TELESIN P1-MP-10

Contents

TELESIN Magnetic Phone Camera Shoot Hand Grip User Manual

Model: P1-MP-10

TELESIN Magnetic Phone Camera Shoot Hand Grip attached to a smartphone, showing different angles and the remote control.

The TELESIN Magnetic Phone Camera Shoot Hand Grip, designed to enhance mobile photography.

Important Notes and Safety Information

Thank you for purchasing a TELESIN product. Please read this manual carefully before using the product to ensure proper operation and to prevent damage or injury.

General Safety Precautions

  • Always read this manual thoroughly before first use.
  • Keep this manual for future reference. If other users operate this product, provide them with this manual.
  • Pay attention to all warnings and follow all instructions in this user manual.
  • Do not disassemble or damage the product. If the product is deformed or gets wet, stop using it immediately.
  • Keep this product out of reach of children and pets.

Button Battery Warnings (CR1632)

INGESTION HAZARD: This product contains a button cell or coin battery. DEATH or serious injury can occur if ingested.

  • A swallowed button cell or coin battery can cause internal chemical burns in as little as 2 hours.
  • Keep new and used batteries OUT OF REACH of CHILDREN.
  • Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
  • For safety reasons, dispose of used batteries properly and do not discard or burn them carelessly.
  • Button batteries can be easily swallowed by children. Store them in a location out of reach of children to prevent serious consequences such as accidental ingestion, insertion into the nose or ears.
  • The button battery included in this product is not rechargeable.
  • Do not force discharge, recharge, disassemble, heat above 60°C (140°F) or incinerate. Doing so may result in injury due to venting, leakage, or explosion resulting in chemical burns.
  • Ensure the batteries are installed correctly according to polarity (+ and -).
  • Do not mix old and new batteries, different brands, or types of batteries (e.g., alkaline, carbon-zinc, or rechargeable).
  • If the device has not been used for a long time, remove the battery and recycle or dispose of it immediately.
  • If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

Product Introduction

Familiarize yourself with the components of your TELESIN Magnetic Phone Camera Shoot Hand Grip:

Diagram showing the parts of the TELESIN Magnetic Phone Camera Shoot Hand Grip: Mode Button 1, Mode Button 2, Zoom Lever, Indicator Light, Shutter Button, and 1/4 Inch Thread Hole.

Overview of the grip's buttons and features.

  • Mode Button 1 & 2: Used for switching shooting modes and adjusting exposure.
  • Zoom Lever: Slides to zoom in or out during photo and video capture.
  • Indicator Light: Shows device status (power, pairing, low battery).
  • Shutter Button: Multi-functional button for power, photo/video capture, focus, and camera switching.
  • 1/4 Inch Thread Hole: For mounting on tripods or other accessories.

Setup

What's in the Box

Contents of the TELESIN Magnetic Phone Camera Shoot Hand Grip package, including the grip, magnetic ring, cleaning kit, phone lanyard, battery removal tool, and instruction manual.

All items included in your product package.

  • 1 x Camera Grip
  • 1 x Magnetic Ring
  • 1 x Cleaning Kit
  • 1 x Phone Lanyard
  • 1 x Battery Removal Tool
  • 1 x Instruction Manual

Initial Battery Setup

For first-time use, please remove the plastic battery tab from the battery compartment.

Diagram showing how to remove the plastic battery tab from the grip's battery compartment.

Remove the battery tab before first use.

Attaching the Grip to Your Phone

Attach the product to the back of your phone using its magnetic connection.

Diagram showing the magnetic attachment of the grip to the back of a smartphone.

Securely attach the grip to your phone's back.

The grip is suitable for use with iPhone 12 and above. For optimal magnetic hold, it is recommended to use a MagSafe-compatible phone case.

Diagram illustrating the strong magnetic force of the grip, showing it can hold phones weighing 190-230g with 2KG force, and phones with magnetic cases/rings (220-250g) with 3KG force.

The grip provides strong magnetic suction power.

For Non-MagSafe Phones or Cases:

If your phone is not a MagSafe model or you use a non-MagSafe case, you can choose one of the following options:

  1. Use a strong magnetic phone case: (Not included in the set, please purchase separately).
  2. Use the included magnetic ring: Choose a smooth and flat phone case, attach the metal ring to it, press gently, and then wait for 12 hours before use.

Important Notes for Magnetic Ring:

  • Do not attach the metal ring directly to the back of a bare phone.
  • Do not reapply the magnetic ring to prevent a reduction in adhesiveness.
  • Oily materials in phone cases (e.g., liquid silicone or patterned cases) can affect adhesion and are not recommended.
Diagram showing setup for MagSafe phones/cases and non-MagSafe phones/cases, illustrating the use of a magnetic ring for non-MagSafe devices.

Setup instructions for both MagSafe and non-MagSafe phones.

Bluetooth Pairing

  1. Power on the grip by holding the Shutter button for 2 seconds.
  2. On your smartphone, go to Bluetooth settings and connect to

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.