1. Introduction
The CARABC Wireless CarPlay Android Auto Module integrates advanced smartphone connectivity into your Mercedes Benz vehicle's infotainment system. This module enables seamless access to Apple CarPlay and Android Auto functionalities, including navigation, music, communication, and voice control, enhancing your driving experience.



2. Setup and Installation
2.1. Product Contents
The package includes the main module and necessary accessories for installation.

2.2. Vehicle Compatibility
This module is compatible with specific Mercedes Benz models equipped with NTG 4.5/4.7 or NTG 5.0/5.1 systems.
NTG 5.0/5.1 System Compatibility

| System | Display Screen | Applied To (Model, Year) |
|---|---|---|
| NTG5.0/5.1 | 7"/8"/8.4"/12.3" | W176, A (16-18) W246, B (16-18) W205, C (15-18) W216, CL (16-18) W222, S (14-18) X166, GLS (16-18) W156, GLA (16-18) W253, GLC (16-18) W292, GLE (16-18) W177, CLA (16-18) W639, V250/260 (18-20) W203, CLS (16-18) BENZ X CLASS (15-18) Aston Martin DB11 (2017+) |
NTG 4.5/4.7 System Compatibility

| System | Screen Size | Applied To (Model, Year) |
|---|---|---|
| NTG4.5/4.7 | 5.8inch/7inch | CLA (13-14) ML/GL (13-14) SLK (13-14) GLK (13-14) B CLASS (12-14) C CLASS (12-14) E CLASS (12-15) SL CLASS (12-15) NEW A CLASS (13-15) NEW B CLASS (15) CLS CLASS (12-15) E COUPE (12-14) |
2.3. Installation Instructions
CAUTION: Never turn on the ignition with the factory radio removed.
For detailed wiring diagrams and visual installation steps, please refer to the official user manual PDF: View User Manual (PDF).
2.3.1. Dip Switch Settings
CAUTION: Please ensure the CarPlay POWER is disconnected when adjusting the dip switches. Once the dip switches are set, then connect CarPlay POWER.
The dip switches configure the module for your specific car model and screen size. Refer to the table below:
| Dip 1 | Dip 2 | Car Model (2013-2015 years) |
|---|---|---|
| OFF | OFF | W117, W166, W172, W176, W204, W207, W212, W218, W231, W242, W246, X204 |
| Dip 3 | Dip 4 | Screen Size |
|---|---|---|
| OFF | OFF | 5.8" (400*240) |
| OFF | ON | 7" (800*480) |
2.3.2. Wiring Connections
The installation involves connecting the module to the vehicle's existing wiring harness. Key connections include:
- Power Connections: Yellow (B+), Red (ACC), Black (GND).
- Camera Power Supply: Blue wire for camera power.
- LVDS Cable: Connect the LVDS cable from the module to the original vehicle's LVDS port.
- Antenna: Connect the Wi-Fi antenna. Ensure it is not attached to metal surfaces.
- Video Inputs:
- REAR-CVBS: For rearview camera or 360-degree panoramic AHD output.
- FRONT-CVBS: For front-view camera.
- Audio Output: AUX connection.
- USB: For mobile phone connection, USB flash drive, or software upgrades.
- 360 Panoramic System: Brown (Reserve detect/Rearview light/360 panoramic detection), White (360-TX), White and Black (360-RX).
Important Notes:
- When inserting connectors to the host, ensure they are properly seated and not stuck.
- Ensure the optical fiber from the original car's harness is transferred to the new module's connector correctly.
3. Operating Instructions
3.1. CarPlay and Android Auto Functionality
The module provides a built-in vehicle machine interaction system for iPhone (CarPlay) and Android phones (Android Auto). It supports voice commands, navigation, music, and phone calls, integrating seamlessly with your car's controls.
3.2. Wireless Connection
3.2.1. Wireless CarPlay Connection
- On your iPhone, open Wi-Fi and Bluetooth settings.
- In the module's interface, navigate to 'Wireless CarPlay Settings' and select 'Discover and connect device'.
- Select the Bluetooth device named 'CX_BT.....' from the list and pair your iPhone.
3.2.2. Wireless Android Auto Connection
- On your Android phone, open Wi-Fi and Bluetooth settings.
- In the module's interface, navigate to 'Wireless Android Auto Settings' and select 'CX-BTXXXX'.
- Pair your Android phone with the module.
3.3. Car System Settings and Controls
3.3.1. Steering Wheel Button Controls
- Long press: Switch between systems.
- Short press: Connect/hang up calls, activate voice assistant (Siri).
- Short press: Increase or decrease volume.
- Long press: Restart systems.
3.3.2. Central Control Knob Instructions
- Long press: Cut the system.
- Knob movement: Move cursor, short press to confirm, move left/right to select next/previous song.
- Long press: Confirm to activate voice.
- Move left for 3s: Activate HICAR mouse.
- Move right: Control HICAR mouse up and down.
- Move right for about 15s: Reduce HICAR mouse.
3.3.3. Audio Settings
- Ensure the original car's Bluetooth audio is set to 'off' in the module's audio settings (Setup > Audio Settings > Use the original Bluetooth Audio > Off).
- Select 'Aux' as the original multimedia input.
- For cell phone Bluetooth connection, ensure you select 'Bluetooth audio playback' from the original car's Bluetooth audio settings.
4. Troubleshooting
4.1. Common Issues and Solutions
- Screen not displaying normally: Check the LVDS cable connection and verify the DIP Switch settings are correct for your vehicle model and screen size.
- No sound or poor audio quality: Ensure the Multimedia and install system settings of the original car are configured correctly, especially the Bluetooth audio and AUX input settings.
- Mainframe pilot lamp not working or no power: Check the power cable connections and inspect the fuse for any damage.
- USB charging current protection: If the USB charging current exceeds 1A, the module will activate circuit protection to keep the current below 1.5A to prevent damage.
5. Specifications
| Feature | Specification |
|---|---|
| Operating Voltage | 9-16V |
| Operating Temperature | -30 ~ +75°C |
| Stored Temperature | -30 ~ +85°C |
| Environment Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption (Rated) | 500mA |
| Power Consumption (Max) | 3A |
| Shutdown Current | 3mA (Clock is on) |
| Quiescent Current | Less than 3mA |
| Charging Current (USB) | ≤2A (Circuit protection activates if >1A to keep current below 1.5A) |
6. User Tips
- For optimal performance, ensure your smartphone's operating system (iOS or Android) is up to date.
- If experiencing connectivity issues, try restarting both the module (by long-pressing the steering wheel button) and your smartphone.
- Always ensure the Wi-Fi antenna is securely connected and positioned away from metal obstructions for the best wireless signal.
7. Support and Further Information
For comprehensive details, including advanced settings, detailed wiring diagrams, and warranty information, please refer to the complete user manual available in PDF format: