M5Stack ATOMS3 Lite C124

Contents

M5Stack ATOMS3 Lite ESP32-S3FN8 Development Kit User Manual

Model: C124

1. Introduction and Overview

The AtomS3-Lite is a programmable controller from the M5Stack Atom series development kit lineup. It features the ESP32-S3 as its main controller and measures a compact $24.0 \times 24.0 \times 9.5mm$. This device utilizes the ESP32-S3FN8 solution, which includes 8MB SPI flash, integrated Wi-Fi, a built-in 3D antenna, and a 5V to 3.3V power circuit. The AtomS3-Lite is equipped with an IR transmitter LED, an RGB status indicator, a programmable button, and a HY2.0-4P interface. For easy expansion, power pins and six GPIO female headers are routed out at the bottom. The onboard USB Type-C port facilitates program download and serial communication. An M2 screw hole on the back provides convenient mounting options, making this module ideal for various embedded smart device applications.

Official product overview and demonstration of the M5Stack ATOMS3 Lite.

2. What's in the Box

  • 1 x M5Stack ATOMS3 Lite Development Kit

3. Setup

3.1. Physical Overview

M5Stack ATOMS3 Lite physical overview with labels

The ATOMS3 Lite features an IR-LED (G4), RGB LED (G35), Button (G41), Reset button, USB-C port, HY2.0-4P connector, and M2-screw hole. It also has external pins at 2.54mm pitch.

3.2. Connecting the Device

Connect your M5Stack ATOMS3 Lite to your computer using a standard USB Type-C cable. Ensure the connection is secure.

3.3. Flashing Firmware

To flash new firmware onto your ATOMS3 Lite:

  1. Press and hold the Reset button on the device.
  2. Continue holding the Reset button for approximately 2 seconds until the internal green LED lights up.
  3. Release the Reset button.

The device is now in download mode and ready for firmware flashing.

4. Operating

4.1. Programming with Arduino IDE

The ATOMS3 Lite can be programmed using the Arduino Integrated Development Environment (IDE). This platform allows you to write, compile, and upload code to control the device's functionalities. Refer to official M5Stack documentation for detailed setup instructions for the Arduino IDE.

4.2. Programming with UIFlow2

UIFlow2 is a graphical programming platform that provides an intuitive block-based interface for controlling M5Stack devices, including the ATOMS3 Lite. This method is ideal for users who prefer a visual programming approach. Refer to official M5Stack documentation for detailed setup and usage instructions for UIFlow2.

4.3. Application Scenarios

M5Stack ATOMS3 Lite application scenarios

The ATOMS3 Lite can be used as an IoT Node, a compact microcontroller, and for various embedded smart device applications due to its compact size.

5. Maintenance

To ensure the longevity and optimal performance of your M5Stack ATOMS3 Lite, keep the device clean and dry. Avoid exposure to extreme temperatures, high humidity, or corrosive substances. Do not attempt to disassemble the device beyond what is necessary for standard use or expansion with compatible modules.

6. Troubleshooting

  • Device Not Powering On: Ensure the USB Type-C cable is securely connected to both the ATOMS3 Lite and a reliable power source (e.g., computer USB port, USB power adapter).
  • Firmware Flashing Issues: Verify that the device is correctly put into download mode as described in Section 3.3. Check your USB cable and ensure necessary drivers are installed on your computer.
  • Connectivity Problems (Wi-Fi/Bluetooth): Ensure your code correctly initializes and configures the Wi-Fi or Bluetooth modules. Check for any interference from other wireless devices.
  • General Malfunctions: Try resetting the device by briefly pressing the Reset button. If issues persist, consult the official M5Stack documentation, community forums, or support resources.

7. Specifications

SpecificationParameter
SoCESP32-S3FN8
Flash8MB
RGBWS2812C-2020
DC-DCSY8089
Operating Temp$0 \sim 40^{\circ}C$
Power Voltage5V
Power MethodType-C
Output Voltage3.3V
IO Interface x6G5/G6/G7/G8/G38/G39
Product Size$24.0 \times 24.0 \times 9.5mm$
Product Weight5.3g
Package Size$85.0 \times 65.0 \times 12.2mm$
Gross Weight11.0g

7.1. Pinout Diagram

M5Stack ATOMS3 Lite pinout diagram

The pinout diagram shows the available GPIOs, power pins, and special function pins. Key pins include TCH5-TCH8 (G5-G8), CLK_OUT3 (G39), G38, G35 (RGB), G4 (IR), G41 (Button), and the HY2.0-4P connector pins (GND, 5V, G2, G1).

7.2. Schematics

Detailed schematics for the AtomS3-Lite are available in the official PDF user manual. You can access the PDF at: M5Stack ATOMS3 Lite User Manual (PDF).

8. User Tips

  • The ATOMS3 Lite can be effectively used as a tiny WiFi reshare router, making it a great emergency backup tool.
  • It integrates well and works perfectly with Home Assistant for smart home automation projects.

9. Warranty and Support

For detailed warranty information, technical support, and additional resources, please visit the official M5Stack website or contact your authorized retailer. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.