Skydance TE-12A-H, TE-12A-L, TF-30A, TF-40A

Contents

Skydance Constant Current Dimmable LED Triac Dimming Driver User Manual

Models: TE-12A-H, TE-12A-L, TF-30A, TF-40A

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Skydance Constant Current Dimmable LED Triac Dimming Driver. These drivers are designed for various LED lighting applications, offering reliable dimming capabilities and protection features. Please read this manual thoroughly before installation and use.

For additional documentation, including a PDF version of the user manual, please refer to the official product page or contact customer support.

2. Product Features

  • Dimming Interface: Triac/ELV, AC Push-Dim
  • Compatibility: Designed for leading edge/trailing edge Triac dimmers and dimming systems.
  • Dimming Technology: PWM digital dimming ensures no alteration to LED color rendering index.
  • Output: 1 channel constant current output, with configurable current via DIP switch.
  • Protection: Features over-heat, over-voltage, over-load, and short circuit protection with automatic recovery.
  • Enclosure: Full protective plastic case.
  • Application: Suitable for indoor LED lighting applications, including downlights, spotlights, and decorative lighting. Ideal for office, commercial, domestic, hotels, classrooms, warehouses, healthcare, retail, and display environments. Also suitable for retrofit upgrades and new luminaire designs.
  • Warranty: 5-year, 50,000-hour warranty.

3. Models and Specifications

The Skydance Triac Dimmable LED Drivers are available in several models, each with specific output characteristics. Refer to the tables below for detailed specifications.

3.1. TE-12A-H and TE-12A-L Series

Diagram showing features and mechanical structures for TE-12A-H and TE-12A-L LED drivers.
Figure 1: Features and Mechanical Structures for TE-12A-H and TE-12A-L
Technical parameters table for TE-12A-H and TE-12A-L LED drivers.
Figure 2: Technical Parameters for TE-12A-H and TE-12A-L

3.2. TF-30A and TF-40A Series

Diagram showing features and mechanical structures for TF-30A and TF-40A LED drivers.
Figure 3: Features and Mechanical Structures for TF-30A and TF-40A
Technical parameters table for TF-30A and TF-40A LED drivers.
Figure 4: Technical Parameters for TF-30A and TF-40A

4. Setup and Installation

Ensure power is disconnected before performing any installation or wiring. Installation should be performed by a qualified electrician in accordance with local electrical codes.

4.1. Mechanical Structures and Dimensions

The drivers feature a compact plastic case suitable for various installations. Refer to the diagrams in Section 3 for specific dimensions.

4.2. LED Current Selection (DIP Switch)

The output current for each driver model can be configured using the DIP switches located on the unit. Ensure the power is OFF before adjusting DIP switches.

TE-12A-H / TE-12A-L Current Selection

DIP switch settings for LED current selection on TE-12A-H and TE-12A-L models.
Figure 5: LED Current Selection for TE-12A-H and TE-12A-L

TF-30A / TF-40A Current Selection

DIP switch settings for LED current selection on TF-30A and TF-40A models.
Figure 6: LED Current Selection for TF-30A and TF-40A

Note: Please select the current through the DIP switch on the board with power off.

4.3. Wiring Diagrams

Follow the appropriate wiring diagram for your installation type. Ensure all connections are secure and correctly polarized.

TE-12A-H / TE-12A-L Wiring

Wiring diagram for TE-12A-H and TE-12A-L with a Triac dimmer (no neutral wire).
Figure 7: Wiring with Triac Dimmer (No Neutral Wire)
Wiring diagram for TE-12A-H and TE-12A-L with a Triac dimmer (with neutral wire).
Figure 8: Wiring with Triac Dimmer (With Neutral Wire)

TF-30A / TF-40A Wiring

Wiring diagram for TF-30A and TF-40A, including connections for Triac dimmer and AC push switch.
Figure 9: Wiring for TF-30A and TF-40A (Triac Dimmer & AC Push Switch)

5. Operating Instructions

5.1. Triac Dimming Input

The driver is compatible with various Triac dimmers (e.g., Lutron, Clipsal, Dynalite). Note that different dimmers may have varying minimum dimming levels. To achieve dimming down to 1%, ensure your dimmer supports this minimum level.

5.2. Dimming Curve

Dimming curve graph showing PWM duty cycle versus brightness percentage.
Figure 10: Dimming Curve

The dimming curve illustrates the relationship between the PWM duty cycle and the perceived brightness. This ensures smooth and consistent dimming performance.

6. Maintenance

  • Cleaning: Keep the driver clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners or solvents.
  • Inspection: Periodically check wiring connections for tightness and signs of wear or damage.
  • Environment: Ensure the operating environment adheres to the specified temperature and humidity ranges (Working Temperature: -20°C~50°C, Working Humidity: 20%~90%RH non-condensing).
  • Ventilation: Ensure adequate ventilation around the driver to prevent overheating.

7. Troubleshooting

  • No Light Output:
    • Check input power supply.
    • Verify all wiring connections are correct and secure.
    • Ensure the LED current selection DIP switches are set correctly for your LEDs.
    • Check for short circuits or open circuits in the LED load.
  • Flickering or Unstable Dimming:
    • Ensure the dimmer is compatible with Triac dimmable LED drivers.
    • Check if the dimmer's minimum dimming level is compatible with the driver's capabilities.
    • Verify stable input voltage.
  • Driver Overheating:
    • Ensure adequate ventilation.
    • Verify the load does not exceed the driver's maximum output power.
    • Check for ambient temperature exceeding specified limits.
  • Automatic Shutdown: The driver has built-in protection mechanisms (over-heat, over-voltage, over-load, short circuit). If it shuts down, identify and resolve the fault condition. The driver should recover automatically once the fault is cleared.

8. User Tips

  • DIP Switch Settings: When setting the output current via DIP switches, always ensure the power is completely off. If the printed manual's color coding for switches is unclear, consult online resources or the PDF manual for confirmation.
  • Smooth Dimming: For optimal dimming performance, especially with button-mode operation, ensure your dimmer is compatible and correctly configured. Some users report excellent results with smooth dimming transitions.
  • Installation: While the product is generally well-regarded, proper installation is key. If you're unsure about wiring, seek professional assistance.

9. Warranty and Support

Skydance LED drivers come with a 5-year warranty, ensuring long-term reliability and performance. For technical support, warranty claims, or further inquiries, please contact your retailer or the manufacturer directly.

You can also refer to the comprehensive user manual available in PDF format: Skydance LED Driver User Manual (PDF).

10. Frequently Asked Questions (FAQ)

Q: Can I use this driver with any LED light?
A: This driver is designed for constant current LEDs. Ensure your LED lights match the output current and voltage range of the selected driver model.
Q: What kind of dimmer is compatible?
A: The driver is compatible with Triac/ELV (leading edge/trailing edge) dimmers and supports AC Push-Dim functionality.
Q: How do I change the output current?
A: The output current is selected using DIP switches on the driver. Always disconnect power before making any adjustments to the DIP switches.
Q: What if the lights flicker during dimming?
A: Flickering can be caused by incompatible dimmers or incorrect wiring. Ensure your dimmer is suitable for Triac LED drivers and check all connections. Also, verify the dimmer supports the desired minimum dimming level.

11. Manufacturing Process Overview

The following video provides a brief look into the manufacturing and testing processes for Skydance products, highlighting the quality control measures in place.

Video 1: Skydance Factory Production Process

12. AC Triac Dimming Series Overview

Skydance offers a comprehensive AC Triac control system, including Triac dimmers, dimmable LED drivers, and DMX512 Triac Converters. These products are compatible with various leading brands of Triac control systems.

Diagram illustrating the Skydance AC Triac Dimming Series, showing various control options like remote, Wi-Fi & RF Triac Dimmer, Triac panel controller, and Push switch, connected to Triac Drivers and different types of LED lights (downlight, bulb, spotlight, panel light, LED strip) in various settings (office, living room, gym, TV room, reading room).
Figure 11: Skydance AC Triac Dimming Series Overview

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.