LIDESENS LDS-GU10G-35W, LDS-GU10G-50W

Contents

LIDESENS GU10 Halogen Bulb User Manual

Models: LDS-GU10G-35W, LDS-GU10G-50W

1. Introduction

Thank you for purchasing the LIDESENS GU10 Halogen Bulb. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting product. Please read this manual thoroughly before use and retain it for future reference.

Three LIDESENS GU10 Halogen Bulbs
Figure 1: LIDESENS GU10 Halogen Bulbs (3-piece set)

2. Safety Information

  • WARNING: BE CAREFUL OF HIGH TEMPERATURE! Halogen bulbs can become extremely hot during operation and remain hot for some time after being switched off. Avoid touching the bulb when it is working or immediately after it has been switched off.
  • Always turn off the power supply before installing, removing, or cleaning the bulb.
  • Ensure the voltage of your electrical system matches the bulb's specified voltage (AC 100-130V). Incorrect voltage can damage the bulb or cause it to operate dimly.
  • Do not use in enclosed fixtures without proper ventilation, as this can shorten bulb life.
  • Keep away from flammable materials.

3. Installation

  1. Turn off Power: Before beginning installation, ensure the power to the fixture is completely turned off at the circuit breaker.
  2. Verify Voltage: Check that your electrical system's voltage is AC 100-130V. Using the wrong voltage (e.g., 220-240V) will cause the light to be very dim or fail.
  3. Insert Bulb: Align the two pins of the GU10 base with the corresponding holes in the GU10 socket. Push the bulb gently into the socket and twist clockwise until it is securely seated.
  4. Restore Power: Once the bulb is securely installed, restore power to the fixture.
Diagram showing GU10 bulb dimensions and base type compatibility
Figure 2: GU10 Base Compatibility and Dimensions. The MR16 GU10 Base can be used in GU10 & GZ10 Sockets. Dimensions are approximately 50mm (1.96in) diameter and 56mm (2.08in) height.
Diagram showing GU10 bulb dimensions: 50mm diameter, 48mm height
Figure 3: Detailed dimensions of the GU10 bulb, showing 50mm diameter and 48mm height.

4. Operation

Once installed, the LIDESENS GU10 Halogen Bulb operates like any standard light bulb. Simply use the wall switch or fixture control to turn the light on or off.

Applications

These GU10 halogen bulbs are suitable for a variety of indoor lighting applications, including:

  • Track Lights
  • Ceiling Lights
  • Recessed Lighting
  • Accent Lighting
  • Range Hoods
  • Down Lights
Examples of GU10 bulb applications in track lights, ceiling lights, recessed lighting, and accent lighting
Figure 4: Common applications for GU10 Halogen Bulbs.
Examples of GU10 bulbs used in track lighting and kitchen lighting setups
Figure 5: Installation examples in various indoor settings.
Diagram illustrating different light color temperatures: Warm White (2700-3000K), Natural White (4000-4500K), White (6000-6500K)
Figure 6: Light Color Temperature options for various lighting needs.

5. Maintenance

  • Cleaning: Ensure the bulb is completely cool and the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Replacement: When replacing a bulb, always ensure the power is off and the old bulb has cooled down. Follow the installation steps in Section 3.
  • Handling: Avoid touching the glass part of the bulb with bare hands during installation or replacement, as oils from your skin can create hot spots and reduce bulb life. Use a clean cloth or gloves.

6. Troubleshooting

  • Bulb does not light up:
    • Check if the power supply is on.
    • Ensure the bulb is correctly seated in the socket.
    • Verify that the fixture itself is working correctly.
    • Confirm the voltage of your electrical system is AC 100-130V. Incorrect voltage will prevent the bulb from lighting or cause it to fail prematurely.
    • Replace the bulb with a new one to rule out a faulty bulb.
  • Bulb is dim or flickers:
    • Check the voltage of your electrical system. A voltage outside the AC 100-130V range can cause dimming or flickering.
    • Ensure the bulb is fully inserted and making proper contact in the socket.
    • The bulb may be nearing the end of its lifespan.

7. Specifications

Feature Specification
Brand Name LIDESENS
Model LDS-GU10G-35W, LDS-GU10G-50W
Item Type Track Lighting (Bulb)
Base Type GU10
Power Consumption 35W, 50W
Light Source Halogen Bulb
Optical Flux 350-500LM (for 35W/50W)
Input Voltage AC 100-130V
Color Temperature (CCT) Warm White 2700K (also 3000~6000K options available)
Beam Angle 35°
CRI >90
Material Glass
Installation Method Self-contained / Embedded
Safety Protection Over-Current Protection, Short-Circuit Protection, Over-Voltage Protection, High Voltage Surges Protection
Size φ50x56mm (Diameter 50mm, Height 56mm)
Relevant Certificates CE, RoHS, SAA, FCC
Origin Mainland China
Various certification logos including CE, RoHS, SAA, FCC, ISO 9001
Figure 7: Product Certifications.

8. Warranty and Support

Warranty

LIDESENS provides a quality warranty for one year from the date of purchase. During this period, the product will be repaired free of charge for any manufacturing defects. All-life technical support is also available.

Contact Information

If you have any questions or require after-sales service, please contact us:

  • Email: sales@lidesens.com
  • Whatsapp: +0086-18033449799

9. User Tips

  • Check Compatibility: Always double-check the base type (GU10) and voltage (AC 100-130V) requirements of your fixture before purchasing and installing to ensure proper function and safety.
  • Consider Light Temperature: While these bulbs offer a warm white light, be aware that other color temperatures (Natural White, White) exist for different ambiance needs.

© 2024 LIDESENS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.