Road Top RoadTop Linux Touch Screen for Audi A4

Contents

RoadTop 8.9" / 12.3" Linux Touch Screen Multimedia Display User Manual

For Audi A4 2009-2012

1. Introduction

Thank you for choosing the RoadTop Linux Touch Screen Multimedia Display. This system integrates advanced features like Wireless/Wired CarPlay, Android Auto, AirPlay, and AutoLink into your Audi A4 (2009-2012) vehicle, enhancing your driving experience with a high-resolution 1920x720 display.

2. Safety Information

  • Ensure the vehicle's ignition is fully turned off before beginning installation. Operating or installing the unit with power on may cause permanent damage to the car audio system.
  • For users without relevant installation experience, professional assistance is recommended. Improper installation can lead to damage to the unit or vehicle.
  • Do not attempt to disassemble or modify the unit. This may cause damage and void the warranty.
  • Keep the unit away from water and moisture.

3. Product Content

The package includes the following items:

  • 8.9 Inch or 12.3 Inch Multimedia Smart Touchscreen (x1)
  • Screen Bracket (x1) (Note: The bracket varies depending on the car model)
  • Power Cable (x1)
  • USB Cable (x1)
  • AMI Cable (x1)
  • Iron Frame and Screws (x1)
  • Airbag Light Adapter Cable (x1)
Product Size and Accessories List

Figure 3.1: Product Size and Accessories List

4. Compatibility

This multimedia display is compatible with Audi A4 models from 2009 to 2012. Please verify your car's system configuration before installation.

4.1 Compatible Car Models and Systems

MODELSYSTEMYEAR
A4CAR HAVE GPS MMI 3G2009-2012
A4CAR NO GPS2009-2012
Compatible Cars

Figure 4.1: Compatible Car Systems

4.2 How to Check Your Car System

To ensure compatibility, please check your car's multimedia system:

  1. Press the "Settings" or "Menu" button on your radio.
  2. Go to "Settings".
  3. Scroll down and find similar FM interfaces as shown in the figures below.

Compatible Systems: Symphony, Concert, Multimedia (High configuration)

Not Compatible Systems: Chorus, CD Changer

How to know which item fit my car

Figure 4.2: Identifying Compatible and Incompatible Systems

Before purchase, please make sure car system firstly

Figure 4.3: Checking Car System Configuration (No GPS vs. GPS MMI 3G)

5. Installation Instructions

Ensure the vehicle's ignition is fully turned off before beginning installation. For detailed visual guidance, please refer to the official user manual PDF available at User Manual (PDF).

5.1 Cable Connection Chart

Refer to the diagram for an overview of all cable connections.

Cable Connection Chart

Figure 5.1: Cable Connection Overview

5.2 Head Unit Power Cable Connection

Disconnect the original power cable from the head unit and attach it to the new wiring harness. Then, connect the new harness to the head unit's power port.

5.3 LVDS Cable Connection

Disconnect the original LVDS cable from the OEM screen and connect it to the new Linux-compatible screen. No other cables from behind the OEM screen are required; please leave them disconnected.

5.4 Gateway Control Module Cable Connection

The gateway control module is located on the passenger side. With the glove box removed, it can be easily accessed. Connect the provided gateway control module cable as per the diagram.

5.5 Airbag Light Adapter Cable Connection

Connect the included airbag light adapter cable. Pay attention to the correct connection method to avoid the airbag light coming on. Connect the original car emergency light cable, the emergency light board (removable) of the original car, and the Linux screen's shell emergency light socket.

5.6 MIC Cable Connection

Connect the microphone cable from the back of the Linux screen to the microphone port on the new bracket.

5.7 Clamps Removal Guide

Disassemble the clamps from the OEM bracket and transfer them to the new bracket. Replace the OEM bracket with the new one and secure it to the vehicle.

5.8 Iron Frame and Linux Screen Installation

Remove the OEM screen and fix the new iron frame with OEM screws. Then, fix the Linux screen with new screws.

5.9 AMI Cable Connection (For Equipped Vehicles)

For vehicles equipped with an AMI port: Connect the provided AMI cable to enable CarPlay audio through the vehicle's AMI/AUX system. AMI ports can typically be found in the glove box, central console box, or behind media interface doors.

6. Basic Setup

After installation, complete the following basic settings for proper functionality.

6.1 OEM System Resolution Setup

If the OEM interface shows screen distortion or icon misalignment, adjust the resolution:

  1. Navigate to: Setup > Car Settings > Original Car's Screen Resolution.
  2. Select the appropriate resolution from the options: MMI 2G 400x240, MMI 2G 480x240, MMI 3G 400x240, MMI 3G 400x240 (2), MMI 3G 800x480.

Tip: If your original car's screen is 5.8 inches, choose MMI 3G 400x240 or MMI 3G 400x240 (2). If your original car's screen is 7 inches, choose MMI 3G 800x480.

6.2 Sound Setup

This unit supports two audio output modes: AMI/AUX Mode and Original Bluetooth Mode (for vehicles with factory Bluetooth audio).

6.2.1 AUX Audio Output Mode

  1. Disconnect any existing Bluetooth connection between your phone and the vehicle.
  2. In the Setup > System menu, set the "Use Car's BT Channel" function to OFF.
  3. Switch to OEM MMI3G System: Navigate to Media.
  4. Select "External audio input" to set the sound input to AUX.
  5. Once "External audio source is active" is shown, return to the Linux interface.

6.2.2 AMI Audio Output Mode (for vehicles with AMI function)

  1. Connect the AMI cable to your vehicle's AMI port (refer to section 5.9).
  2. Disconnect any existing Bluetooth connection between your phone and the vehicle.
  3. In the Setup > System menu, set the "Use Car's BT Channel" function to OFF.
  4. Switch to OEM MMI3G System: Navigate to Media.
  5. Select "External audio input" to set the sound input to AMI.
  6. Return to the Linux interface.

6.2.3 Original Bluetooth Mode (for vehicles with factory Bluetooth audio)

Note: This mode supports CarPlay and Android Auto only. It does not support audio from USB play, AirPlay, or Autolink.

  1. In the Setup > System menu, set the "Use Car's BT Channel" function to ON.
  2. Switch to OEM MMI3G System: Navigate to Media.
  3. Pair your phone with the Car's original Bluetooth.
  4. After pairing, leave the OEM MMI3G system on the Bluetooth audio screen. Then, return to the Linux interface.

6.3 Reverse Camera Setup

Note: The OEM 360° surround view is exclusively available through the OEM system and is not supported by the new system. Compatibility with aftermarket 360° cameras is also not available.

6.3.1 OEM Camera

For automatic transmission vehicles with an original factory (OEM) camera:

  • Select "Original Camera" in the Setup > Car Settings > Reversing Settings menu.

For manual transmission vehicles with an original factory (OEM) camera:

  • Required (Not Included): Prepare a long electric wire to connect the vehicle's reversing light to the "BACK" wire on the unit's power harness.
  • Navigate to Setup > Car Settings > Reversing Settings.
  • Set Camera Type to "Original Camera".
  • Set the "Reverse Line Detection" function to ON.

6.3.2 Aftermarket Camera

For automatic transmission vehicles with an aftermarket camera:

  • In Setup > Car Settings > Reversing Settings, select "Aftermarket Camera".
  • Connect the camera by following the provided wiring diagram.

For manual transmission vehicles with an aftermarket camera:

  • Required (Not Included): Prepare a long electric wire to connect the vehicle's reversing light to the power extension cable of the aftermarket camera.
  • Navigate to Setup > Car Settings > Reversing Settings.
  • Set Camera Type to "Aftermarket Camera".
  • Set the "Reverse Line Detection" function to ON.

Specification Note: Maximum supported resolution is AHD720P. 1080P is not compatible.

Rear Camera Function

Figure 6.1: Rear Camera Functionality

7. Operating Instructions

7.1 CarPlay / Android Auto

Before using CarPlay/Android Auto:

  1. Disconnect any existing Bluetooth connection between your phone and the vehicle.
  2. Navigate to Setup > Smart Phone > Smart Phone List and set the corresponding CarPlay and Android Auto function to ON.

7.1.1 Wired CarPlay / Android Auto Connection Steps

  1. Connect your phone to this device via a high-quality data cable.
  2. Confirm the authorization request on your phone.

7.1.2 Wireless CarPlay / Android Auto Connection Steps

  1. Turn on your phone's WiFi.
  2. Turn on your phone's Bluetooth.
  3. Search for and pair with the device Bluetooth named "CAR-XXXX".
  4. Allow the CarPlay / Android Auto sync to your phone.
  5. Click "Connect" to use CarPlay / Android Auto function.
Wireless/Wired CarPlay

Figure 7.1: Wireless/Wired CarPlay Interface

Siri & Google Voice Control

Figure 7.2: Siri & Google Voice Control

Before using AirPlay/AutoLink, navigate to Setup > Smart Phone > Smart Phone List and set the corresponding function to ON.

7.2.1 AirPlay Connection Steps (for iOS phones)

  1. Use your iPhone to search for the device WiFi name "CAR-XXXX" and connect to it.
  2. If a password is required, enter "66668888".
  3. Select "AirPlay" in Screen Mirroring from your iPhone.
  1. If your Android phone does not have AutoLink, scan the QR code in the official PDF manual to download the "Autolink Pro" APP.
  2. Open the "Autolink Pro" app from your phone.
  3. Search for the WiFi "CAR-XXXX" and connect to it.
  4. Allow "Autolink Pro" to use mirror link function.
AirPlay / Autolink

Figure 7.3: AirPlay / AutoLink Functionality

7.3 Brightness Adjustment

The unit features an automatic light-sensitive brightness adjustment function for optimal visibility day and night.

Brightness Adjustment

Figure 7.4: Automatic Brightness Adjustment

7.4 Hands-Free Phone Call

Make calls, return missed calls, and listen to voice mail directly from the display.

7.5 Navigation & Maps

The system supports all kinds of mainstream navigation apps, allowing you to travel more efficiently.

7.6 Mobile Music Play

You can download different music apps (e.g., Spotify, YouTube Music, Tidal, Amazon Music) and link them to the homescreen menu for playback.

7.7 Original Menu / CarPlay Menu Switch

The original car system and CarPlay menu can be switched freely by pressing one button.

8. Maintenance

To ensure the longevity and optimal performance of your multimedia display, follow these maintenance guidelines:

  • Cleaning the Screen: Use a soft, lint-free cloth slightly dampened with water or a screen cleaner specifically designed for electronic displays. Do not use abrasive cleaners, solvents, or alcohol-based solutions, as these can damage the screen coating.
  • General Cleaning: Keep the unit free from dust and debris. Use a soft brush or compressed air to clean around buttons and crevices.
  • Avoid Extreme Temperatures: Do not expose the unit to extreme heat or cold for prolonged periods, as this can affect its electronic components.
  • Protect from Liquids: Prevent any liquids from spilling onto the unit. In case of accidental spills, immediately power off the unit and wipe it dry.

9. Troubleshooting (FAQ)

9.1 OEM System Screen Not Displayed Normally

Solution: Please set the correct resolution in Setup > Settings > Car Settings > Original Screen Resolution. If the issue continues, refer to the official PDF manual for detailed troubleshooting steps.

9.2 Car Has No Sound

Solution: Make sure you have properly configured either Bluetooth Audio or AMI/AUX. Only one mode can be active at a time. Using both may cause no sound. Refer to the official PDF manual for step-by-step guidance.

9.3 Reverse Camera Isn't Functioning

Solution: First, identify if it's an OEM or aftermarket camera and if your vehicle is automatic or manual transmission. Then, go to section 6.3 "Reverse Camera Setup" in this manual and follow the corresponding setup steps.

9.4 Echo During Calls

Solution: Go to Setup > Audio > Call Echo Cancellation and select "Start Auto AEC" to perform echo cancellation. For optimal call quality, ensure the vehicle interior remains quiet.

9.5 CarPlay / Android Auto Connection Keeps Dropping

Solution: Try changing to a new WiFi channel in Setup > WiFi > Channel.

9.6 Steering Wheel Controls Compatibility

Answer: The steering wheel supports volume adjustment, track skip, phone call answering, and voice control keys. It is compatible only with vehicles equipped with a multi-function steering wheel.

9.7 Does the Product Work with the Original Car Microphone?

Answer: Yes, the original car microphone is supported via original Bluetooth Audio mode.

10. Specifications

FeatureSpecification
Warranty12 months
ChipsetSunplus 8368XU with 2Gb DDR3
Processor TypeSunplus 8368XU
Touch ScreenYes (Capacitive)
Built-in ScreenYes
Din SizeOne Din
Operating SystemLinux
Voltage12 V
Item Weight2kg
Item Size39.5*18.4*17.3 cm
Output TypeColored
Special FeaturesBuilt-In Speaker/Microphone, Voice Control, CarPlay, Android Auto, Reversing Input, Support steering wheel control
Digital Media FormatCD
OSD LanguageMulti-language support including English, German, French, Spanish, Italian, etc.
Resolution1920*720
Display Size8.9'' or 12.3''
Brand NameRoad Top
OriginMainland China
For Vehicle Brands/ModelAudi
Audi ModelA4
A4-Year2009, 2010, 2011, 2012
CertificationCE
MaterialPlastic + Metal
Rearview Camera SupportAHD720P

11. Warranty and Support

11.1 Warranty

This product comes with a 12-month warranty from the date of purchase, covering manufacturing defects.

11.2 Support

For technical support, troubleshooting, or any inquiries, please contact us via your purchase platform, email, or WhatsApp. To expedite assistance, please include the following information:

  • Order ID
  • Vehicle model and year
  • Detailed issue description (providing a video or photos is highly recommended)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.