HeltecBMS 5A Active Equalizer Balancer

Contents

HeltecBMS 5A Active Equalizer Balancer User Manual

Model: 5A Active Equalizer Balancer

Brand: HeltecBMS

1. Introduction

As the number of battery cycles increases, the rate of battery capacity decay is inconsistent, leading to a serious imbalance in battery voltage. This "battery barrel effect" will influence the service life of your battery. An active balancer is essential for maintaining battery pack health.

Unlike inductive balancers, this capacitor balancer achieves whole-group balance without requiring a voltage difference between adjacent batteries to initiate balancing. Once activated, it reduces capacity decay caused by voltage imbalances and shortens the duration of the balancing process.

For additional information, you may refer to the official user manual PDF: HeltecBMS 3-21S 5A Capacitor Active Balancer Specifications (PDF)

2. Safety Information

  • Always disconnect the battery pack from any power source before installation or maintenance.
  • Ensure correct polarity when connecting the balancer to avoid damage to the device and battery.
  • Do not short-circuit the balancer terminals.
  • Keep the device away from water, moisture, and extreme temperatures.
  • Handle with care to prevent physical damage to the circuit board.
  • Installation should be performed by individuals familiar with battery systems and electrical safety.

3. Product Overview

Key Features

  • Multi-Chemistry Support: Seamless compatibility with NCM, LFP, and LTO battery types.
  • Manual Sleep Switch: Enables user-controlled low-power mode (<0.1mA standby).
  • Plug-and-Play Design: Easy integration for DIY projects or commercial systems.
  • 5A High-Current Active Balancing: Efficiently balances cells with up to 5.5A current.
  • Universal Compatibility: Supports various cell counts from 3S to 21S depending on the model.

Applications

  • Electric Vehicles/Tools: Maximizes range and performance with high-energy NCM batteries.
  • Solar Energy Storage: Works with LFP/LTO for long-cycle, multi-string energy storage solutions.
  • Industrial Equipment: Reliable in extreme conditions (e.g., high temperature/humidity) leveraging LTO’s thermal stability.

Product Visuals

HeltecBMS 5A Active Balancer board with wires and PH2.0 connector highlighted
HeltecBMS 5A Active Balancer board with wires and PH2.0 connector highlighted.
HeltecBMS 5A Active Balancer board with connected switch
HeltecBMS 5A Active Balancer board with connected switch.
Close-up of the switch function on the HeltecBMS active balancer
Close-up of the switch function on the HeltecBMS active balancer.
Video demonstrating the manufacturing process of the HeltecBMS active balancer.

4. Specifications

Core Specifications

  • Voltage Range: 2.7V-4.5V (Compatible with NCM/LFP/LTO battery chemistries)
  • Supported Batteries: Lithium Nickel Cobalt Manganese (NCM), Lithium Iron Phosphate (LFP), Lithium Titanate Oxide (LTO)
  • Balancing Current: 0-5.5A (Intelligent dynamic adjustment; lower current when cells are balanced)
  • Sleep Mode Power: ≤0.1mA (Manual sleep switch for deep low-power standby)
  • Voltage Accuracy: ±5mV (Precision control for extended battery lifespan)

Detailed Technical Index

Technical Index Product Model (SKU by default)
0855A 1004A 0877A 1400 0999A16 1323
Battery Strings 3S-4S 4S-6S 6S-8S 9S-14S 12S-16S 17S-21S
Battery Type NCM/LFP NCM/LFP/LTO
Working Voltage Range NCM/LFP: 2.7V-4.5V
LTO: 1.8V-3.0V
Voltage Balancing Accuracy 5mv (typical)
Balance Mode The whole group of battery participate in the active equalization of energy transfer at the same time
Balancing Current 0.08V differential voltage generates 1A balance current. The maximum allowable balance current is 5.5A.
Static Working Current 13mA 8mA 8mA 15mA 17mA 16mA
Working Temp -10°C ~ 60°C
External Power No need for external power supply, relying on the internal energy transfer of the battery to achieve the whole group balance.

Dimensions

Dimensions of the HeltecBMS 3-4S balancer board (W: 46mm, L: 66mm, H: 16mm)
Dimensions for 3-4S Balancer (Model 0855A): Width: 46mm, Length: 66mm, Height: 16mm.
Dimensions of the HeltecBMS 12-16S balancer board (W: 91mm, L: 125mm, H: 16mm)
Dimensions for 12-16S Balancer (Model 0999A16): Width: 91mm, Length: 125mm, Height: 16mm.

5. Setup and Installation

Important Note: The 3S-4S balancer models do not support LTO batteries; they only support lithium ternary (NCM) and LiFePO4 (LFP) batteries.

General Wiring Guidelines

  • Connect the balance wires to the corresponding battery cells, starting from B- (negative terminal of the first cell) to B+ (positive terminal of the last cell).
  • Ensure all connections are secure and correctly matched to the cell voltages.
  • The balancer does not require an external power supply; it draws power directly from the battery pack for balancing.

Wiring Diagram for 4S Battery Pack (Example for 3-4S Balancer)

Wiring diagram for a 4S battery pack connected to the HeltecBMS 3-4S balancer
Connect B1 to the positive of cell 1, B2 to the positive of cell 2, B3 to the positive of cell 3, and B4 to the positive of cell 4. The B- terminal connects to the negative of cell 1.

Wiring Diagram for 16S Battery Pack (Example for 12-16S Balancer)

Wiring diagram for a 16S battery pack connected to the HeltecBMS 12-16S balancer
Connect B1 to B16 to the respective cell positive terminals. The B- terminal connects to the negative of the first cell.

LTO Battery Welding Modification (for compatible models)

For models that support LTO batteries, a specific welding modification might be required. Generally, the default welding is for NCM/LFP batteries.

Diagram showing LTO battery welding modification for 3-4S balancer
Default (NCM/LFP): Weld point 2 and 3. For LTO: Disconnect points 2 and 3, then connect point 1 and 2 by yourself.

6. Operating Instructions

Working Principle

The balancer operates on the principle of capacitive energy transfer. The larger the differential voltage between cells, the greater the equalization current. As the battery cells become more balanced, the working current decreases. This active balancer can achieve a maximum equalizing current of 5.5A and maintains a balance voltage accuracy within 5mV.

It features under-voltage sleep protection: the balancer will automatically stop operating when the voltage drops below 3.0V for NCM/LFP batteries or 1.8V for LTO batteries. In sleep mode, the standby power consumption is less than 0.1mA.

Using the On/Off Switch

Some models are equipped with an external On/Off switch. This switch allows you to manually put the balancer into a deep low-power standby mode, further reducing quiescent current when the battery pack is not in active use or storage. Ensure the switch is in the 'On' position for active balancing and 'Off' for standby.

7. Maintenance

  • Regular Inspection: Periodically check all wiring connections for looseness or corrosion.
  • Cleanliness: Keep the balancer board clean and free from dust and debris. Use a soft, dry brush or compressed air for cleaning.
  • Environmental Conditions: Ensure the balancer operates within its specified working temperature range (-10°C to 60°C) and avoid exposure to excessive humidity.
  • Firmware Updates: Check the manufacturer's website (www.heltec-energy.com) for any available firmware updates, though this device typically does not require user-initiated updates.

8. Troubleshooting

  • Balancer Not Activating:
    • Check all balance wire connections for correct polarity and secure contact.
    • Ensure the battery voltage is above the under-voltage sleep protection threshold (3.0V for NCM/LFP, 1.8V for LTO).
    • If equipped with a switch, ensure it is in the 'On' position.
  • Ineffective Balancing:
    • Verify that the balancer model matches your battery string count (e.g., a 3-4S balancer cannot balance a 10S pack).
    • Confirm the battery type (NCM/LFP/LTO) is compatible with your specific balancer model, especially for 3S-4S models which do not support LTO.
    • Allow sufficient time for balancing, especially for large capacity differences.
  • Overheating:
    • While designed for low heat, ensure adequate ventilation around the balancer.
    • Verify that the balancer is not overloaded or connected to an incompatible battery pack.

9. User Tips

  • Observe Balancing Effectiveness: Users have reported significant voltage equalization. For example, a battery pack with initial cell voltages ranging from 3.88V to 4.15V was balanced to a very tight range of 4.05613V to 4.05862V, resulting in a voltage difference of only 2.5mV. This demonstrates the high precision of the balancer.
  • Consider Acrylic Case: An optional acrylic case is available for protection, which can be beneficial for long-term durability, especially in environments where the board might be exposed to physical damage or dust.
  • HeltecBMS balancer board with an acrylic protective case
    HeltecBMS balancer board with an optional acrylic protective case.

10. Warranty and Support

Manufacturing Quality: HeltecBMS is committed to providing stable Battery Management System products. Our products undergo rigorous testing and are manufactured in facilities that adhere to quality standards.

Images showing HeltecBMS certifications and manufacturing facility
HeltecBMS certifications and manufacturing facility.

Contact Information: For technical support, inquiries, or warranty claims, please contact:

  • Sales Manager: Sucre Cheung
  • Tel/WhatsApp/WeChat: +86 13688442313
  • Email: sucre@heltec-bms.com
  • Website: www.heltec-energy.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.