M5Stack C008-C

Contents

M5Stack ATOM Echo ESP32 Smart Speaker Development Kit User Manual

Model: C008-C

1. Product Overview

The Atom-Echo is a programmable smart speaker based on the ATOM design. Extremely compact at just 24 x 24 x 17 mm, it can stream music by connecting—via the ESP32's wireless functions—to a phone, tablet, etc., or play designated streaming media over Wi-Fi. To simplify voice usage, Atom-Echo integrates an STT (speech-to-text) service. Flash the dedicated firmware to enable it and issue voice commands to perform diverse operations. You can also write your own code to connect to cloud platforms such as AWS or Google; using the built-in microphone and speaker, Atom-Echo can provide AI capabilities for voice control, smart interaction, IoT, and more. An on-board RGB LED (SK6812) clearly indicates connection status. In addition to serving as a smart speaker, it retains the control abilities of the ATOM series—you can connect external devices through the GROVE port. An M2 screw hole on the back facilitates mounting.

Key Features:

  • Compact and lightweight
  • Built-in Speech-to-Text (STT) service
  • ESP32-based, supporting A2DP and BLE 4.0
  • Wi-Fi protocol IEEE 802.11 b/g/n
  • Integrated microphone and speaker
  • RGB LED status indication
  • GROVE expansion connector
  • Audio recording and playback
  • Independent programmable button
  • Development platforms: Arduino, ESP-IDF/ADF

Product Demonstration:

Video: A demonstration of the M5Stack ATOM Echo's voice interactive capabilities and music playback.

2. Setup

2.1 Component Identification

Familiarize yourself with the various components of your ATOM Echo device:

M5Stack ATOM Echo detailed component diagram

Image: Detailed view of the ATOM Echo with labeled components including Button (G39), RGB-LED, Ext. Pin, IR-LED, PH2.0-4P, USB-C, I2S.Pin, and M2-SCREW HOLE. Also shows specifications for SPK, MIC, and I2S-AMP.

2.2 Pin Usage Precautions

The following pins have been predefined and should not be reused to avoid potential damage to the ATOM-Echo: G19, G22, G23, G33.

2.3 Driver Installation

Connect the device to a PC and install the FTDI driver via Device Manager. For Windows 10, download the driver that matches your OS, unzip it, and install it through Device Manager. On some systems, you may need to install the driver twice. Unrecognized devices typically appear as 'M5Stack' or 'USB Serial'. Windows users are recommended to install via Device Manager (custom update); the executable installer may not work properly.

Screenshot of Windows Device Manager showing driver installation process

Image: Screenshot illustrating the Windows Device Manager interface for driver installation.

For macOS users, before installation, navigate to System Preferences > Security & Privacy > General and ensure 'Allow apps downloaded from App Store and identified developers' is selected.

A user manual in PDF format is available for more detailed instructions: View User Manual (PDF).

2.4 Software and Firmware

The ATOM Echo supports various development platforms and firmware options:

  • Arduino:
    • Atom-Echo Arduino Quick Start
    • Atom-Echo Record & Play Example
    • Atom-Echo Play Music Example
    • Atom-Echo EchoSTT Example
  • ESP-IDF:
    • Factory Bluetooth Speaker Firmware
  • USB Driver:
    • Driver Installation

For wireless speaker functionality, the Easyloader tool can be used to flash firmware. The LED is red when powered on and turns green after connecting to a wireless device, indicating readiness for audio output. Factory firmware source code and BIN files are provided for advanced users to build custom functions.

3. Operation

3.1 Basic Functionality

The ATOM Echo can function as a Bluetooth speaker, an IoT node, or for voice control applications. It connects to devices like phones or tablets via ESP32's wireless capabilities or streams media over Wi-Fi.

Application scenarios for M5Stack ATOM Echo

Image: Application scenarios for the ATOM Echo, including use as a BT Speaker, IoT Node, and for Voice Control.

3.2 Voice Interaction

Utilize the integrated Speech-to-Text (STT) service for voice commands and AI capabilities. The programmable button can be configured for various interactions.

3.3 Audio Recording and Playback

The device supports both audio recording and playback through its integrated microphone and speaker.

3.4 RGB LED Status Indication

The on-board RGB LED (SK6812) provides clear visual feedback on the device's connection status and operational state.

3.5 GROVE Expansion

The GROVE port allows for connection of external devices, expanding the functionality of the ATOM Echo.

3.6 Playback Precautions

To prevent damage to the ATOM-Echo, avoid the following operations:

  • Outputting a DC signal through the I2S channel
  • Playing white noise for long periods
  • Playing full-scale square-wave audio

4. Maintenance

To ensure the longevity and optimal performance of your M5Stack ATOM Echo, keep the device clean and dry. Avoid exposure to extreme temperatures or humidity. Gently wipe the exterior with a soft, dry cloth if needed. Do not use harsh chemicals or abrasive cleaners.

5. Troubleshooting

  • Device Not Recognized by PC: If the device appears as 'M5Stack' or 'USB Serial' in Device Manager, ensure the FTDI drivers are correctly installed. On some systems, a second installation may be required.
  • No Audio Output / Speaker Issues: Verify that the device is properly connected to your audio source (phone, tablet, etc.). Note that due to its compact size, the speaker's volume may be limited and the microphone sensitivity may not match larger devices.
  • LED Status: The RGB LED indicates device status. A red LED typically means the device is powered on but not connected, while a green LED indicates a successful wireless connection.
  • Firmware Issues: Ensure the correct and stable firmware is flashed to the device. Refer to the official M5Stack documentation and tutorials for flashing procedures.
  • Voice Command Unresponsive: Check network connectivity if using cloud-based voice services. Ensure the microphone is not obstructed.

6. Specifications

The following table details the technical specifications of the M5Stack ATOM Echo:

SpecificationParameter
SoCESP32-PICO-D4, 240 MHz, Dual Core, Wi-Fi
Flash4 MB
Interface1 x IR-TX, 1 x Button, 1 x Reset Button
PinOutG21/G25/5V/GND, 3V3/G22/G19/G23/G33
RGB LEDSK6812
Speaker0.8 W / NS4168 (I2S)
MicrophoneSPM1423 (PDM)
EnclosurePlastic (PC)
Product Weight5 g
Gross Weight10 g
Product Size24 x 24 x 17 mm
Package Size85 x 65 x 17 mm

Physical Dimensions:

M5Stack ATOM Echo dimensions diagram

Image: Diagram showing the dimensions of the ATOM Echo: 24mm/0.94in (width), 24mm/0.94in (depth), and 17mm/0.66in (height).

M5Stack ATOM Echo size comparison with a quarter dollar coin

Image: The ATOM Echo shown next to a US Quarter Dollar coin for a visual size comparison.

Weight:

M5Stack ATOM Echo on a digital scale showing 5g net weight

Image: The ATOM Echo placed on a digital scale, indicating a net weight of 5g.

PinMap:

M5Stack ATOM Echo PinMap diagram

Image: PinMap diagram for the ATOM Echo, detailing connections for SPK & MIC, HMI (RGB LED, Button), and HY2.0-4P.

Schematics:

M5Stack ATOM Echo schematics diagram

Image: Electrical schematics for the ATOM Echo.

7. User Tips

  • Home Assistant Integration: Many users find the ATOM Echo to be an excellent, cost-effective solution for local voice control with Home Assistant. The flashing process is generally straightforward, and the device integrates well with wake word detection.
  • Speaker and Microphone Performance: Due to its compact size, the speaker volume may be on the quieter side, and microphone sensitivity might not match larger, dedicated smart home devices. This is an expected characteristic and generally sufficient for personal use or in quiet environments.
  • Power Supply: The device typically only requires a USB-C power supply to operate.
  • Firmware Pre-installation: Some units may come with firmware pre-installed, such as ESPHome voice assist, simplifying initial setup.

8. Frequently Asked Questions (FAQ)

  • Q: Does the ATOM Echo include a battery?
    A: No, the ATOM Echo does not include a battery. It is powered via USB-C.
  • Q: What development environments are supported?
    A: The ATOM Echo supports Arduino, ESP-IDF, and ADF development platforms.
  • Q: Can I use it for phone calls?
    A: While it supports A2DP (Advanced Audio Distribution Profile) for audio streaming, phone calls are generally not supported.
  • Q: How do I know if the device is connected?
    A: The on-board RGB LED (SK6812) indicates connection status. It typically turns green when successfully connected to a wireless device.

9. Warranty & Support

For detailed warranty information, technical support, or further assistance, please refer to the official M5Stack website or contact your seller directly. You may also find additional resources and community support through the M5Stack forums and documentation.

A comprehensive user manual in PDF format is available for download: M5Stack ATOM Echo User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.