CARABC Wireless Carplay Android Auto Interface

Contents

CARABC Wireless Carplay & Android Auto Interface Instruction Manual

For Porsche PCM3.1 Systems (2010-2016)

1. Product Features Introduction

The CARABC Wireless Carplay & Android Auto Interface is designed to integrate advanced smartphone functionalities into your Porsche PCM3.1 system. This module supports both wired and wireless Carplay and Android Auto, along with screen mirroring capabilities.

Key Features:

  • Smartphone Integration: Supports Apple Carplay, Carlife, and Android Auto (wired & wireless).
  • Screen Mirroring: Compatible with both iOS and Android devices.
  • High Performance: Powered by a Sunplus SPHE8368-U 800MHz chip, running on a stable LINUX system with 128MB DDRIII SDRAM and 128MB SLC NAND FLASH.
  • Multimedia Playback: Supports 1080P multi-format video (including H.264) and lossless audio playback via USB.
  • Camera Support: Extends support for original car's rear-view camera, aftermarket rear-view cameras (CVBS/AHD), front-view cameras, and DVR.
  • Audio Control: Independent audio EQ adjustment, music & navigation volume control, and support for original car MIC with echo control.
  • Connectivity: Features USB-HOST for device connection, UART connector for touch screen and button operation, and Bluetooth call function.
CARABC Wireless Carplay Android Auto Interface installed in a Porsche PCM3.1 dashboard, showing phone mirroring and the main board.

Image: Overview of the CARABC Wireless Carplay & Android Auto Interface, demonstrating its integration into a Porsche PCM3.1 system and its core components.

Four-panel image showing CarPlay, Android Auto, AirPlay, and Autolink interfaces on the car screen.

Image: Demonstrates the various smartphone integration modes: Apple CarPlay, Android Auto, AirPlay, and Autolink, as displayed on the car's infotainment screen.

Six-panel image showing various functions: Navigation, Siri Control, Screen Mirroring, Phone Call, Online Music Play, USB Flash Play.

Image: Illustrates key functions such as Navigation, Siri Control, Screen Mirroring, Phone Calls, Online Music Playback, and USB Flash Drive Playback.

2. Product Accessories List

The following components are included with your CARABC Wireless Carplay & Android Auto Interface:

Product Information image showing the main board dimensions (120x107mm) and a list of included accessories with images (Power cable, RCA/USB cable, Data cable, BT&WIFI Antenna, Microphone cable, FPC).

Image: Detailed view of the main board dimensions (120x107mm) and all included accessories: Power cable, RCA/USB cable, Data cable, BT&WIFI Antenna, Microphone cable, and FPC.

  • Main Board: The core processing unit (120x107mm).
  • Power Cable: For connecting the interface to the vehicle's power supply.
  • RCA/USB Cable: For audio/video input and USB connectivity.
  • Data Cable: For data transmission within the system.
  • BT & WIFI Antenna: For wireless Bluetooth and Wi-Fi connectivity.
  • Microphone Cable: For external microphone connection.
  • FPC (Flexible Printed Circuit) Cables: For connecting the LCD module and main PCBA.

3. Specifications

FeatureSpecification
ChipSPHE8368-U
Main Frequency800MHz
RAM/ROM128MB/256MB
Operating SystemLinux Gemini
Supported Audio FormatsMP3, WMA, AAC, FLAC, WAV
Supported Video FormatsAVI, MKV, MP4, FLV, MPEG, H.264
Dimensions60mm × 39mm × 6mm
Working Environment Temperature-40°C ~ +85°C
Storage Environment Temperature-40°C ~ +100°C
Storage Temperature Humidity30% ~ 90%
Working Humidity45% ~ 80%
Working HeightUp to 15000 feet (4573 meters)
Rating Voltage5V DC (±0.3V)
Standby Current≤1mA
Video OutputCVBS/RGB888/LVDS
Video Output Voltage1.0Vpp/75Ω
Audio OutputTwo-channel CD stereophonic sound, extendable
Audio WattTwo channel 0.25W/CHANNEL
Voice InputMIC analog signal
Communication Serial Port1 group UART port
Touch InterfaceIIC/serial communication
USB Port1 group
Bluetooth StandardBluetooth V2.1+EDR
Bluetooth Frequency Band2402MHz-2480MHz
WIFI Frequency Band2.4GHz & 5.8GHz

Compatibility:

Compatible Model List (PCM3.1, 2010-2016, for Cayenne, Macan, Cayman, Panamera, Boxster, 911, 991, 718) and a comparison of NAVI (compatible) vs. CD-AUX (not compatible) hosts.

Image: Compatibility chart for Porsche PCM3.1 systems (2010-2016 models) including Cayenne, Macan, Cayman, Panamera, Boxster, 911, 991, and 718. Also shows the difference between compatible NAVI host and incompatible CD-AUX host.

System: PCM3.1
Years: 2010-2016
Applicable To: Cayenne, Macan, Cayman, Panamera, Boxster, 911, 991, 718

Important: Applicable to PCM3.1 host. Not applicable to CDR host.

4. Product Installation (Setup)

Careful installation is crucial for proper functionality. Refer to the diagrams below for detailed wiring and component connections.

4.1 General Wiring Diagram

Detailed wiring diagram for product installation, showing connections to OEM head unit, FPC, cameras, power, and audio.

Image: General wiring diagram illustrating connections to the OEM head unit, FPC, various camera inputs (rear, front), power (B+/BATT+ OUT, CAN 12V), ground (GND), and microphone (MIC).

4.2 FPC and Main PCBA Connection

The Flexible Printed Circuit (FPC) cables connect the LCD module to the main PCBA of the OEM head unit. Ensure these connections are secure.

Diagrams for FPC connection to LCD module and main PCBA, and how to switch between OEM UI and Add-on UI using the 'INFO' button.

Image: Diagrams showing the correct method for connecting the FPC from the LCD module to the main PCBA of the OEM head unit. Also includes instructions on how to switch between the OEM UI and the add-on UI by pressing and holding the 'INFO' button.

4.3 Detailed Connection Diagram

Refer to this diagram for specific connections including USB expansion, camera power, reversing video input, and audio output.

Detailed wiring diagram for product installation, showing USB expansion, camera power, reversing video input, and audio connections.

Image: Comprehensive wiring diagram detailing connections for USB expansion (for flash disk, mobile phone, software update), front/rear video inputs, camera power (CAN 12V), reverse detection, battery power (BATT+), ground (GND), and audio output to loudspeakers, including an extra microphone input.

Note:

  • Ensure all cables are securely connected to prevent signal loss or malfunction.
  • For fiber optic cable transfer, follow the instructions carefully to move the original fiber optic cable to the corresponding connector.

5. Operating Instructions

5.1 Original Car Button & Dip Switch Explained

Understand how to use your existing car controls to interact with the new interface.

Steering wheel buttons for call functions and system switching/upgrade.

Image: Illustrates the functions of steering wheel buttons: making/receiving calls, long pressing for 3 seconds to switch systems, and short/long presses for hanging up or activating Siri.

  • Steering Wheel Controls:
    - Call Buttons: Use to make and receive calls.
    - Long Press (3 seconds): Switches between the original car system and the Carplay/Android Auto interface.
    - Short Press (Hang Up): Ends a call.
    - Long Press (Siri): Activates Siri (for Apple Carplay).
Car head unit buttons for audio channel, phone, volume, navigation, and system switching.

Image: Shows the functions of the car's head unit buttons: audio channel switching, phone answering, hanging up, navigation, volume adjustment, and system switching via the 'INFO' button.

  • Head Unit Buttons:
    - Audio Channel Switching: Use the relevant button to switch audio sources.
    - Phone Answering/Hang Up: Use the phone buttons.
    - Volume Control: Rotate the knob to adjust volume. Press and hold for 10 seconds to recover the system.
    - 'INFO' Button: Long press to switch between systems.
    - 'NAVI' / 'MAP' Buttons: Access navigation functions.
    - 'SOURCE' / 'MEDIA' Buttons: Control media playback.

5.2 First Connection Operation Description

Follow these steps for the initial setup of wireless Apple Carplay or Android Auto.

5.2.1 Connection Wireless Apple Carplay (Manual Method)

  1. Enter the CARPLAY menu interface (P1 in diagram).
  2. Click 'Settings' then 'Discover and connect devices'. This will open a pop-up window (P2 in diagram).
  3. On your Apple mobile phone, open Bluetooth settings and search for the device named 'CX_BT(device name)' (P3 in diagram).
  4. Click to pair the connection (P4 in diagram).
  5. After successful pairing, click 'Use CarPlay' to enter the CarPlay interface (P5 in diagram).
Screenshots of Wireless CarPlay settings, 'Discover and connect devices' screen, and the pairing prompt.

Image: Screenshots showing the steps to connect Wireless Apple CarPlay: navigating settings, discovering devices, and the Bluetooth pairing process.

Screenshots of Bluetooth pairing request, 'Use CarPlay with 'CARPLAY'?' prompt, and the Apple CarPlay interface.

Image: Further screenshots illustrating the Bluetooth pairing request, the prompt to use CarPlay, and the final Apple CarPlay interface on the car screen.

Note:

  • Your Apple phone must be fully paired with Bluetooth. The wireless CarPlay connection will establish when Wi-Fi is enabled on your phone. CarPlay will connect automatically next time.
  • For the easiest first connection, use the USB wired method. Your mobile phone will enable wireless CarPlay according to instructions. After 15 seconds, disconnect the data cable, and wireless CarPlay will automatically connect.

5.2.2 Connection Wireless Android Auto (Manual Method)

  1. Enter the installation Settings interface, then 'Wireless Android Auto Settings' (P1 in diagram).
  2. Click the pair of 'CX-BT...' (P2 in diagram).
  3. Use your Android mobile phone's Bluetooth to connect to 'CX_BT...'.
  4. After successful pairing, you will enter the Android Auto interface (P3 in diagram).
Screenshots of Wireless CarPlay settings, 'Discover and connect devices' screen, and the Android Auto interface.

Image: Screenshots demonstrating the steps to connect Wireless Android Auto: accessing settings, discovering devices, and the final Android Auto interface.

Note:

  • The easiest first connection for wireless Android Auto is via USB wired method. Your mobile phone will enable wireless CarPlay according to instructions. After 15 seconds, disconnect the data cable, and wireless CarPlay will automatically connect.

5.3 Function Operation Description

Explore the various functions available through the interface.

Screenshots of the main function menu (iOS, Android, Mirroring, USB Media) and the settings menu (Front View, AV in, Home, Settings).

Image: Main function menu showing options for iOS, Android, Mirroring, and USB Media. Also, the settings menu with options for Front View, AV in, Home, and general Settings.

  • Wired/Wireless Carplay & Android Auto: Access your smartphone's features directly on the car screen.
  • Screen Mirroring: Mirror your Apple or Android device's screen.
  • USB Multimedia Playback: Play lossless audio and 720P video from a USB drive.
  • Rear View Video Input: Supports original car's rear-view camera, aftermarket CVBS/AHD rear-view cameras, front-view cameras, or DVR.
  • 360 Panorama: Expandable support for aftermarket 360 panorama systems (CVBS/AHD).
  • Audio EQ Adjustment: Adjust audio equalization settings.
  • Original Bluetooth Call Function: Utilize the car's original Bluetooth for calls.
  • AUX In Function: Expand with digital TV or other AUX sources.
  • Wired Baidu CarLife: Available by enabling in factory settings (password: 0301).

5.3.1 Screen Mirroring

To use screen mirroring, first disconnect any active wireless Carplay or Android Auto connection.

  1. Click the 'Mirroring' icon.
  2. For Apple devices: Connect your Apple mobile phone via USB cable. A prompt will appear on your phone. Follow the instructions to enter the screen mirroring interface.
  3. For Android devices: Insert your Android phone. An 'Autolink' download box will pop up on your phone. Click to download and install the application via your browser. After installation, the auto link icon will appear. Re-insert the Android phone on the 'Mirroring' interface, and a prompt 'Open the USB default connection box' will appear. Click 'OK'. The connection will then be established.
Screenshots for Screen Mirroring (Please plug in iOS or Android device, Screen Mirroring, Autolink prompt).

Image: Screenshots showing the Screen Mirroring interface, prompts to connect iOS or Android devices, and the Autolink download prompt for Android.

5.3.2 USB Media & System Function Settings

The interface allows for USB media playback and various system adjustments.

Screenshots for USB Media player, Audio Settings (Volume, MIC Sensitivity, EQ, Original MIC, Automatic echo cancellation), and Language Settings.

Image: Screenshots of the USB Media player interface, Audio Settings (including volume, MIC sensitivity, EQ, and automatic echo cancellation), and Language Settings options.

  • USB Media: Insert a USB disk to automatically access the USB player interface for audio and video playback.
  • Automatic Echo Cancellation: If you experience call echo, navigate to Audio Settings and enable 'Automatically eliminate the echo'. Adjust your original car's volume to 50-70 for optimal results.
  • Language Settings: Select your preferred language from the installation setting interface.
Screenshots for Audio Settings (Main Volume, Navi Volume, In Call Volume, Ringer Volume, Voice Assistant Volume), Advanced Features (Park Distance control, Aftermarket Camera | Original Camera, AHD Camera Type, Factory USB Switch, Front-view Display Time), and UI Settings (Driver Position, Wallpaper).

Image: Screenshots detailing Audio Settings (Main, Navi, In Call, Ringer, Voice Assistant Volumes), Advanced Features (Park Distance control, camera selection, AHD type, USB switch, front-view display time), and UI Settings (Driver Position, Wallpaper selection).

  • Audio Settings: Adjust main volume, navigation volume, in-call volume, ringer volume, and voice assistant volume. It is recommended to use default values unless specific adjustments are needed.
  • Advanced Features: Configure rear view settings, including aftermarket camera selection (Original Camera or Aftermarket Camera), AHD camera type, factory USB switch, and front-view display time. If installing an AHD camera, select the corresponding frame rate.
  • UI Settings: Customize user interface elements such as driver position and wallpaper.

6. System Upgrade (Maintenance)

To ensure optimal performance and access to new features, you may need to upgrade the system firmware.

Upgrade Procedure:

  1. Prepare USB Device: Copy the upgrade files (ISPBOOOT.BIN and OSU_SETTITINGS folder or Update file) from your computer to the root directory of a USB disk.
  2. Access System Information: From the main interface, navigate to 'Information' then 'About Version' (P1 in diagram) to view current system version information (P2 in diagram).
  3. Initiate Upgrade: Insert the prepared USB disk. Return to the main interface, then go to 'Settings' → 'Version Information' → 'About Device' → 'Update'. Click the corresponding file upgrade option.
  4. The system will automatically read the USB disk and begin the upgrade process (P3 in diagram).
Screenshots for System Upgrade (Information, About Version, Import config from USB).

Image: Screenshots guiding through the system upgrade process: viewing current version information and initiating the upgrade from a USB flash drive.

Important Warning:

  • Do NOT power off the device during the upgrade process.
  • Ensure the USB disk file name is correct.
  • Verify the vision information before proceeding with the upgrade.

7. Common Fault Investigation (Troubleshooting)

This section addresses common issues you might encounter and their potential solutions.

  • Blurred/Indistinct Screen: If the after-sale screen is blurred or indistinct, and the LVDS cable is switched to the host, check for poor contact of the LVDS cable.
  • No Sound from Carplay:
    1. Ensure the Carplay sound channel is selected as the original car AUX.
    2. If still no sound, play music from the aftermarket system first, then switch to the AUX of the original car to activate it.
  • Call Echo: Resolve by enabling 'Automatic Echo Cancellation' in the Audio Settings.
  • No Sound in Carplay Music/Calls: Check if the sound is in the USB AUX channel. Ensure you are not connected to the original car Bluetooth or mobile phone simultaneously.
  • Carplay Connected but Black Screen/No Sound: Turn off mobile Wi-Fi and Bluetooth. Check if the installation interface displays normally. If it fails, set up the after-sale interface.

8. User Tips

  • Verify Compatibility: Before installation, double-check that your Porsche model and year (2010-2016) are compatible with the PCM3.1 system. This interface is specifically designed for PCM3.1 hosts and will not work with CDR hosts.
  • Stay Updated: Regularly check for system updates via USB to ensure optimal performance and access to the latest features and bug fixes.
  • Initial Wired Connection: For the smoothest first-time setup of wireless Carplay or Android Auto, connect your phone via USB initially. This often helps the system recognize and configure the wireless connection more easily.

9. Warranty & Support

CARABC Official Store products undergo strict functional and performance tests to ensure quality. All products come with a one-year warranty service.

Contact Support:

For assistance, please contact CARABC Official Store via WhatsApp: +86 18923410098

Warranty Exclusions:

The following conditions are not covered by the free warranty service:

  • After the free warranty period, or if the appearance is scratched, dirty, or deformed.
  • Inconsistent warranty card/purchase certificate with the product model, or altered marks.
  • Unclear host machine body bar code or absence of a bar code product.
  • Damage due to failure to use, maintain, repair, or refit according to the product manual's requirements.
  • Damage due to force majeure (e.g., fire, flood, traffic accident, lightning, earthquake).

For a detailed user manual in PDF format, please refer to the official document: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.