1. Introduction
The Gamwing AB01 is a versatile mobile game controller designed to enhance your gaming experience across multiple platforms. It features both Type-C wired and Bluetooth wireless dual-mode connectivity, ensuring broad compatibility and low latency. With advanced Hall effect joysticks and triggers, programmable back keys, and a comfortable ergonomic design, the AB01 provides precise control and extended play comfort.
2. Product Layout and Components
Familiarize yourself with the controller's layout and key components:
Key Buttons and Functions:
- Left Joystick (L3): Directional control, press for L3 button.
- D-Pad: Directional input (Up, Down, Left, Right).
- M Button: Function button for settings and macros.
- View Button: System/Menu button.
- LT/LB Buttons: Left Trigger and Left Bumper.
- Right Joystick (R3): Directional control, press for R3 button.
- A/B/X/Y Buttons: Action buttons.
- Menu Button: System/Menu button.
- RT/RB Buttons: Right Trigger and Right Bumper.
- H Button: Home/Power button.
- Type-C Port: For wired connection and charging.
- 3.5mm Audio Jack: For headphones.
- R4/L4 Buttons: Programmable back keys.
3. Setup and Connection
3.1 Installing Your Phone
- Pull the controller's left side to extend the grip.
- Align your phone's Type-C port with the controller's Type-C connector and insert it.
- Gently push the controller's left side back to firmly secure your phone.
3.2 Connection Modes
The controller supports various connection modes depending on your device and desired functionality. The indicator light will be solid once a successful connection is established.
| Connection Type | Mode | Button Combination | Indicator Light | Recommended Game Type | Bluetooth Name |
|---|---|---|---|---|---|
| Type-C Wired | iOS Mode | H+A | Purple | iOS Mapped Games | Aobing Max Set |
| Type-C Wired | Android HID Mode | H+X | Blue | Android HID Games | Aobing Max Set |
| Type-C Wired | Android Current Mode | H+Y | Green | Android Mapped Games | Aobing Max Set |
| Bluetooth Wireless | Android Standard Mode | H+A | Purple | Android Mapped Games | Aobing Max Set |
| Bluetooth Wireless | Switch Mode | H+Y | White | Switch Games | Pro Controller |
Note: For some Android phones, you may need to enable OTG (On-The-Go) functionality in your phone's settings for the controller to power on and function correctly.
4. Operating Instructions
4.1 Calibration of Joysticks and Triggers
If you experience issues with joystick or trigger response, perform a calibration:
- Ensure the controller is connected to your phone.
- Hold the View + Menu + H combination buttons for 5 seconds until the indicator lights blink white rapidly to enter calibration mode.
- Ensure the triggers and joysticks are in their natural, untouched position.
- Rotate both joysticks to their maximum travel 3 times, then let them return to their initial position naturally.
- Press both triggers to their maximum travel 3 times, then let them return to their initial position naturally.
- Press the A Button to complete and exit calibration mode.
Note: Calibration should be performed gently and at a constant speed to avoid errors. If joysticks and triggers are functioning normally, calibration is not necessary.
4.2 Back Buttons Settings (L4/R4)
The L4 and R4 back buttons are programmable:
- Hold the M + L4/R4 combination buttons for 2 seconds until the indicator lights blink white slowly.
- Press the button you wish to map to L4 or R4.
- Press the M button to save the setting. The indicator lights will return to their initial state.
Note: If no action is taken for 30 seconds during setting, the controller will automatically exit setting mode without saving changes.
4.3 Turbo/Auto Function
The Turbo/Auto function allows for rapid or automatic button presses:
- To set Turbo/Auto for a button (A/B/X/Y/LB/RB/LT/RT): Press M + (desired button).
- Press once to enable Turbo.
- Press a second time to enable Auto.
- Press a third time to clear the Turbo/Auto function for that button.
- Double-click the M button to clear all Turbo/Auto functions for all buttons simultaneously.
4.4 Hair Trigger Mode
Hair Trigger mode reduces the travel distance required to activate the triggers, ideal for FPS games:
- Hold the H + LT + RT buttons for 2 seconds to enable/disable Hair Trigger mode.
- When enabled, the indicator lights will blink for 2 seconds when the LT/RT button is pressed.
4.5 Interchangeable Buttons
- D-pad and Left Stick Interchange: Hold the M + D-pad Up buttons for 5 seconds to swap the functions of the D-pad and the left joystick.
- A-B and X-Y Interchange: Hold the M + A buttons for 5 seconds to swap the functions of the A-B and X-Y buttons.
These settings will be saved even after restarting the controller.
4.6 Standby and Wake-up
- The controller enters standby mode after 10 minutes of inactivity.
- To manually enter standby mode, hold the H button for 10 seconds while the controller is on.
- To wake up the controller from standby, press any of the H/A/B/X/Y buttons.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the controller. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Cooling Holes: The controller features heat dissipation holes. Ensure these are not obstructed to maintain optimal performance and prevent overheating.
- Charging: Use the provided Type-C cable for charging. Avoid using damaged cables or non-compliant chargers.
6. Troubleshooting
- Controller not powering on/connecting (Android): Ensure your Android phone has OTG (On-The-Go) functionality enabled in its settings.
- Drifting joysticks/inaccurate triggers: Perform the joystick and trigger calibration procedure as described in Section 4.1.
- Buttons not responding: Check the connection mode (wired/Bluetooth) and ensure it matches your device's requirements. If using Bluetooth, ensure the controller is paired correctly.
- Macro/Turbo functions not working: Double-check the programming steps in Section 4.2 and 4.3. Ensure you are pressing the correct button combinations.
- Controller enters standby unexpectedly: Ensure there is no prolonged inactivity. If the issue persists, try resetting to factory settings (Hold M + H buttons for 5 seconds).
7. Specifications
| Feature | Description |
|---|---|
| Model | Aobing Max / AB01 |
| Connection Method | Type-C Wired & Bluetooth Wireless Dual-Mode |
| Supported Systems | Android, iOS, PC, Switch, PS (streaming), XBOX (streaming), Steam (streaming) |
| Joysticks | Dual Hall Effect Joysticks (High-precision, Long-life, No Dead Zone, No Drift) |
| Triggers | Dual Mode Hall Effect Triggers (Linear for racing, Hair for FPS/action) |
| Special Functions | Turbo & Auto Combo, Macro Recording Programmable Back Keys (L4/R4) |
| Audio Interface | 3.5mm Audio Jack |
| Charging | Supports playing while charging via Type-C |
| Phone Compatibility | Stretching size: 115-193mm (4.5-7.5 inches), compatible with multiple cameras |
| Ergonomics | Anti-slip large grip, cooling hole design |
| Interchangeable Controls | D-pad and Left Stick, A-B and X-Y buttons |
| Product Dimensions | 219.3mm (Length) x 108.3mm (Height) x 60.4mm (Depth) |
| Package Weight | 0.312 kg |
8. User Tips
- For optimal performance, ensure your phone's operating system is up to date.
- When using the Type-C wired connection, ensure your phone's Type-C port is clean and free of debris for a secure connection.
- Experiment with the interchangeable D-pad/left stick and A-B/X-Y button functions to find the most comfortable setup for your gaming style.
- Utilize the programmable back keys (L4/R4) for frequently used in-game actions to gain a competitive edge.
9. Warranty and Support
For warranty information, technical support, or any inquiries regarding your Gamwing AB01 Mobile Game Controller, please contact the seller or refer to the official product page. Keep your purchase receipt as proof of purchase.
A digital version of the user manual is available for download: Gamwing AB01 User Manual (PDF)