1. Introduction
This manual provides essential information for the safe and effective use of your Metal Heavy Duty Corner Brackets. These brackets are designed for robust reinforcement and connection in various woodworking and furniture assembly projects. Please read all instructions carefully before installation and use.
For a detailed PDF version of this manual, please refer to the official document: User Manual (PDF).
2. Safety & Warnings
⚠ Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the product and its accessories out of reach of children under 3 years old.
- Strictly prohibit overloading. Overloading the use may cause the connection parts to break or the screws to come out, resulting in the collapse of the furniture, injuries to people or property damage.
- When installing, please wear protective gloves to avoid being injured by sharp metal edges.
- Screws that match the diameter of the angle code holes must be used. Oversized screws may cause the angle code to deform or break.
- Do not over-tighten the screws, as it may cause thread breakage or damage to the sheet material.
- Regularly check whether the screws are loose. If any rust or deformation is found, they should be replaced immediately.
3. Product Overview
The Keenkee Metal Heavy Duty Corner Brackets are L-shaped iron brackets designed for robust reinforcement and connection in various woodworking and furniture assembly projects. They are available in black and silver finishes.
Figure 1: Front view of black and silver corner brackets.
Figure 2: Package contents showing two black corner brackets and screws.
Video 1: Product demonstration showcasing the corner bracket and its application.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | M00176 |
| Batch/Serial Number | WXM00176-2601 |
| Type | Corner Brackets |
| DIY Supplies | Woodworking |
| Material | Iron |
| Dimensions (approx.) | 1.9" (49mm) x 2" (50.5mm) x 2" (50.5mm) |
| Thickness (approx.) | 2mm (0.12") |
| Origin | Mainland China |
| Package Weight (approx.) | 0.168 kg |
| Package Dimensions (approx.) | 18cm x 14cm x 6cm |
Figure 3: Detailed dimensions of the corner bracket.
5. Installation Instructions
These brackets are suitable for various types of metal furniture corner brackets, connecting pieces, fixing plates, and support frames, including L-shaped, T-shaped, and straight bar-shaped ones.
Correct Usage Method:
- Positioning: Place the angle peg tightly against the corner angle between the two connection surfaces, maintaining a 90° angle or the angle required by the design.
- Pre-drilling (recommended): To reduce the risk of wood cracking, it is recommended to use a drill bit with a diameter slightly smaller than the screws to make the initial holes.
- Fixing: Insert the screws through the holes in the corner brackets, then use a screwdriver or electric drill to tighten them until the corner brackets are tightly attached to the surface of the panel.
- Check: Ensure that all screws are not loose and the corner brackets are not deformed.
Figure 4: Example of a corner bracket installed on wooden furniture.
Product Usage Limitations:
- This product is only suitable for indoor dry environments. Do not use it in damp or acidic/basic conditions.
- This product is an auxiliary support component and cannot replace the main load-bearing structure.
- Prohibition of installation on surfaces such as glass, thin-walled metal pipes (with a wall thickness of less than 1mm), gypsum boards, foam bricks, and ceramic tile finishes that cannot provide sufficient holding force for nails.
6. Maintenance
To ensure the longevity and safety of your corner brackets:
- Regularly check whether the screws are loose. Tighten them as needed.
- If any rust or deformation is found on the brackets or screws, they should be replaced immediately to maintain structural integrity.
- Keep the brackets clean and dry to prevent corrosion.
7. Troubleshooting
If you encounter issues with your corner brackets, consider the following:
- Bracket deformation or breakage: This can occur if oversized screws are used or if the furniture is overloaded. Ensure correct screw size and do not exceed the load capacity of the furniture.
- Screws coming loose or thread breakage: Over-tightening screws can cause thread damage. Ensure screws are tightened firmly but not excessively. Regularly check and re-tighten if necessary.
- Furniture collapse: This is a serious safety concern. It can be caused by overloading or installation on unsuitable surfaces that cannot provide sufficient holding force. Always ensure the brackets are used as auxiliary support and not as the sole load-bearing structure, and install on appropriate materials.
8. User Tips
- Always verify that the quantity and details of the product received match the description before starting installation.
- During use, periodically check the quality and stability of the installed brackets to ensure continued reinforcement.
9. Manufacturer & Support Information
Manufacturer:
Company Name: Shenzhen Wenxinmeijia Household Product Co., Ltd
Full Address: B1C031 #5 Plaza, Huanancheng Pinghu, Longgang District Shenzhen City
Email: servicenter@keenkee.online
Telephone: 86-13164762726
EU Authorized Representative:
AR Company Name: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA
Full Address: CASTELLANA 9141, 28046 Madrid, Spain
Email: compliance.gavimosa@outlook.com
Telephone: 34-688185858
Compliance Information:
This product complies with the health, safety, and environmental protection standards, indicated by the CE Mark.
CE Mark