morayelec ME266P

Contents

Moray ME266P Digital Tire Pressure Gauge User Manual

1. Introduction

Thank you for choosing the Moray ME266P Digital Tire Pressure Gauge. This high-quality, battery-powered device is designed for accurate and easy measurement of tire pressure in various vehicles, including cars, trucks, and motorcycles. It features a high-definition LCD screen for clear readings, a durable rubber protective cover, and supports multiple pressure units.

Moray ME266P Digital Pressure Gauge with key features: 0.1PSI resolution, 1%FS accuracy, 2xAAA powered, multi-unit display, large screen.
Figure 1: Moray ME266P Digital Pressure Gauge Key Features

This manual provides essential information for the safe and effective use of your new digital pressure gauge. Please read it thoroughly before operation and keep it for future reference.

2. Safety Information

To ensure safe operation and prevent damage to the device, please observe the following precautions:

  • Use the device at room temperature. Avoid exposure to high temperatures, direct sunlight, and strong corrosive environments.
  • Ensure a tight fit when connecting the air nozzle to prevent inaccurate readings caused by air leakage.
  • When replacing batteries, confirm the correct direction of the positive and negative poles. Do not use rechargeable batteries to prevent short circuits.
  • Clean the equipment by wiping the surface with a dry cloth only. Do not rinse directly with water.
  • If the product is used in an area prone to thunderstorms, it is recommended to use a protection device and ensure reliable power grounding.
  • For any special requirements or concerns, please contact the manufacturer or seller.

3. Product Overview

The Moray ME266P Digital Tire Pressure Gauge is designed for user-friendly operation and durability. Key components include:

  • LCD Display: High-definition screen for clear pressure readings.
  • ON/OFF Button: Powers the device on and off, and cycles through units.
  • FUNC Button: Used for manual shutdown.
  • Copper Joint: Durable 1/4" NPT interface for connecting to tire valves.
  • Rubber Protective Sleeve: Provides anti-fall and anti-collision protection.
  • Battery Compartment: Houses two AAA batteries.
Diagram of Moray ME266P Digital Pressure Gauge components: LCD display, ON/OFF and FUNC buttons, copper joint, rubber protective sleeve, 2*AAA battery compartment.
Figure 2: Product Components and Controls

Watch this video for a visual demonstration of the product's features:

Video 1: Demonstration of the Moray ME266P Digital Pressure Gauge features, including LCD display clarity, unit switching, and battery compartment.

4. Setup

4.1 Battery Installation

  1. Locate the battery compartment on the back of the gauge.
  2. Open the battery cover.
  3. Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) poles are correctly aligned as indicated inside the compartment.
  4. Close the battery cover securely.

4.2 Initial Connection

The gauge is ready for use after battery installation. No complex calibration is typically required for initial setup.

5. Operation

5.1 Power ON/OFF

  • To Turn On: Press the "ON" button. The LCD screen will light up and display the current pressure unit.
  • To Turn Off Manually: Long press the "ON/FUNC" button.
  • Automatic Shutdown: The device will automatically shut down after a period of inactivity or when the air nozzle is disconnected.

5.2 Unit Switching

The gauge supports multiple pressure units. To switch between units:

  1. With the device powered on, press the "ON" button repeatedly.
  2. Each press will cycle through the available display units: PSI, bar, kPa, and kg/cm².
  3. Stop pressing when your desired unit is displayed.
Moray ME266P Digital Pressure Gauge displaying different units: PSI, BAR, KPA, KG/CM².
Figure 3: Unit Display Options

5.3 Taking a Tire Pressure Measurement

  1. Ensure the gauge is powered on and the desired unit is selected.
  2. Connect the copper connector of the tire pressure gauge tightly to the tire nozzle of the vehicle.
  3. Hold the connection firmly until the pressure reading stabilizes on the LCD screen.
  4. Read the tire pressure data displayed.
  5. Disconnect the gauge from the tire nozzle. The device will automatically shut down.
Moray ME266P Digital Pressure Gauge in use, measuring tire pressure on a vehicle wheel.
Figure 4: Measuring Tire Pressure

6. Maintenance

6.1 Cleaning

To clean the gauge, simply wipe the surface with a dry, soft cloth. Do not use liquid cleaners or immerse the device in water.

6.2 Battery Replacement

The LCD screen includes a built-in battery level display. When the battery level is low, replace the two AAA batteries promptly to ensure accurate readings and continuous operation. Always ensure correct polarity during replacement.

7. Troubleshooting

  • Inaccurate Readings: Ensure the copper connector is tightly fitted to the tire nozzle to prevent air leakage. Check battery level and replace if low.
  • Device Not Turning On: Check if the batteries are installed correctly with the right polarity. Replace batteries if they are depleted.
  • Display Issues: If the display is dim or flickering, replace the batteries.

8. Specifications

Feature Specification
Model Number ME266P
Brand Name morayelec
Product Name Digital Pressure Gauge
Dial Diameter 75mm (2 - 3.9 Inches)
Display Type DIGITAL (LCD)
Origin Mainland China
Measurement Range 0-250 PSI
Accuracy Class ±1%FS
Resolution 0.1 PSI
Display Units PSI, bar, kPa, kg/cm² (switchable)
Connection Thread 1/4" NPT (Supports customization)
Power Supply 2 x AAA batteries
Material Pure copper + ABS + PVC
Protection Level IP54
Application Suitable for tires of various vehicles (trucks, bicycles, cars)
Image showing various vehicles (bicycle, motorcycle, car, van) for which the Moray ME266P Digital Pressure Gauge is suitable.
Figure 5: Suitable for Various Vehicle Types
Comparison of Moray ME266P Digital Pressure Gauge with a traditional gauge, highlighting LED display, easy battery replacement, 0.1psi accuracy, and multi-unit switch.
Figure 6: Digital vs. Traditional Gauge Comparison

9. User Tips

  • This device is battery-powered and does not feature a charging port or rechargeable batteries. Ensure you have spare AAA batteries for uninterrupted use.
  • For optimal accuracy, always ensure the gauge is firmly and squarely attached to the tire valve to prevent any air leakage during measurement.

10. Warranty and Support

For detailed warranty information, service, or any special requirements not covered in this manual, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is also available for download: Moray ME266P User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.