1. Safety Instructions
To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring instructions may cause harm or damage.
WARNINGS
- Risk of Fire: This appliance uses a flammable refrigerant (R290). If refrigerant is leaked and exposed to an external ignition source, there is a risk of fire.
- Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
- The appliance shall be stored in a room without continuously operating ignition sources, for example open flames, an operating gas appliance or an operating electric heater.
- Do not pierce or burn.
- Be aware that refrigerants may not contain an odour.
- Appliance shall be installed, operated and stored in a room with a floor area larger than 4 m².
- The installation space of refrigerant pipeline should comply with national gas regulations.
- Keep ventilation openings clear of obstruction.
- The appliance shall be stored to prevent mechanical damage from occurring.
- Any person involved with working on or repairing refrigerating circuits should possess a valid certificate for handling refrigerants safely.
- Only maintain and repair the dehumidifier following manufacturer methods. If other technicians are required, supervision by persons qualified for handling R290 refrigerants is necessary.
- The appliance shall be stored in a well-ventilated area where the room size corresponds to the room area as specified for operation.
- All working procedures that affect safety means shall only be carried by competent persons.
- Do not use the dehumidifier where there may be flammable or corrosive gases nearby.
- Do not place the dehumidifier near a heat source to avoid deformation or fire.
- Do not repair, disassemble, modify or clean internal components yourself. Contact after-sales service.
- Do not poke fingers, sticks, or any other object into the air inlet or outlet.
- Do not operate or plug/unplug with wet hands.
- Do not clean directly with water or use in places where it may contact water.
- Do not place water containers on top of the dehumidifier.
- Unplug the dehumidifier before care and maintenance.
- This appliance contains only functional grounding connections.
- Do not exceed the rating of the electrical outlet or connection device.
- Do not modify power cord length or share the electrical outlet with other appliances.
- Do not drink or use the water drained from the dehumidifier.
- Do not take the water tank out during operation as the contact switch will not disconnect power.
- If you notice anything unusual (e.g., smell of burning), immediately unplug and contact after-sales service.
- Do not use the dehumidifier in a laundry room.
- If the temperature around the hose falls below zero, do not use continuous drainage.
- Do not drag the dehumidifier across a carpet.
- Place the dehumidifier on a stable, level surface.
- Clean the dehumidifier's air filter regularly.
- Do not place the dehumidifier against objects or walls. Maintain at least 20 cm clearance around and 50 cm above its air outlet.
- For optimal performance, operate in enclosed spaces.
- If water enters the dehumidifier, disconnect power and contact a qualified service technician.
- The dehumidifier shall be installed in accordance with national wiring regulations.
- Appliance with electric heater shall have at least 1 meter space to combustible materials.
- Contact authorized service technician for repair or maintenance.
- Do not use a loose or damaged electrical outlet.
- Do not use for functions other than those described in this manual.
- Contact authorized installer for installation.
- In a thunderstorm, disconnect power to avoid damage.
- Do not run the power cord under carpeting or cover it. Arrange cord away from traffic areas.
- Do not open the dehumidifier during operation.
- When removing the filter, do not touch metal parts.
- Hold the power plug when unplugging.
Important: After moving/unpacking the dehumidifier, leave it in its final location for at least 4 hours before plugging it into a power outlet/starting it.
CAUTIONS
- Do not climb or sit on the dehumidifier.
- Do not allow the dehumidifier to blow directly onto plants or animals.
- Do not place objects with open flames by the outlet.
- Do not block the air inlet or outlet.
- When not used for a long time, disconnect from electrical outlet, empty and dry the water tank, then store upright in a dry, well-ventilated place.
- The compressor must be kept upright. If tipped over or transported, stand upright for at least 4 hours before turning on.
- Do not use in small spaces; lack of ventilation can cause overheating.
- Do not use in areas where chemicals are handled.
- Do not place heavy objects on the power cord.
2. Product Overview
The XIAOMI MIJIA Smart Dehumidifier 13L is designed for efficient moisture removal and air purification in various indoor environments. It features a sleek design with intuitive controls and smart connectivity.
Key Features
- High Dehumidification Capacity: 13L/day (at 30°C/80% RH) for quick moisture removal.
- Large Water Tank: 3L capacity reduces the frequency of emptying.
- Versatile Dehumidification Modes: Smart Mode, Sleep Mode, and Clothes Drying Mode.
- Quiet Operation: Optimized for low noise, as low as 34.1 dB(A).
- Smart Connectivity: Control and monitor via the Mi Home/Xiaomi Home app.
- Safety Features: Incorporates 12 meticulously engineered safety features.
- Antibacterial Filter: Helps maintain air quality.
- Concealed Caster Wheels: For smooth movement without scratching floors.
- Automatic Drying upon Shutdown: Minimizes bacterial growth.
Product Components
Refer to the diagram below for an illustration of the main components and controls.
- Display & Buttons: Top-mounted touch controls for easy use, including real-time humidity display.
- Air Outlet Grille: Located at the top.
- Air Inlet Grille: Located on the sides.
- Water Tank: Removable 3L tank at the bottom.
- Drainage Hose Connection: For continuous drainage.
- Caster Wheels: Concealed at the base for mobility.
- Indicators: Wi-Fi Indicator, Water Full Indicator, Timer Indicator, Child Lock Indicator.
- Buttons: On/Standby, Timer, Mode, Humidity Setting.
3. Setup
Unpacking and Placement
- Carefully remove the dehumidifier from its packaging.
- Place the dehumidifier on a stable, level surface.
- Ensure there is at least 20 cm of clearance around the dehumidifier and at least 50 cm above its air outlet for optimal performance.
- After moving or unpacking, allow the dehumidifier to stand upright for at least 4 hours before plugging it in.
Power Connection
- Ensure the rated voltage (220V) matches your power supply.
- Plug the dehumidifier into a properly grounded wall socket. The power cord is equipped with a three-pronged grounding plug.
- Do not use extension cords or power adapters unless they are approved for dehumidifiers.
- Ensure the electrical outlet is accessible after installation.
Continuous Drainage Setup (Optional)
For continuous drainage, you can connect a drainage hose to the dehumidifier's water outlet.
- Pull out the water tank horizontally.
- Remove the baffle board from the water tank, and keep it properly to avoid loss.
- Connect the drainage hose to the water outlet.
- Reinstall the water tank and connect the other end of the drainage hose to a drainage point.
Note: When draining off water, make sure the end of the drainage hose is lower than the dehumidifier's water outlet, and the hose hangs down smoothly without being wavy and not overly bent.
4. Operating Instructions
Turning On/Off
- Turning On: Plug in the dehumidifier and press the Power button (
) to turn it on. - Turning Off: Unplug the dehumidifier to turn it off.
- Standby Mode: When the dehumidifier is on, press the Power button to enter standby mode. The dehumidifier will dry for 40 minutes before entering standby mode to reduce moisture inside. This function is enabled by default and can be disabled in the app.
Switching Modes
When the dehumidifier is on, press the Mode button (
) to cycle through the modes:
- Smart Mode: Automatically adjusts settings and fan speed based on room humidity and your set target humidity.
- Sleep Mode: Starts and stops automatically at a low speed based on room humidity and your set target humidity.
- Clothes Drying Mode: Runs at high speed for powerful dehumidifying. Humidity cannot be set manually. If it operates for 8 hours, the expected humidity changes to 50%. For optimal drying, spin-dry clothes first, then dry in an enclosed room.
Note: The dehumidifier operates with low noise, so there is no significant difference in noise levels between modes.
Setting Expected Humidity
When the dehumidifier is on, press the Humidity Setting button (
) to cycle through expected humidity levels: 40%, 45%, 50%, 55%, 60%, 65%, and 70%.
Scheduling Standby Time
- When the dehumidifier is on, press the Timer button (
) to schedule standby time. The settable range is 1-12 hours. - If no operation for 5 seconds after selecting the desired standby time, the setting will take effect and the timer icon will appear on the display.
Child Lock Function
Press and hold the Power and Mode buttons simultaneously for 3 seconds to enable or disable the child lock. When enabled, the display will show the child lock icon, and the dehumidifier will not respond to button operations.
Water Full Alert
If the water tank is full or improperly installed, the dehumidifier will beep 3 times, and the water full indicator will blink continuously. All buttons except Power will be disabled. Once the water level returns to normal and the tank is secured, the indicator will turn off, and normal operation resumes.
Note: If a water full alert occurs, pour out some water from the water tank and reinstall it properly.
Defrosting
The dehumidifier automatically defrosts if its evaporator and condenser are covered by frost (below 15°C). The compressor stops, and the fan runs until defrosting is complete. During defrosting, the defrost icon blinks slowly. After defrosting, the mode icon that was running before defrosting will light on, and normal operation resumes.
Wi-Fi Connectivity (Mi Home/Xiaomi Home App)
The dehumidifier can be controlled via the Mi Home/Xiaomi Home app. To connect:
- Scan the QR code below or search for "Mi Home/Xiaomi Home" in your app store to download and install the app.
- Open the app, tap "+" on the upper right, and follow the instructions to add your device.
Note: The app is referred to as Xiaomi Home app in Europe (except for Russia). The name displayed on your device should be taken as the default. The app version might be updated, so follow current app instructions.
Wi-Fi Status Description
| Wi-Fi Indicator | Description |
|---|---|
| Blinks slowly | Awaiting connection |
| Blinks quickly | Connecting |
| Remains on | Connected |
Resetting Wi-Fi
Press and hold the Power and Humidity Setting buttons simultaneously for 7 seconds to reset the Wi-Fi connection.
5. Care & Maintenance
Maintenance Precautions
- Before cleaning, disconnect the dehumidifier from power.
- Do not rinse or submerge the dehumidifier in liquid.
- Do not use volatile liquids (e.g., thinner, gasoline) to wipe the dehumidifier. Use a wet cloth with neutral detergent, then a soft dry cloth.
- Clean the filter regularly to avoid performance reduction due to dust buildup. Clean more frequently in dusty environments.
- After removing the filter, do not touch the finned parts inside the dehumidifier.
Cleaning the Dehumidifier Exterior
Soak a cloth in water below 45°C, wring it out, and gently wipe over the dirty area.
Cleaning the Air Filter
- Remove the air inlet grille by pulling it out from the bottom, then take out the filter inside the grille.
- Rinse the filter and air inlet grille with water or use a vacuum cleaner. For particularly dirty filters (e.g., with oil stains), use warm water (below 45°C) with neutral detergent, then dry in a cool place.
- Reinstall the filter and the air inlet grille in order. Ensure the triangle icon on the grille is facing up.
Cleaning the Water Tank
Remove the water tank, clean it thoroughly, and put it back after fully drying it.
Long-term Storage
- Let the dehumidifier sit for two days after entering standby mode, then unplug it.
- Clean the dehumidifier, water tank, and filter.
- Coil up the power cord and secure it with a cable tie.
- Store the dehumidifier in its original packaging (recommended).
- Store the dehumidifier upright in a dry and well-ventilated place.
6. Troubleshooting
Common Issues and Solutions
| Issue | Cause and Solution |
|---|---|
| Dehumidifier shakes or makes unusual sounds when starting/operating. | This is normal due to compressor start/stop. Ensure the dehumidifier is on a flat surface. Check if the filter is blocked. Refrigerant may make sound when compressor is on. |
| Dehumidifier does not work well. | Ensure room temperature is 5°C to 35°C. Check if humidity is set appropriately. Clean blocked air inlet/outlet. Close doors/windows and turn off other ventilation. |
| Dehumidifier cannot work. | Check for power failure, loose power plug, full/improperly installed water tank, or if timer function is active. |
| Dehumidifier leaks water. | Check if the drainage hose is loose or if the drainage system is blocked. |
| Black stains appear in the water tank. | Caused by air dust and materials from evaporator/condenser. This is normal. Wipe with a paper towel; stains will decrease with continued use. |
Common Error Codes
Error codes will appear on the dehumidifier's display.
| Code | Description | Solution |
|---|---|---|
| C2 | Fan error | Turn off for 5 minutes, then turn on again. If persistent, contact after-sales service. |
| C3 | Communication error between display and motherboard | Disconnect from electrical outlet, then reconnect. If persistent, contact after-sales service. |
| E1 | Pipe temperature sensor error | Turn off for 5 minutes, then turn on again. If persistent, contact after-sales service. |
| E9 | Humidity sensor error | Turn off for 5 minutes, then turn on again. If persistent, contact after-sales service. |
| H2 | Overload protection | Check if air inlet/outlet is blocked. Turn on again; if persistent, contact after-sales service. |
| H6 | Fluoride deficiency protection | Turn off for 5 minutes, then turn on again. If persistent, contact after-sales service. |
| H8 | Overheating protection | Ensure working temperature is between 5°C and 35°C. If persistent, contact after-sales service. |
7. Specifications
The dehumidifier's capacity is measured at calibrated ambient temperature and humidity. Results may vary due to actual operating conditions. The operating temperature range is 5°C to 35°C. If the indoor temperature is out of this range, the dehumidifier may not be able to work. If specifications change, details on the dehumidifier's nameplate shall prevail without notice.
| Attribute | Value |
|---|---|
| Brand Name | XIAOMI |
| Model Number | DM-CS13BFA5A |
| Type | Desiccant Dehumidifier |
| Rated Voltage | 220 V |
| Rated Frequency | 50 Hz |
| Power (W) | 250w |
| Maximum Input Current | 1.52 A |
| Capacity (pints / 24h) | 13L |
| Dehumidification Volume | 1.1L/h-3L/h (13 L/D at 30°C/80% RH) |
| Water Tank Capacity (l) | 3.0 L |
| Refrigerant | R290/0.038 kg |
| Noise | ≤38 dB(A) |
| Net Weight | 11.1 kg |
| Air Flow Rate | 140 m³/h |
| Item Dimensions | Φ290 × 520 mm |
| Working Temperature Range | 5°C-35°C |
| Fuse | 3.15 A/250 V |
| Power Cord | 3 × 0.75 mm² |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4 GHz |
| Certification | CE |
| Origin | Mainland China |
8. User Tips
- Initial Operation: After receiving, allow the unit to settle for a few hours before plugging it in, especially if it has been transported horizontally.
- Voltage Compatibility: This Chinese version unit operates on 220V. If your region uses 110V, a step-up voltage transformer is required for operation.
- Long-term Effectiveness: Consistent use over several months has shown to effectively reduce mold and dampness.
- Packaging: The product is typically well-packaged for secure delivery. Inspect for any minor cosmetic damage upon arrival.
9. Frequently Asked Questions (FAQ)
- Q: Is there any warranty with the purchase?
- A: Yes, XIAOMI provides a limited product warranty. For specific details on duration and conditions, please refer to the Warranty section of this manual or visit the official Xiaomi website.
10. Warranty & Support
Limited Product Warranty
XIAOMI warrants that the Products are free from defects in materials and workmanship under normal use and in accordance with the respective Product user manual, during the Warranty Period. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about consumer warranty benefits, refer to Xiaomi's official website https://www.mi.com/global/support/warranty.
Xiaomi does not guarantee uninterrupted or error-free operation and is not liable for damages arising from non-compliance with instructions.
Remedies
If a hardware defect is found and a valid claim is received within the Warranty Period, Xiaomi will either (1) repair the product at no charge, (2) replace the product, or (3) refund the Product, excluding potential shipping costs.
How to Obtain Warranty Service
To obtain warranty service, you must deliver the Product, in its original packaging or similar packaging providing an equal degree of Product protection, to the address specified by Xiaomi. You may be required to present proofs of purchase and/or comply with registration requirements.
Exclusions and Limitations
The Limited Warranty does not apply to:
- Damage due to acts of nature or God (e.g., lightning, flood, fire).
- Negligence, commercial use, alterations, or modifications.
- Damage caused by use with non-Xiaomi products.
- Damage caused by accident, abuse, or misuse.
- Damage caused by operating outside permitted uses or with improper voltage/power supply.
- Damage caused by service (including upgrades and expansions) performed by non-Xiaomi representatives.
It is your responsibility to back up any data, software, or other materials. Xiaomi is not responsible for data loss during service. No Xiaomi reseller, agent, or employee is authorized to modify this warranty.
Xiaomi Contacts
For customer support, please visit the website: https://www.mi.com/global/support/warranty. The contact person for after-sales service may be any person in Xiaomi's authorized service network, distributors, or the final vendor.
Regulatory Compliance Information
Europe - EU Declaration of Conformity
Zhuhai Sanyou Environmental Technology Co., Ltd. declares that the radio equipment type DM-CS13BFA5B is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at http://www.mi.com/global/service/support/declaration.html.
The product is also in compliance with UK PSTI regulations; the full text of declaration of conformity is available at https://www.mi.com/global/service/support/declaration.html.
Disposal and Recycling Information
All products bearing the WEEE symbol (waste electrical and electronic equipment, as in directive 2012/19/EU) should not be mixed with unsorted household waste. Instead, dispose of waste equipment at a designated collection point for recycling, appointed by the government or local authorities. Correct disposal and recycling help prevent potential negative consequences to the environment and human health. Contact the installer or local authorities for more information.