diymore Electric Vehicle Brushless Controller

Contents

Universal Intelligent Dual-mode Electric Vehicle Brushless Controller User Manual

Model: Electric Vehicle Brushless Controller | Brand: diymore

This manual provides detailed instructions for the installation, operation, and maintenance of your new brushless controller.

Product Overview

The 48V 60V 64V 72V 1200W-1500W Universal Intelligent Dual-mode Electric Vehicle Brushless Controller is designed for a wide range of electric vehicles, including bicycles, tricycles, and modified vehicles. It features a high-strength aluminum alloy casing for durability and excellent heat dissipation, ensuring stable operation and extended service life. The controller integrates intelligent functions such as cruise control, three-speed adjustment, and comprehensive voltage protection for the battery and motor.

Brushless Controller with wires
Image: The brushless motor controller, showcasing its robust design and numerous connection wires.
Video: A 22-second overview of the brushless motor controller, demonstrating its physical appearance and various wire connections.

Setup and Wiring

Before installation, ensure the vehicle's power is off. Connect the controller according to the wiring diagram provided. Each interface is functionally labeled to facilitate connection from scratch.

Controller with labeled interfaces
Image: The controller showing its various labeled interfaces for easy connection.

Wiring Diagram

Detailed wiring diagram for the brushless controller
Image: Detailed wiring diagram illustrating each connection point on the controller. Refer to the list below for specific functions.
  1. Guide instrument
  2. High-battery braking
  3. Anti-theft alarm
  4. Cruise signal
  5. Motor A
  6. Motor B
  7. Motor Hall
  8. Patrol the route
  9. Three-line crank
  10. Low battery braking
  11. Motor
  12. Three-speed transmission
  13. Option line
  14. Reverse
  15. Power supply negative
  16. The power supply is positive
  17. Anti-theft power supply
  18. Learning Line
  19. Cyclic ground wire
  20. Electric door lock

Ensure all connections are secure and correctly matched to prevent damage to the controller or vehicle components.

Operating Instructions

The controller supports several intelligent functions for enhanced driving experience:

  • Three-speed Control: Adjust the vehicle's speed settings (low, medium, high) using the dedicated three-speed transmission connection.
  • Intelligent Cruise: Activate the intelligent cruise function for consistent speed maintenance, reducing rider fatigue.
  • Anti-theft Alarm: Connect an anti-theft alarm system for added security.
  • Braking: The controller supports both high battery braking and low battery braking for safety and battery protection.
  • Reverse Function: Utilize the reverse function for easy maneuvering.
  • Display Compatibility: Compatible with both LCD digital displays and pointer meters for real-time vehicle information.

Always refer to your vehicle's specific wiring and display unit instructions for full compatibility and functionality.

Maintenance

To ensure the longevity and optimal performance of your brushless controller, follow these maintenance guidelines:

  • Cleaning: Keep the controller clean and free from dust and debris. Use a dry, soft cloth for cleaning. Avoid using liquids directly on the controller.
  • Heat Dissipation: Ensure the controller's aluminum alloy casing has adequate airflow for heat dissipation. Do not obstruct the cooling fins.
  • Connections: Periodically check all cable connections for tightness and signs of wear or corrosion. The stiffening screws are fixed with waterproof thermally conductive adhesive for enhanced durability.
  • Environmental Protection: While the controller is splash-proof, avoid prolonged exposure to heavy rain or submersion in water.
Controller highlighting thickened aluminum case, stiffening screw, and superior wire
Image: Features like the thickened aluminum case, stiffening screws with waterproof adhesive, and pure copper wires contribute to the controller's durability and performance.

Troubleshooting

If you encounter issues with your controller, consider the following general troubleshooting steps:

  • No Power: Check all power connections, including the main power supply (positive and negative) and the electric door lock connection. Ensure the battery is charged.
  • Motor Not Responding: Verify motor connections (Motor A, Motor B, Motor Hall) and the throttle voltage connection. Check the "Learning Line" for proper function if applicable.
  • Incorrect Speed: Ensure the three-speed transmission connection is correctly wired and functioning.
  • Braking Issues: Check the high-battery and low-battery braking connections.
  • Alarm Malfunction: Verify the anti-theft alarm connection.

For complex issues, it is recommended to consult a qualified technician or refer to the detailed PDF user manual.

Specifications

AttributeValue
Brand Namediymore
Model NumberElectric Vehicle Brushless Controller
Working Voltage48V, 60V, 64V, 72V (Universal)
Rated Power1200W - 1500W
Current45A
MOS TubeSKST049N08
Product Size (L*W*H)215mm * 83mm * 40mm (8.46in * 3.26in * 1.57in)
MaterialHigh-strength Aluminum Alloy
CertificationCE
EU LVD VoltageAbove 50Vac or 75Vdc
Motor TypeDC Motor
Controller dimensions diagram
Image: Diagram showing the physical dimensions of the controller: 215mm length, 83mm width, and 40mm height.

Application Scenarios

Examples of vehicles compatible with the controller
Image: Visual examples of compatible vehicles including small electric vehicles (350-800W), ordinary electric vehicles (450-800W), electric bicycles (500-1200W), and electric tricycles (500-1200W).

Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download:

Download User Manual (PDF)

For further assistance, please contact the seller or manufacturer directly.

User Tips

No specific user tips from reviews or Q&A were provided for this product at this time. Always ensure correct voltage matching and secure wiring for optimal performance and safety.

© 2024 diymore. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.