I. Warning & Safety Information
- Do not use in humid environments.
- Avoid areas with strong electromagnetic interference.
- Disconnect power before installation.
- When inserting or removing hardware, take care not to damage motherboard pins.
II. Product Overview
The JINGSHA X99 PLUS Motherboard Set Kit provides a robust foundation for high-performance computing, featuring an LGA2011-3 socket for Intel Xeon E5 V3/V4 CPUs and DDR4 memory support. This kit is designed for users seeking a cost-effective solution for gaming, office, design, server, scientific computing, and video rendering applications.
III. Setup Instructions
- Install the CPU: Carefully place the Intel Xeon E5 V3/V4 CPU into the LGA2011-3 motherboard socket, ensuring correct alignment.
- Insert Memory Modules: Insert the DDR4 memory modules into the designated slots (4*DDR4 slots, dual channel architecture) and press down firmly until the retention clips secure them.
- Connect Power Cables: Connect the 24-pin main power connector and the CPU fan connector(s) to the motherboard.
- Connect Storage Devices: Attach your SATA and M.2 (NVMe/NGFF) storage devices to the appropriate ports.
- Connect Peripherals: Connect your keyboard, mouse, monitor, and other peripherals to the back I/O ports.
- Power On: Connect the power supply to an electrical outlet and power on the computer.
IV. Operating Instructions
After successful installation, power on your system. The motherboard will initiate the POST (Power-On Self-Test) process. You may need to access the BIOS/UEFI settings to configure boot order, enable specific features, or adjust system parameters. Refer to the BIOS/UEFI section of the detailed manual for specific instructions.
Install your preferred operating system and necessary drivers for all components, especially chipset, LAN, and USB drivers, to ensure full functionality and optimal performance.
V. Maintenance
- Keep Clean: Regularly clean dust from the motherboard and components using compressed air to prevent overheating.
- Check Connections: Periodically ensure all cables and components are securely seated.
- BIOS Updates: Check the manufacturer's website for the latest BIOS/UEFI updates to improve stability and compatibility.
- Temperature Monitoring: Use monitoring software to keep an eye on CPU and chipset temperatures to ensure proper cooling.
VI. Troubleshooting
- System fails to power on:
- Verify that all power connections (24-pin ATX, 8-pin CPU) are secure. Confirm proper installation of the CPU and memory modules.
- Blue Screen of Death (BSOD):
- This can indicate driver issues, hardware incompatibility, or a faulty component. Update the motherboard BIOS to the latest version. Verify that all hardware components (RAM, GPU, storage) are compatible with the motherboard and properly installed.
- Hard drive not detected:
- Confirm correct SATA cable connections to both the drive and the motherboard. Check power connections to the drive. Ensure the drive is enabled in the BIOS/UEFI settings. For M.2 drives, ensure they are properly seated and that the M.2 slot is enabled in BIOS, and not conflicting with SATA ports if applicable.
- No TPM 2.0 support:
- This motherboard does not natively support TPM 2.0. This may affect compatibility with certain operating systems like Windows 11, which has TPM 2.0 as a system requirement. Workarounds may exist but are not officially supported.
VII. Specifications
| Feature | Specification |
|---|---|
| Brand Name | jingsha |
| Socket Type | LGA 2011-3 (V3/V4) |
| Processor Compatibility | Intel Xeon E Series |
| Chipset Manufacturer | Intel |
| Chipset | Intel Others |
| Form Factor | Micro-ATX (17cm x 17cm) |
| Number Of Memory Slots | 4 |
| Support Memory Type | DDR4 REG |
| Memory Channel | Double |
| Maximum RAM Capacity | 128 GB |
| Number of M.2 | 2 (NVMe, NGFF, supports 2280) |
| Number of SATA Ports | 4 |
| Storage Interface Type | SATA, M.2 (NVMe) |
| Number of PCIe x 16 | 1 (PCI-E 3.0) |
| Number of PCI | 2 |
| Onboard LAN | 1x RJ45 (Gigabit Ethernet RTL8111H) |
| Back I/O Ports | PS/2, 2*USB3.0, 2*USB2.0, 1x RJ45, 3-in-1 Audio |
| Support USB Type | USB 2.0, USB 3.0 |
| Onboard Connectors & Header | 24-pin Main Power Connector, CPU Fan Connector(s), AAFP Connector, 2* F_USB3.0 |
| RAID Supported | No |
| With CPU | Yes (Intel Xeon E5 1650 V4) |
| Usage Scenario | Gaming, Office, Design, Server, Scientific Computing, Video Rendering, MaxCompute, others |
VIII. User Tips
- Initial Inspection: Upon receiving the product, carefully inspect all components for any physical damage before installation.
- Secure Connections: Always double-check that all power cables, data cables, and components (CPU, RAM, GPU) are firmly and correctly seated to prevent boot issues.
- Driver Installation: After installing the operating system, ensure you install the latest drivers for the chipset, LAN, and any other integrated components from the manufacturer's website for optimal performance and stability.
- Windows 11 Compatibility: Be aware that this motherboard does not natively support TPM 2.0, which is a requirement for Windows 11. Users may need to explore workarounds if planning to install Windows 11.
IX. Additional Resources
For a more comprehensive guide and detailed diagrams, please refer to the official user manual in PDF format. You can typically find this document on the product's support page or by searching for the model number on the manufacturer's website. A PDF version of the item guide is available for download: User Manual (PDF).
X. Warranty & Support
For information regarding warranty coverage, technical support, or service inquiries, please contact the seller or refer to the product packaging for specific details. Keep your proof of purchase for any warranty claims.