1. Important Safety Information
Warning: Before using this battery, please read all safety information carefully. Improper handling may result in fire, explosion, or chemical burns.
1.1 Battery Tampering
- Never disassemble, modify, or puncture the battery.
- Never crush, bend, or apply pressure to the battery.
- Never attempt to repair or open the battery casing.
- Avoid disassembly unless you are a professional, as it can be dangerous.
1.2 Fire and Heat Hazards
- Never expose battery to open flame or fire.
- Never heat battery in microwave, oven, or other heating devices.
- Never leave battery in direct sunlight or hot vehicles.
- Avoid using or charging the phone in high-temperature environments.
1.3 Electrical Safety
- Never short-circuit positive and negative terminals.
- Never allow metal objects to contact both terminals simultaneously.
- Never use damaged, swollen, or leaking batteries.
1.4 Child Safety
- Keep batteries away from children and pets.
- If battery is swallowed, seek immediate medical attention.
- Do not allow battery electrolyte to contact skin or eyes.
1.5 General Precautions
- Avoid impacts or dropping the phone.
- If you notice the battery swelling, stop using the phone immediately.
2. Package Contents
Please check the package for the following items:
- 1 x BP4M Replacement Battery for Xiaomi Mi Pad 6 Pro
- 1 x Set of Basic Repair Tools (includes screwdrivers, prying tools, suction cup, and opening picks)

3. Specifications
| Feature | Specification |
|---|---|
| Model Number | BP4M |
| Battery Type | Li-ion Polymer (1ICP3/84/117) |
| Compatible Brand | Xiaomi |
| Rated Capacity | 4200mAh / 16.2Wh |
| Typical Capacity | 4300mAh / 16.6Wh |
| Nominal Voltage | 3.87VDC |
| Charging Voltage Limit | 4.45VDC |
| Quality Certification | CE, RoHS |
| Origin | Mainland China |
| Standard | GB31241-2014 |

4. Installation Instructions
This section outlines the general steps for battery replacement. Professional installation is recommended. Refer to the official user manual PDF for detailed diagrams and specific device disassembly instructions: User Manual (PDF)
Step 1: Preparation
- Power off your device completely.
- Remove any case or cover.
- Inspect the new battery for any damage or swelling before installation.
- Gather necessary tools (included in package or professional tools).
Step 2: Positioning
- Carefully open your device according to specific model instructions.
- Remove the old battery.
- Align the new battery connectors with the device ports.
- Ensure correct polarity (match + and - markers if visible).
- Gently press the battery into its designated place.
Step 3: Connection
- Connect the battery connector firmly to the device's motherboard.
- Verify a secure connection (no loose wires).
- Carefully close the device casing, ensuring all clips and screws are properly secured.
5. Initial Setup
- Power on your device after installation.
- Allow the battery to reach a full 100% charge before its first use.
- Modern lithium-ion polymer batteries do not require an initial full charge-discharge cycle for