Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your CYCLAMI S11 Bicycle Saddle Lamp Mount. This bracket is designed to securely attach compatible bicycle taillights, such as Garmin Radar series (RT510, RTL515, RVR315) and other models (L308, L508, TL30), to the underside of your bicycle saddle.
Package Contents
Please check the package for the following items:
- 1 x Tail Light Bracket
- 1 x Hexagonal Wrench
- 4 x Zip Ties

Setup and Installation
Follow these steps to properly install the saddle lamp mount on your bicycle:
1. Attaching the Bracket to the Saddle
- Position the bracket under your bicycle saddle, ensuring it aligns with the saddle rails.
- Thread the provided zip ties through the designated holes in the bracket and around the saddle rails.
- Tighten the zip ties securely at both ends to firmly attach the bracket to the saddle. Ensure the bracket is stable and does not shake.
- Trim any excess length from the zip ties for a clean finish.

2. Adjusting Orientation (Horizontal/Vertical)
The mount allows for both horizontal and vertical positioning of your taillight:
- If you wish to change the orientation of the taillight (e.g., from horizontal to vertical), use the hexagonal wrench to loosen the two screws on the mount plate.
- Rotate the mount plate 90 degrees to the desired position.
- Retighten the two screws firmly to secure the mount plate in its new orientation.

3. Attaching the Taillight
Once the bracket is securely installed and oriented, attach your compatible taillight by twisting it into the mount until it clicks into place.
Installation Video Guide
Operating Instructions
To attach your taillight, align it with the mount and twist until it locks securely. To remove, twist in the opposite direction and pull the taillight away from the mount.
Maintenance
- Cleaning: Wipe the bracket with a damp cloth to remove dirt and grime. Avoid using harsh chemicals that may damage the material.
- Inspection: Periodically check the tightness of the zip ties and the mount screws to ensure the bracket remains secure.
- Storage: If removing the bracket for storage, keep it in a cool, dry place away from direct sunlight.
Troubleshooting
- Bracket is loose: Ensure the zip ties are pulled as tight as possible. If necessary, replace old zip ties with new ones.
- Taillight does not attach securely: Check for any obstructions in the mount or on the taillight's attachment mechanism. Ensure the mount plate screws are tightened.
- Difficulty rotating mount plate: Loosen the two screws sufficiently before attempting to rotate the plate. Do not force it.
Specifications
| Feature | Detail |
|---|---|
| Product Name | Radar Tail Light Bracket |
| Model | S11 |
| Color | Black |
| Material | Nylon with fiber |
| Weight | Approx. 11.6g |
| Dimensions (Bracket Body) | Length: 5.8 cm (2.28 in) Width: 3.4 cm (1.34 in) Height (base): 1.2 cm (0.47 in) |
| Dimensions (Overall) | Width: 60 mm (2.36 in) Height: 51 mm (2.01 in) Thickness: 14 mm (0.55 in) |
| Mount Diameter | Ø34 mm (1.34 in) |

User Tips
- For optimal visibility, ensure your taillight is clean and unobstructed by saddle bags or clothing.
- Regularly check the bracket's position and tightness, especially after riding on rough terrain.
- When installing, make sure the bracket is centered under the saddle for balanced weight distribution and aesthetics.
Warranty and Support
For warranty information or technical support, please refer to the seller's policies or contact CYCLAMI customer service directly. Keep your purchase receipt as proof of purchase.
A user manual in PDF format may be available for download from the manufacturer's website or the product listing page (View PDF Manual).