Introduction
This manual provides essential information for the safe and efficient use of your Decopedia Motorized Smart Roller Shades. Please read it thoroughly before installation and operation, and keep it for future reference.
These smart roller shades offer convenience and modern control, including remote, app, and voice commands, enhancing your home's comfort and energy efficiency.
Safety Notes
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Do not allow children to play with fixed controls. Keep remote controls away from children. Safety of persons to follow these instructions. Save these instructions.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- The instructions shall state that the A-weighted emission sound pressure level of the drive is equal to or less than 70 dB(A), e.g. by writing LPA ≤ 70 dB(A).
- The mass and the dimension of the driven part shall be compatible with the rated torque and rated operating time.
- Frequently examine the installation for imbalance and signs of wear or damage to cables and springs.
- Do not use if repair or adjustment is necessary.
- Before installing the drive, remove any unnecessary cords and disable any equipment not needed for powered operation. Watch the moving shutter and keep people away until the shutter is completely closed.
- WARNING: the drive shall be disconnected from its power source during cleaning, maintenance and when replacing parts.
- WARNING: Important safety instructions. It is important for the safety of persons to follow these instructions. Save these instructions.
- WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury.
Battery Safety Warning: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.
Components
Your Decopedia Roller Shades package typically includes the following components:
- Roller Shade Unit: Fabric shade with integrated motor and rigid roller bar.
- Smart Emitter (Remote Control): AC2201-15A, a 15-channel remote for controlling shades.
- Mounting Brackets: For secure installation.
- Bottom Rail: White round bottom rail (default) or optional flat bottom rail.
- USB Type-C Charging Cable: For charging the motor's built-in lithium battery.
- User Manual (PDF): A detailed guide for setup and operation.
Specifications
General Product Specifications
- Model Number: Decopedia-no valance roller shades
- Type: Roller Shades (Manual cordless, Motorized options)
- Style: Roman, Modern simple nordic blackout light filtering room darkening
- Material: Fabric (Faux linen, various colors)
- Technics: Plain
- Pattern Type: Horizontal
- Opening and Closing Method: Lower Open
- Installation Type: Exterior Installation, Side Installation, Built-in, Ceiling Installation
- Applicable Window Type: Octagonal Window (and others)
- Format: Electric
- Shading Rate: 40%-99% (depending on fabric choice)
- Features: Waterproof, Dustproof, Mouldproof
- Application: Bedroom, Living room, Bathroom, Office, Kitchen
- Is Smart Device: Yes
- Is Customized: Yes
Motor (AM25LE/A) Specifications
| Parameter | Description |
|---|---|
| Wireless Frequency | 433 MHz |
| Rated Torque | 0.6 N.m |
| Output Speed | 20-25-30 Rpm |
| Charging Voltage | 5V |
| Battery Capacity | 14 Wh (Built-in Lithium Battery) |
| Working Voltage | 12 V |
| Rated Power | 0-40 W |
| Working Temperature | 0-40 °C |
| Motor Length | 475 mm |
Motor Features: Fastlink, Radio Control, Wireless Remote Control, Hidden Antenna, Electronic Limit, Memorized Setting, Stall Protection, Dimmer, Speed Regulation, Third Limiting Site, Wireless Signal Encryption, Quiet Motor.
Roller Bar & Fabric Details
- Rigid Roller Bar: Designed for amazing load capacity.
- Max Width: 240 cm (94 inches)
- Max Length: 1000 cm (393 inches)
- Fabric Layers: Waterproof Layer, Top Grade Polyester Layer, UV Block Layer.
- UV Block: 99%
- Thermal Insulated: Yes
Package Dimensions
- Length: 7 units
- Width: 8 units
- Height: 1 unit
- Weight: 0.1 units
Setup
1. Installation
Mount the brackets securely to your window frame or ceiling. Ensure the brackets are level and spaced correctly to support the roller shade unit. The brackets have dimensions of 6.1cm (2.4") width and 7.5cm (2.95") height.
2. Quick Matching (Remote Control)
This process pairs your remote control with the roller shade motor.
- Step 1: Make sure the motor is ON.
- Step 2: Press the motor 'M' button for 2 seconds. The motor will rotate back and forth once, indicating it has entered the matching state (valid for 60 seconds).
- Step 3: On your remote, select the channel you want to match. Then, press the 'S' key once. The motor will rotate back and forth once, confirming successful matching.
Note: In 'admin' mode, the Emitter channel shows a slow flash, and Channel '00' is invalid.
3. Setting Limits (Upper and Lower)
Setting the upper and lower limits ensures the shade stops at your desired open and closed positions.
- Step 1: Set Upper Limits: Use the front button of the transmitter to stop the curtain at the required upper travel point. Press the 'A' button for 2 seconds; the motor will rotate once, confirming the upper limit is set.
- Step 2: Set Lower Limits: Use the front button of the transmitter to stop the curtain at the desired lower travel point. Press the 'V' button for 2 seconds; the motor will rotate once, confirming the lower limit is set.
Note: In Admin mode, curtain operation will switch between inching operation and continuous operation, allowing for precise stroke adjustment. Once limits are set, the system enters 'user' mode for normal operation.
4. Motor Reversing
If the running direction of the curtain is opposite to that of the transmitter button:
- Method 1: Press both the Up and Down buttons together until the motor rotates once.
- Method 2: Press the 'M' key for 10 seconds; the motor will rotate a third time.
5. Add a New Emitter
To control the motor with an additional remote (e.g., emitter B when emitter A already controls it):
- Method 1: On the existing remote (emitter A), press the 'S' key once. The motor rotates once. Then, on the new remote (emitter B), press the 'S' key once. The motor rotates once, confirming pairing.
- Method 2: For emitter B, follow the 'emitter quick matching' procedure as described in section 2.
6. Emitter Access Channel Selection
To hide unused channels on a 15-channel remote:
- Press and hold both channel switch keys simultaneously. The emitter display will show 'L', then '15'. Release the keys.
- Use the channel switch button to select the channels you wish to keep.
- Confirm the selected channels using the emitter stop key.
Note: Reserved channels can only be counted from channel 1 (e.g., 1-5). No support for non-sequential channels (e.g., 3-7). Repeat the operation to adjust the final required number of channels.
7. Smart Home Integration
Your Decopedia smart roller shades are compatible with popular smart home systems like Alexa and Google Home. A gateway (often included) is required for this functionality. Refer to the gateway's specific instructions for connecting it to your smart home ecosystem.
Video demonstrating smart home integration with Alexa, showing multiple blinds being controlled simultaneously.
Operation
1. Remote Control (Smart Emitter)
The AC2201-15A remote control allows for precise operation of your shades.
- Up Button: Raises the shade.
- Down Button: Lowers the shade.
- Stop Button: Stops the shade at its current position.
- Channel Buttons (+/-): Selects the desired channel (shade or group of shades).
- Favorite Point: Pressing the 'A' and 'V' buttons together for 2 seconds will set a common shading effect or preferred position.
- Repeated Short Press: Initiates a turn-stop-turn-stop circular motion for emergency situations.
Video demonstrating remote control operation (open, close, stop, set limits) and app control (swipe to open, stop at preferred position).
2. App Control
Control your shades conveniently from your smartphone using the dedicated app (e.g., Smart Life app).
- Swipe to Open/Close: Use intuitive swipe gestures to raise or lower the shades.
- Stop at Preferred Position: The app allows you to stop the shades at any desired intermediate position.
- Timer Set: Set schedules for automatic opening and closing of your blinds.
3. Voice Control
Integrate your shades with smart assistants like Alexa or Google Home for hands-free control. Once connected via the gateway, you can use voice commands such as "Alexa, open the blinds" or "Hey Google, close the living room shades."
4. Motor Speed Regulation
The motor has three speed gears. The default setting is gear 1 (slower and quieter). You can adjust the speed:
- To increase speed by one gear: Press and hold both the Up and Down buttons until the motor jogs.
- To decrease speed by one gear: Press and hold both the Up and Down buttons until the motor jogs.
Note: Only one gear can be raised or lowered in a single operation.
Maintenance
1. Cleaning
- Disconnect the drive from its power source before cleaning.
- Wipe the fabric with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- For dust, use a soft brush or vacuum cleaner with a brush attachment.
- The fabric is waterproof, dustproof, and mouldproof, making it easy to maintain.
2. Battery Charging
- The motor has a built-in lithium battery.
- When the remote control's red light flashes, it indicates a low battery.
- Connect the USB Type-C charging cable to the motor's charging port.
- The remote control's red light will be on during charging.
- When the remote control's green light is on, the battery is charged over 90%.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shade does not move or respond to remote. | Low battery in motor or remote; remote not paired; power disconnected. | Check remote battery (red light flashes for low battery). Charge motor battery. Re-pair remote if necessary (Quick Matching). Ensure power connection. |
| Shade stops at incorrect positions. | Upper or lower limits are not set correctly. | Re-set the upper and lower limits as per the 'Setting Limits' section. |
| Shade moves in the wrong direction. | Motor direction is reversed. | Follow the 'Motor Reversing' procedure to correct the direction. |
| Cannot control multiple shades with one remote. | Shades are not assigned to the same channel or remote. | Ensure all desired shades are paired to the same channel on the remote. Use 'Add a New Emitter' if using multiple remotes. |
| Smart home voice control not working. | Gateway not connected or configured correctly; incorrect voice commands. | Check gateway connection and configuration with your smart home assistant (Alexa/Google Home). Ensure correct voice commands are used. |
User Tips
- Accurate Measurement: For custom-made blinds, measure your windows precisely. For inside mounting, reduce 1 cm from the exact window width.
- Window Depth: If opting for inside mounting with a valance, ensure your window depth is over 5 cm to prevent the valance from protruding.
- Valance Recommendation: A valance (fabric insert & deluxe fabric-wrapped bottom rail) is highly recommended for a clean, upscale aesthetic and easier installation.
- Smart Home Integration: Fully utilize the smart features by connecting your blinds to Alexa or Google Home for convenient voice control and scheduling.
- Fabric Samples: If unsure about fabric choices, contact the seller for fabric samples to make informed decisions.
- Personalized Service: The seller often provides personalized consultation for custom orders, offering recommendations and support throughout the process.
Warranty and Support
For detailed warranty information, please refer to the official user manual (PDF) provided with your product. You can access the PDF at: Decopedia User Manual (PDF).
For any further assistance, customization inquiries, or technical support, please contact Decopedia customer service. They are available to help with any questions regarding your product.