1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new Hustly 12.3-inch Digital Instrument Cluster for Jeep Wrangler JK models manufactured between 2011 and 2017. This advanced digital dashboard replaces your vehicle's original instrument panel, offering enhanced functionality and a modern display.
The digital cluster runs on a Linux operating system, ensuring a smooth and responsive user experience with a startup time of less than 2 seconds. It retains and displays almost all original vehicle functions, including mileage, RPM, speed, fuel level, water temperature, tire pressure, and various warning indicators.

The 12.3-inch Digital Instrument Cluster installed in a Jeep Wrangler JK.
2. Package Contents
Before beginning installation, please verify that all components are present in your package:
- 12.3-inch Digital Instrument Cluster
- Power Cord Adapter
- USB Cable
- User Manual (this document)

The digital cluster and its accompanying accessories.
3. Installation Guide
The Hustly Digital Instrument Cluster is designed for non-destructive, plug-and-play installation. No extensive cable modifications are required.
3.1 Compatibility Check
This product is compatible with Jeep Wrangler JK models from 2011 to 2017.

Applicable Models & Years: Jeep Wrangler JK 2011 - 2017.
3.2 Steering Wheel Control Note
IMPORTANT: Your vehicle's steering wheel buttons are crucial for direct installation and full functionality.
- If your car's steering wheel has 6 buttons, you can install the digital dashboard directly.
- If your car's steering wheel has only 2 buttons, you will need to purchase a separate 6-button steering wheel control module to ensure compatibility and full control of the product. Please contact us for assistance if this is the case.

Steering wheel control compatibility: 6-button steering wheels are directly compatible.
3.3 Installation Steps (General Overview)
While the installation is plug-and-play, professional installation is recommended. A general overview of the process is provided below. For detailed visual instructions, please refer to the installation video.
- Carefully remove the existing instrument cluster from your Jeep Wrangler JK.
- Disconnect the wiring harnesses from the original cluster.
- Connect the provided Power Cord Adapter and USB Cable to the new digital instrument cluster.
- Connect the new digital cluster's wiring harnesses to the vehicle's corresponding ports.
- Mount the new digital instrument cluster securely in place.
- Test all functions before fully reassembling the dashboard.
Installation and operation demonstration video. The video shows steps like removing the vent and navigating through settings.

Comparison of the dashboard before and after installing the digital cluster.
4. Operating Instructions
The digital instrument cluster offers a highly customizable and informative display. Use your steering wheel controls to navigate through the various modes and settings.
4.1 Display Modes and Styles
The cluster features:
- 5 Terrain Modes: Highway, Rock, Snow, Mud, Desert. These modes adjust the display to provide relevant information for different driving conditions.
- 4 Dial Styles: Gold, Silver, White, Black. Customize the aesthetic of your dashboard to match your preference.

The digital cluster displaying various driving modes.

Overview of function introduction and complete setup options.

Available dashboard styles: Gold, Black, White, Silver.

Six terrain modes for optimized driving information.
4.2 Settings Menu
Access the 'Settings' menu using your steering wheel controls to customize various aspects of the display and vehicle information:
- Dash Settings: Adjust 'Dash style' (Gold, Black, etc.), 'Brightness of day', and 'Brightness of night'.
- Car Information: View details such as 'Doors' (e.g., 2 doors, 4 doors), 'Car type' (e.g., Sahara), 'Engine' (e.g., Gasoline), 'Transmission case' (e.g., Automatic, Manual), and 'Tire size' (e.g., 32 inch, 40 inch).
- Car Settings: Configure vehicle-specific options like 'Door unlocking mode', 'Key unlocking mode', 'Turn light flashing', 'Headlight delayed turn-off', 'Shutdown delay time' (Now, 45s, 5min), and 'Hill start assist'.
- Unit Settings: Change measurement units for 'TPMS' (psi, bar), 'Distance' (mi, km), 'Volume' (Gallon, Liter), 'Temperature' (°F, °C), and 'Speed' (MPH, KM/H).
- Alert Settings: Manage alarms for 'Safety belt', 'Tire pressure', 'Safety airbag', and 'Door open'.
- Maintenance: Track maintenance intervals for 'Engine oil & filter', 'Transmission oil & filter', 'Brake oil', 'Air conditioning filter', and 'Spark plug'.
- Time & Date: Adjust the current time and date.
- Device & Debug: Advanced settings for diagnostics and system information.
4.3 Original Car Information Display
The digital cluster provides real-time monitoring of essential vehicle data:
- Tire Pressure: Displays individual tire pressure readings.
- Tire Angle: Shows the current steering angle.
- Engine Parameters: Coolant temperature, oil temperature, transmission temperature, battery voltage, oil pressure, and transfer case status.
- Fuel Information: Gas tank level and fuel consumption data.
- Driving Safety: Seat belt reminder, door open reminder, and various warning lights.

Real-time monitoring of individual tire pressure and tire angle after installation.
5. Maintenance
The digital instrument cluster includes a dedicated 'Maintenance' section to help you keep track of your vehicle's service needs. This section allows you to monitor and reset intervals for:
- Engine oil & filter
- Transmission oil & filter
- Brake oil
- Air conditioning filter
- Spark plug
Regularly checking these parameters and performing maintenance as recommended by your vehicle manufacturer will ensure optimal performance and longevity of your Jeep Wrangler JK.
6. Troubleshooting
If you encounter any issues with your digital instrument cluster, please refer to the following common troubleshooting steps:
- Display Not Turning On: Ensure all power connections are secure. Check the vehicle's fuse box for any blown fuses related to the instrument panel.
- Incorrect Readings: Verify that all wiring harnesses are correctly connected. If unit settings (e.g., KM/H vs MPH) are incorrect, adjust them in the 'Unit Settings' menu.
- Steering Wheel Controls Not Working: Confirm that your steering wheel has 6 buttons. If it has 2 buttons, a separate control module is required for full functionality. Ensure the module (if applicable) is correctly installed.
- System Lag or Freezing: While the Linux system is designed for speed, prolonged use or extreme conditions might rarely cause minor issues. Try restarting the vehicle. If the problem persists, check for any available software updates (contact support for guidance).
- Warning Lights Malfunctioning: Ensure all vehicle sensors are functioning correctly. The digital cluster reflects the data from your car's ECU. If a warning light persists after checking the cluster's settings, consult a professional mechanic for vehicle diagnostics.
For persistent issues or problems not covered here, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | Jeep Wrangler Digital Instrument Cluster |
| Brand Name | Hustly |
| Compatible Models | Jeep Wrangler JK (2011-2017) |
| Screen Size | 12.3 inches |
| Resolution | 1920*720 |
| Operating System | Linux System |
| Screen Type | Blue light anti-glare screen |
| Operating Temperature | -40 °C to 98 °C |
| Special Features | 12.3 inch LCD digital display, 5 terrain modes, 4 dial styles |
| Placement on Vehicle | Instrument Panel |
| Item Weight | 2 kg |
| Package Dimensions (L x W x H) | 41 cm x 22 cm x 18 cm |
| Origin | Mainland China |
| High-concerned chemical | None |

Detailed product information and specifications.
8. User Tips
- Enjoy the Digital Speedometer: Many users find the digital speedometer to be a significant upgrade, offering precise and easy-to-read speed information.
- Customize Your Display: Experiment with the 5 terrain modes and 4 dial styles to find the display that best suits your driving conditions and personal preference.
- Steering Wheel Controls are Key: Familiarize yourself with the steering wheel controls as they are essential for navigating the cluster's menus and settings. Ensure you have a 6-button steering wheel or the necessary module for full functionality.
- Easy Installation: The plug-and-play design makes installation straightforward, but if you're unsure, professional installation is always recommended.
9. Warranty and Support
Your Hustly Digital Instrument Cluster comes with the following support:
- 30-Day Quality Guarantee: Products with quality issues within 30 days of receipt can be returned for a refund or exchange, provided they are in resalable condition.
- 1-Year Free Warranty: If you encounter product problems within one year after receiving the product, we will provide free warranty service and cover the cost of parts replacement.
For any warranty claims, technical support, or product-related inquiries, please contact our customer service team. It is recommended to reach out to us first to resolve any after-sales issues efficiently.
For additional guidance, you may refer to the comprehensive user manual available in PDF format: View User Manual (PDF)