1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your CARABC Wireless CarPlay & Android Auto Module. This module integrates Apple CarPlay and Android Auto functionalities into your Mercedes-Benz vehicle's existing NTG4.5 or NTG4.7 infotainment system, allowing for seamless access to navigation, music, communication, and other smartphone features directly on your car's display.
Please read this manual thoroughly before installation and use to ensure proper function and to avoid damage to the product or your vehicle.
2. Safety Information
- CAUTION: Never turn on the ignition with the factory radio removed.
- CAUTION: Ensure the CarPlay POWER is disconnected when adjusting the dip switches. Only connect CarPlay POWER after the dip switches are correctly set.
- Installation should ideally be performed by a professional to prevent damage to the vehicle's electrical system or the module.
- Do not attempt to disassemble or modify the module. This will void the warranty and may cause damage.
3. Package Contents
Please check the box for the following items:
- CARABC Wireless CarPlay & Android Auto Module
- Power Cable
- CAN Gateway Cable
- Wi-Fi Antenna
- LVDS Cable
- AMI Cable (if applicable, may be free)
- Installation Tools (plastic pry tools)

4. Compatibility
This module is compatible with Mercedes-Benz vehicles equipped with NTG4.5 or NTG4.7 systems. Please verify your car model and system version before installation.
4.1. Compatible Car Models (NTG4.5/4.7 Systems)
| Model | Class | Years | Display Screen Size |
|---|---|---|---|
| W117 | CLA | 2013-2014 | 5.8 inches |
| W166 | ML/GL | 2013-2014 | |
| W172 | SLK | 2013-2014 | |
| W176 | NEW A CLASS | 2013-2015 | |
| W242 | B CLASS | 2012-2014 | |
| X204 | GLK | 2013-2014 | |
| W204 | C CLASS | 2012-2014 | 7 inches |
| W207 | E COUPE | 2012-2014 | |
| W212 | E CLASS | 2012-2015 | |
| W218 | CLS CLASS | 2012-2015 | |
| W231 | SL CLASS | 2012-2015 | |
| W246 | NEW B CLASS | 2015 |

4.2. Confirming Your System Model (NTG4.5 vs NTG4.7)
You can confirm your car's system model by checking the radio display:
- NTG 4.5 SYSTEM: The radio display will typically show a frequency range like 500-1700kHz with a specific layout.
- NTG 4.7 SYSTEM: The radio display will typically show a frequency range like 85-110MHz with a different layout.
The 'ON' button on your car's radio can be used to confirm the model which can use the system (NTG4.5 and NTG 4.7).
5. Product Functions
The CARABC module enhances your driving experience with the following features:
- Wireless & Wired CarPlay: Access iPhone apps like Navigation (Apple Maps, Google Maps, Waze), Music (Apple Music, Spotify), Phone calls, Messages, and Siri voice control.
- Wireless & Wired Android Auto: Access Android phone apps like Navigation (Google Maps, Waze), Music (Spotify, YouTube Music), Phone calls, Messages, and Google Assistant voice control.
- Reversing Video Input: Supports aftermarket rear-view cameras, displaying the feed directly on your car's screen when reversing.
- Front View Camera Input: Supports aftermarket front-view cameras.
- 360 Panoramic Camera Input: Compatible with 360-degree panoramic camera systems.
- Multimedia Playback: Play audio and video files via USB.
- Original Car System Integration: Retains all original car functions and controls. Seamless switching between the original system and the CarPlay/Android Auto interface.

6. Specifications
| Parameter | Value |
|---|---|
| Operating Voltage | 9-16V |
| Operating Temperature | -30 ~ +75°C |
| Stored Temperature | -30 ~ +85°C |
| Environment Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption | 500mA (rated), 3A (Max) |
| Shutdown Current | 3 mA (Clock is on) |
| Quiescent Current | Less than 3 mA |
| Charging Current (USB) | ≤2A (Host activates circuit protection below 1.5A if USB charging current > 1A) |
7. Setup and Installation
Installation involves connecting the module to your car's head unit and wiring harness. It requires careful handling of vehicle components. If you are not confident in performing the installation yourself, please seek professional assistance.
7.1. Dip Switch Settings
The dip switches on the module must be set correctly according to your car model and screen size. Ensure CarPlay POWER is disconnected before adjusting.
| Dip Switch | Car Model (2013-2015 years) | |
|---|---|---|
| 1 | 2 | W117, W166, W172, W176, W204, W207, W212, W218, W231, W242, W246, X204 |
| OFF | OFF | (All listed models) |
| Dip Switch | Screen Size | |
|---|---|---|
| 3 | 4 | Resolution |
| OFF | OFF | 5.8" (400*240) |
| OFF | ON | 7" (800*480) |
7.2. Connection Diagram and Wiring

Follow the diagram carefully for all connections:
- Power Connections:
- Yellow: B+ (Battery Positive)
- Red: ACC (Accessory Power)
- Black: GND (Ground)
- Blue: Camera power supply
- Video/Audio Connections:
- LVDS: Connect to the original vehicle LVDS and the original-car's host terminal.
- REAR-CVBS: Connect to rearview camera or 360-degree panoramic AHD output.
- FRONT-CVBS: Connect to the front-view camera.
- AUX: Audio output.
- USB: Connect mobile phone, USB flash drive, or for software upgrades.
- Special Connections:
- Brown: Reserve detect. Connect to the rearview light cable or 360 panoramic detection cable.
- White: 360-TX -> Connected to 360 panoramic universal box TXD.
- White and Black: 360-RX -> Connected to 360 panoramic universal box RXD.
- Wi-Fi Antenna: Ensure it is not attached to metal surfaces for optimal signal.
7.3. Control Instructions
The module integrates with your vehicle's existing controls:
7.3.1. Steering Wheel Buttons
- Long press: Switch systems.
- Short press: Connect / Hang up the phone (without using original car Bluetooth) / Activate voice.
- Short press: Increase or decrease volume.
- Long press: Restart systems.
7.3.2. Central Control Knob
- Long press: Cut the system.
- Knob movement: Move the cursor.
- Short press: Confirm selection.
- Move left/right: Cut to the next song.
- Long press (left/right): Confirm active voice.
- Move left for 3s: Activate HICAR mouse.
- Move right: Up and down for HICAR mouse.
- Move right about 15s: Can reduce it.
7.4. Important Installation Notes
- When inserting cables to the host, ensure they are stuck properly.
- Ensure the optical fiber from the original car is moved to the correct place.
- Before using the retrofit system, connect your phone via Bluetooth and select calls and media. Ensure the original car audio is selected in the Bluetooth source interface.
For a comprehensive installation guide with detailed diagrams and step-by-step instructions, please refer to the official User Manual PDF: View User Manual PDF.
8. Operating Instructions
8.1. Wireless CarPlay Connection
- On your iPhone, open Wi-Fi and Bluetooth.
- On the car screen, navigate to the CarPlay interface and select