1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Dooya DT82TV Curtain Motor and Track Set. The DT82TV motor supports RS485, Dry Contact, and RF433 control methods, offering versatile integration into smart home systems. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Package Contents
Your package should contain the following items:
- 1 x Dooya DT82TV Curtain Motor (2023 new version, roll codes)
- 1 x Customized Curtain Rail Track with Installation Accessories (runners, slip parts assembly, ceiling brackets)
- 1 x DC2700A 433MHz Remote Controller (battery not included)
Note: The DT82TV motor is also compatible with Dooya KT82/DT82 TN/TV/LE motors or Xiaomi curtain motors.
3. Specifications
| Feature | Description |
|---|---|
| Model Number | DT82TV / NAC-1.2/14 |
| Brand Name | BIAONU (Dooya) |
| Voltage | 110-240V |
| Rated Power | 50W |
| Frequency | 433Hz |
| Torque | 2Nm |
| Speed | 12cm/s |
| Max Load Weight | 65kg |
| Sound Level | 30dB |
| IP Grade | IP20 |
| Material | High Quality Aluminum-magnesium alloy |
| Accessories | Runners, track, slip parts assembly, ceiling bracket |
| Sliding Device | General pulley |
| Available Window Types | For All window (135 degree U type/90 degree L type) |
| Battery Included | No |
| Customization | Yes |
| Motor Length (2023 version) | 275mm |
4. Installation
4.1. Track Measurement Method
Accurate measurement is crucial for proper track fit. Consider the installation space required.
- For Full Wall Installation: Measure the width of your window (A). The track length should be A - 4CM (allowing 4cm for installation space).
- For Non-Full Wall Installation: Measure the width of your window (A). The track length should be A + 60CM (allowing 30cm extension on each side).

4.2. Curtain Open/Close Mode
Determine your preferred curtain opening style:
- Single Open: Curtains open from one side (left or right). One motor is used.
- Double Open: Curtains open from the center to both sides. One motor is used.

4.3. Mounting Method
The track can be mounted in two ways:
- Ceiling Mounting: Ceiling mounted brackets are included. Suitable for installations with or without a curtain box.
- Wall Mounting: Wall mounted brackets are NOT included and must be ordered separately. Approximately 2 wall mount brackets are needed per meter of curtain track.

4.4. Motor Installation Precaution
Important: Install the slip parts assembly before operating the track. Do NOT install the motor onto the track until you can operate the track smoothly manually. Failure to do so may damage the belt.
5. Wiring Diagrams
5.1. 5-Wire Curtain Motor Wiring
The DT82TV motor uses a 5-wire connection. Ensure correct wire connections as shown in the diagram:
- Black wire: Close line
- Brown wire: Live line
- White/Grey wire: Open line
- Blue wire: Neutral line
- Yellow/Green wire: Ground line


5.2. RS485 and Dry Contact Interface
The DT82TV motor features RS485 and Dry Contact interfaces for advanced control:
- RS485 Interface: Connects to RS485 A-line and RS485 B-line for intelligent control systems.
- Dry Contact Interface: Connects to Up line, Down line, and Common line for simple switch control.

5.3. Strong Electric Switch Installation
For strong electric switch control, follow these wiring instructions:
- Mode 1 & 3: Blue=Neutral, Black=Down, White/Gray=Up, Brown=Live, Yellow/Green=Earth.
- Hotel Mode: Blue=Neutral, Black=NC, White=Hotel Mode, Brown=Live, Yellow/Green=Earth.
Caution: The Neutral line and the Live line cannot be reversed. If any wire is exposed, press with a pressure line cap and ensure proper insulation.


6. Operation
6.1. Key Features
The DT82TV motor offers several advanced features for user convenience:
- Silent Design: Ensures quiet operation.
- Soft Start and Stop Function: Provides smooth curtain movement.
- Electronic Memory Limit Function: Automatically remembers open/close positions.
- Built-In Receiver Function: For RF433 remote control.
- Resistance and Stop Function: Stops if an obstruction is detected.
- Light Touch-Start Function: Gently pull the curtain to initiate movement.
- Power Off Manual Function: Allows manual operation during power outages.
- Automatic Adjust The Speed Function: Optimizes curtain speed.
- Smart Home Connection: Compatible with RS485 and Dry Contact systems.

6.2. RS485 Setting Up
To set up the RS485 function:
- Press the program button for 5 seconds.
- Release the button.
- Press the button 3 times.
- Press the button again for 5 seconds. The LED will flash 5 times, indicating successful setup.
- Use the RS485 intelligent control terminal to send the ID command.

7. User Tips
- Customization: The curtain track length and open/close mode (single or double) can be customized to fit your specific window requirements. Ensure you provide accurate measurements and preferences when ordering.
- U-shaped or L-shaped Tracks: If your window requires a U-shaped or L-shaped track, please inform the seller as these are custom options and may incur additional costs compared to straight tracks.
- Remote Control Battery: The remote controller does not include a battery due to shipping restrictions. Please purchase the required battery separately.
8. Maintenance
- Regularly inspect the track for any obstructions or debris that might hinder smooth operation.
- Keep the motor and track clean using a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Check wiring connections periodically to ensure they are secure and free from damage.
- If the motor's performance degrades, consult the troubleshooting section or contact support.
9. Troubleshooting
If you encounter issues with your Dooya DT82TV curtain motor, consider the following:
- Motor Not Responding: Check power supply, remote control battery, and ensure the motor is properly connected to the track.
- Curtain Movement is Jerky or Stops: Inspect the track for obstructions, ensure the belt is not damaged, and verify that the track is installed smoothly.
- Remote Control Issues: Replace the remote control battery. Re-pair the remote with the motor if necessary (refer to motor's specific pairing instructions, not detailed in this general manual).
- Wiring Problems: Double-check all wiring connections against the diagrams in Section 5. Ensure Live and Neutral lines are not reversed.
For persistent issues, contact customer support.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the manufacturer directly. Keep your purchase records for any warranty claims.