XIAOMI Mijia Wireless Car Washer 2

Contents

Xiaomi Mijia Wireless Car Washer 2 User Manual

Model: MJXCJ002QW

Introduction

Thank you for purchasing the Xiaomi Mijia Wireless Car Washer 2. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read all instructions carefully before use and retain this manual for future reference.

Xiaomi Mijia Wireless Car Washer 2 with foam bottle and spray nozzle, showing usage scenarios on the right.

The Xiaomi Mijia Wireless Car Washer 2, designed for efficient and portable cleaning.

Safety Precautions

  • Read all instructions before use; keep for future reference.
  • Do not spray at people, animals, electrical equipment, or the machine itself.
  • Use only clean water; avoid sand, debris, or corrosive liquids (acid/alkali).
  • Do not use while charging; keep the charging port dry at all times.
  • Do not operate for more than 15 minutes continuously to prevent overheating.
  • Keep away from children; do not let minors operate the machine.
  • Do not disassemble, modify, or short-circuit the battery.

Package Contents

Verify that all items are present in the package:

  • Car Washing Machine (Main Body) x 1
  • Gun Barrel (3-in-1 Nozzle) x 1
  • Soap Dispenser (250ml Foam Bottle) x 1
  • Water Inlet Pipe (6m Hose) x 1
  • Hose Clamp x 1
  • User Manual x 1
Diagram showing all components included in the package: car washing machine, gun barrel, soap dispenser, water inlet pipe, and instruction manual.

All components included in the Xiaomi Mijia Wireless Car Washer 2 package.

Product Overview

The Xiaomi Mijia Wireless Car Washer 2 is a portable, high-pressure cleaning device designed for various applications. Key features include:

  • Net Weight: Approximately 1.1 kg
  • Battery: 2000mAh high-capacity lithium-ion (10.8V, 21.6Wh)
  • Charging: Type-C port (charger not included)
  • Charging Time: Approximately 2.5 hours (with a 9V/2A charger)
  • Working Time: Up to 15 minutes on a full charge
  • 3 Spray Modes: Rotate the nozzle to switch between High-pressure, Fan, and Foam modes.
Image highlighting the 2000mAh battery capacity and long-lasting endurance for cleaning an entire car.

The 2000mAh battery provides long-lasting endurance for comprehensive cleaning.

Setup

4.1 Install the Foam Bottle

  1. Align the mark on the foam bottle with the "O" mark on the handle.
  2. Rotate 90° clockwise until it locks.
  3. Push the lock button forward to secure.

4.2 Connect the Water Hose

  1. Submerge the inlet filter head into clean water (bucket/tap).
  2. Use the hose clamp to fix the filter to the bucket edge.
  3. Connect the hose connector firmly to the machine's inlet port until it clicks.
Image showing the water pipe with an upgraded filter head designed to sink naturally in a bucket.

The upgraded water pipe filter head ensures it stays submerged for continuous water intake.

4.3 Battery Check & Charging

To check the battery level, press the battery indicator button. The four LED lights indicate the charge level:

  • 4 LEDs = 100%
  • 3 LEDs = 75%
  • 2 LEDs = 50%
  • 1 LED = 25%

For charging, open the Type-C waterproof cover and connect a charger. The LEDs will flash while charging and remain solid when fully charged. Note that a charger is not included; a 9V/2A charger is recommended for optimal charging time.

Close-up of the car washer's base showing the Type-C interface and four battery indicator lights.

The Type-C charging port and four-grid battery indicator lights.

Operation

5.1 Prepare Cleaning Solution

Dilute car shampoo in the foam bottle. A 1:10 ratio is recommended. Do not fill the foam bottle more than 80% full.

5.2 Power On

Press and hold the power button for 2 seconds to turn on the device.

5.3 Spray Control

Press the trigger to start spraying and release it to stop.

5.4 Mode Switch

Rotate the nozzle to select your desired spray mode: High-pressure, Fan, or Foam.

Close-up of the nozzle, showing how to twist it to switch between three practical water types.

Twist the nozzle to easily switch between high-pressure, fan, and foam spray modes.

5.5 Cleaning Steps

  • Foam mode: Cover the car with foam and let it sit for 2-3 minutes.
  • High-pressure mode: Use to rinse heavy dirt (e.g., wheels, undercarriage).
  • Fan mode: Use to rinse the entire body evenly.
Car washer in high-pressure mode, cleaning a car wheel with a strong jet of water.

High-pressure mode effectively cleans stubborn dirt from car wheels.

Diagram illustrating the concentrated high-pressure spray pattern.

High-pressure gear for cleaning stubborn stains.

Diagram illustrating the wide fan-shaped spray pattern.

Fan-shaped gear for quickly cleaning and scouring foam over a large area.

Diagram illustrating the foam spray pattern.

Foam gear to wet the body and spray rich foam.

5.6 Power Off

Press the power button for 2 seconds to shut down the device.

Care & Maintenance

  1. After each use, rinse the foam bottle and hose with clean water. Empty any residual water.
  2. Clean the inlet filter regularly to prevent clogging.
  3. Store the device in a dry, cool place. Avoid direct sunlight and freezing temperatures.
  4. Do not store the device with water inside the pump.
  5. Charge the battery every 3 months if the device is not in use for long periods.

Troubleshooting

IssueCauseSolution
No water spray / Weak pressureInlet filter blocked; hose bent; water level too high; machine ≤1.5m above waterClean filter; straighten hose; keep machine ≤1.5m above water
No foamEmpty foam bottle; nozzle not in foam modeRefill solution; switch to foam mode
Machine won't startBattery dead; not installed properlyRecharge battery; reinstall battery firmly
Leaks at nozzle/hoseLoose connection; nozzle not lockedTighten connectors; rotate nozzle to lock position
Auto shut-offOverheat protection; low batteryLet cool; recharge

Specifications

FeatureDetail
ModelMJXCJ002QW
Dimensions300 x 309 x 80 mm
Net Weight1.1 kg
Rated Input5V/10W, 9V/18W
Battery TypeLithium-ion battery
Rated Capacity2000mAh
Rated Energy21.6Wh
Charging Time~2.5 hours (with 9V/2A charger)
Working TimeUp to 15 minutes (full charge)
Protection ClassIPX5 (water-resistant)
Hose Length6 m
Foam Bottle Capacity250 ml
High-pressure Mode1.5±0.2 MPa, 107±18 L/h
Fan Mode0.7±0.2 MPa, 140±18 L/h
Foam Mode0.4±0.2 MPa, 160±18 L/h
Wireless CommunicationNon-Remote Function
Power SourceOther (Battery Powered)
Battery IncludedNo (Internal, but charger not included)
OriginMainland China
Implementation StandardsGB 4706.1-2005G Gua B 4706.61-2008

For more detailed information, you may refer to the User Manual (PDF).

User Tips

  • Battery Life: While rated for up to 15 minutes, some users report battery life closer to 30 minutes, especially for lighter tasks like washing motorcycles.
  • Charger: The product does not include a charger. Ensure you have a Type-C charging cable and a 9V/2A charger for optimal 2.5-hour charging. Using a different charger may result in longer charging times.
  • Filter Maintenance: Regularly check and clean the water inlet filter to prevent clogging and ensure consistent water suction and pressure.
  • Versatility: This car washer is practical for home use, including washing cars and motorcycles. It can also be used for other tasks like outer window cleaning, courtyard maintenance, plant watering, and general home cleaning.
Four icons representing various uses: outer window cleaning, courtyard maintenance, plant watering, and home cleaning assistant.

The Xiaomi Mijia Wireless Car Washer 2 can be used for multiple cleaning tasks around the home and garden.

Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the official Xiaomi website or contact your local authorized dealer. Keep your purchase receipt as proof of purchase.

© 2024 Xiaomi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.