1. Introduction
Thank you for choosing the HYULIGHTS HYU-150B LED 200W Beam+Spot Moving Head Light. This professional moving head light is a powerful and versatile device designed for various stage, DJ, bar, and party applications. To ensure safe and proper operation, please read this user manual carefully before installation and use.
We recommend that installation and operation be carried out by certified technicians, and all instructions be followed strictly.
2. Safety Information
2.1. General Safety Cautions
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing.
Every person involved with the installation, operation, and maintenance of this device must be qualified and follow the instructions in this manual carefully.
Never stand directly beneath the unit when installing, removing, or servicing the light fixture from the ceiling or when setting it up on a flat, level surface. Ensure the fixture is at least 0.5m (1.5ft) away from any flammable objects (decorations, etc.).
3. Package Contents
Upon unpacking, please check carefully that there is no damage caused by transportation. Should there be any damage, please consult your dealer and do not install this device.
Inside the carton box, you should find:
- 1 x LED 200W Beam+Spot Moving Head Light
- 1 x Power Cable
- 1 x User Manual
- 1 x DMX Cable
- 1 x Bow Mount
- 2 x Screws for Bow Mount Installation

4. Setup and Installation
4.1. Mounting Points
Overhead installation requires extensive experience, including calculation of working load limits, in-depth knowledge of the installation materials used, and regular safety inspections of all installation materials and fixtures. If you lack these qualifications, do not attempt to install it yourself, as improper installation may result in personal injury.
For added protection, install fixtures outside walkways, seating areas, or areas where unauthorized persons may come into contact with fixtures. Before mounting the luminaire to any surface, ensure that the mounting area can withstand a minimum point load of 10 times the weight of the unit. Clamp installations must always be secured using secondary safety accessories such as appropriate safety cables.
4.2. Installation Bracket Kit Description
The bow mount and screws are provided for secure installation. Ensure the hook is properly fixed to the truss.




5. Technical Specifications
The HYU-150B LED Moving Head Light boasts impressive features for dynamic lighting effects:
- Voltage: AC110-240V 50-60HZ
- Light source: 1pcs 185W White High Power LED (Note: Product description mentions 250W, but technical parameters in manual state 185W. Please verify with seller if discrepancy is critical.)
- Total power: 200W (Note: Product description mentions 250W, but technical parameters in manual state 200W. Please verify with seller if discrepancy is critical.)
- Strobe: 25 times/sec
- Prism: 1pcs 24 rotating prisms (No Zoom)
- Beam angle: 1.5°
- Playing mode: Auto-running, Sound-activated, DMX512, master-slave
- Control channel: 12 channels
- Horizontal scan angle: 540°, speed can be controlled.
- Vertical scan angle: 220°, speed can be controlled.
- Color wheel: 11 colors + color rotating speed, infinite rotating
- Gobo wheel: 14 gobos + shake + Gobo Rotating speed, infinite rotating
- Dimmer: 0-100% with regulated constant color control
- Control panel: 4 Digital LED display figures
- Display board: LED display
- Net Weight (N.W): 5.5KG
- Gross Weight (G.W): 6.3 KG
- Packing size: 37.5 x 27 x 27.5 cm



6. Operating Instructions
6.1. DMX-512 Control Connection
Connect the supplied XLR cable to the 3-pin XLR female output of the controller and the other end to the 3-pin XLR male input of the moving head. You can chain multiple moving heads together via a serial link. The required cable should be a two-conductor shielded cable with XLR input and output connectors.
DMX Pin Configuration:
- Pin 1: Ground
- Pin 2: Data (-)
- Pin 3: Data (+)
If the keys are not operated for 5 seconds, the display will automatically return to the main menu. If there is a DMX signal, the red dot of the display will be flickering.
When connecting two or more units with a 3-pin signal line, set one light as Master to Show mode, and other lights as Slave Mode automatically. The DMX mode and Slave Mode address code will be invalid in this configuration.
6.2. Menu Function
The device features a 4-digit LED display and control buttons (MENU, UP, DOWN, ENTER) for setting various functions.
To set a function:
- Press the "MENU" button to switch functions.
- Press "UP/DOWN" to switch the function or set the address code.
- After switching, press the "ENTER" button to save the function.
Menu Settings Table:
| Setting | Value/Option | Description |
|---|---|---|
| Addr | 1-512 | Address settings |
| Chnd | 12 Channels | |
| SLnd | SI01 | Slave modes |
| Auto | Auto modes | |
| SHnd | Sound | Sound modes |
| Sh 0 | Show 1 | |
| Sh 1 | Show 2 | |
| Sh 2 | Show 3 | |
| Sh 3 | Show 4 | |
| Sens | 10-100 | Sound Sensitivity |
| Led | OFF | Screen off |
| ON | Screen on | |
| Disp | OFF | Screen is turned off |
| ON | Screen is turned on in reverse | |
| rPan | OFF | X reverse closed |
| ON | X reverse turn on | |
| rtil | OFF | Y reverse close |
| ON | Y reverse turn on | |
| Rest | YES | Reset |
| temp | XXX | Temperature display |
6.3. DMX Channels
The DMX channels allow for precise control over the light's functions. Below is a detailed breakdown of each channel and its corresponding values.
| Channel | Features | Value Range | Description |
|---|---|---|---|
| 1 | X | 0-255 | X position control |
| 2 | X Fine | 0-255 | Fine X position control |
| 3 | Y | 0-255 | Y position control |
| 4 | Y Fine | 0-255 | Fine Y position control |
| 5 | X Y Speed | 0-255 | Speed from fast to slow for X/Y movement |
| 6 | Dimming | 0-255 | Dimmer: 0-100% with regulated constant color control |
| 7 | Strobe | 0-10 | No function |
| 11-255 | Synchronous strobe speed from slow to fast (1HZ~25HZ) | ||
| 8 | Color | 0-9 | White light |
| 10-19 | Color 1 | ||
| 20-29 | Color 2 | ||
| 30-39 | Color 3 | ||
| 40-49 | Color 4 | ||
| 50-59 | Color 6 | ||
| 60-69 | Color 7 | ||
| 70-79 | Color 8 | ||
| 80-89 | Color 9 | ||
| 90-99 | Color 10 | ||
| 100-119 | Color 11 | ||
| 120-189 | Forward turn colors from fast to slow | ||
| 190-255 | Reverse colors from slow to fast | ||
| 9 | Gobo Wheel | 0-5 | White light |
| 6-10 | Gobo 1 | ||
| 11-15 | Gobo 2 | ||
| 16-20 | Gobo 3 | ||
| 21-25 | Gobo 4 | ||
| 26-30 | Gobo 5 | ||
| 31-35 | Gobo 6 | ||
| 36-40 | Gobo 7 | ||
| 41-45 | Gobo 8 | ||
| 46-50 | Gobo 9 | ||
| 51-55 | Gobo 10 | ||
| 56-60 | Gobo 11 | ||
| 61-65 | Gobo 12 | ||
| 66-70 | Gobo 13 | ||
| 71-75 | Gobo 14 | ||
| 76-80 | White light | ||
| 81-150 | Gobos Shake | ||
| 151-200 | Forward turn gobos from fast to slow | ||
| 201-255 | Reverse gobos from slow to fast | ||
| 10 | Prism | 0-127 | Off the prism |
| 128-135 | On the prism | ||
| 136-255 | Prism rotation from slow to fast | ||
| 11 | Macro Function | 0-29 | No function |
| 30-59 | Auto 1 | ||
| 60-89 | Auto 2 | ||
| 90-119 | Auto 3 | ||
| 120-149 | Auto 4 | ||
| 150-179 | Sound 1 | ||
| 180-209 | Sound 2 | ||
| 210-239 | Sound 3 | ||
| 240-255 | Sound 4 | ||
| 12 | Reset | 0-249 | No function |
| 250-255 | 3 seconds, enter the reset |
7. User Tips
- For optimal effects, consider pairing this moving head light with a fog machine.
- While the color wheel offers a good range of colors, be aware that the LED brightness might be perceived as less intense compared to some other 200W moving heads on the market.
8. Maintenance
Regular maintenance is crucial for the longevity and optimal performance of your moving head light. Always disconnect the power supply before performing any maintenance.
- Cleaning: Periodically clean the lenses and housing with a soft, lint-free cloth. Avoid using abrasive cleaners or solvents.
- Inspection: Regularly check all cables, connections, and mounting hardware for any signs of wear, damage, or looseness.
- Ventilation: Ensure that the ventilation openings are clear of dust and debris to prevent overheating.
9. Troubleshooting
If you encounter any issues with your HYU-150B moving head light, please refer to the following basic troubleshooting steps:
- No Power: Check the power cable connection, the power switch, and the fuse. Ensure the voltage supply matches the product's requirements.
- No DMX Control: Verify DMX cable connections, DMX address settings, and ensure the DMX controller is functioning correctly. Check for flickering red dot on the display, indicating DMX signal presence.
- Movement Issues: If the head is not moving or moving erratically, check the horizontal and vertical scan angle settings in the menu. Ensure no physical obstructions are present.
- Light Output Issues: Check dimmer settings and ensure the light source is functioning.
For more complex issues, please contact customer support or a qualified technician.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.