or an issue with the vehicle's electrical system. Professional inspection is recommended.
- Dim lights: Ensure the headlight lenses are clean. If the issue persists, it may indicate a component failure, requiring professional diagnosis.
For complex issues, always consult a professional automotive electrician or the manufacturer.
9. User Tips
While no specific user tips were available from external sources, general advice for DRL modifications includes:
- Always double-check compatibility with your specific BMW X3 (F25) or X4 (F26) model year (2014-2017) and headlight configuration (Hernia or High Configuration).
- Consider documenting the installation process with photos or notes, especially if performed by a professional, for future reference.
- Ensure the heatsink plaster is applied correctly to aid in thermal management and extend the lifespan of the LED chips.
10. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the manufacturer directly:
Manufacturer: Yiwu Xinyu Trading Co., LtdAddress: Room 503, No. 22, Liuruitang Road, Choujiang Street, Yiwu City, Zhejiang Province, China
Email: 512881048@qq.com
EU Authorized Representative: MJCM SARL
Address: 78 avenue des Champs Elysees Bureau 326
For additional item guides and documents, you may refer to the official PDF manual if available: User manual (PDF).