ANYFAR Wireless CarPlay Android Auto Box

Contents

Wireless CarPlay Android Auto Box User Manual

For BMW NBT CIC Systems

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your Wireless CarPlay Android Auto Box. This device integrates advanced smartphone functionalities into your BMW's original NBT or CIC system, enhancing your driving experience without altering the factory display.

1.1 Functional Overview

  • CarPlay / Android Auto: Seamlessly integrate your iPhone or Android device for navigation, music, calls, and more. Supports both wireless and wired connections, with voice control via Siri or Google Assistant.
  • Reversing Video Input: The smart module decodes video signals, allowing for the integration of rear-view cameras.
  • Mirroring: Supports wired and wireless screen mirroring for both iPhone (AirPlay) and Android phones (AutoLink), displaying your phone's content directly on the car screen.
  • USB Video Playback: Play video and audio media directly from a USB disk.
Wireless CarPlay Android Auto Box Product Overview

Figure 1: Wireless CarPlay Android Auto Box with key features.

2. Setup and Installation

2.1 Kit Contents

Please verify that all the following items are included in your package:

  • CarPlay Decoder Box
  • Power Cable Harness
  • LVDS Cable
  • WiFi Antenna
  • USB-AV Cable
  • Microphone (Mic) Cable

2.2 Compatibility

This system is compatible with various BMW models and series. Please check the table below to confirm your vehicle's compatibility.

Suitable BMW Models and Years

Figure 2: Compatible BMW Models and Production Years.

2.3 Toggle Switch (DIP Switch) Setup

The CarPlay decoder box features DIP switches that must be configured according to your car's screen size. Incorrect settings may lead to display issues.

  1. Locate the DIP Switches: The toggle switches are located on the side of the CarPlay decoder box, usually near the LVDS ports.
  2. Identify Your Screen Size: Determine if your BMW has a 6.5-inch screen or an 8.8/10.2-inch screen.
  3. Set the Switches: Adjust the switches according to the following configurations:
Screen SizeDIP Switch Settings (1-8)
6.5 inch screenRefer to the 'dial setup 2' diagram in the PDF manual. Typically, switches 1, 2, 3, 4, 5, 6, 7, 8 are set to specific ON/OFF positions.
8.8 / 10.2 inch screenRefer to the 'dial setup 2' diagram in the PDF manual. Typically, switches 1, 2, 3, 4, 5, 6, 7, 8 are set to specific ON/OFF positions.

2.4 Cable Connection

Follow the wiring diagram carefully. Incorrect connections can damage the unit or prevent proper functionality.

Detailed Wiring Diagram for CarPlay Box

Figure 3: Comprehensive wiring diagram connecting the CarPlay box to OEM components.

  1. LVDS Cable Connection:
    a. The ORIGINAL LVDS cable from your BMW's Head Unit connects to the "LVDS IN" port on the CarPlay box.
    b. The NEW LVDS cable (provided) connects from the "LVDS OUT" port on the CarPlay box to your car's SCREEN.
    Note: Connecting LVDS cables incorrectly will result in a black screen.
  2. Power Cable Harness: Connect the provided power cable harness to the CarPlay box and integrate it with your car's existing wiring as per the diagram.
  3. USB-AV Cable: Connect the USB-AV cable to the CarPlay box. This provides USB connectivity for media playback and potentially wired CarPlay/Android Auto.
  4. WiFi Antenna: Screw the WiFi antenna onto the designated port on the CarPlay box. This is crucial for wireless CarPlay, Android Auto, and mirroring functions.
  5. Microphone (Mic) Cable: Connect the external microphone to the CarPlay box for improved call quality and voice command accuracy.

2.5 Installation Location

The CarPlay interface decoder box should be installed in an appropriate space near, or on, the OEM head unit. Ensure it is secured and does not interfere with other vehicle components.

3. Operating Instructions

3.1 Switching Between Original and CarPlay Systems

After all cables are connected, you can switch between your original BMW interface and the CarPlay interface by long-pressing the "MENU" button on your iDrive knob.

3.2 Wireless CarPlay Connection

  1. On your CarPlay box interface, navigate to "SmartPhone Setting" and ensure "CarPlay" is ON.
  2. On your iPhone, go to Settings > Bluetooth.
  3. Search for a device named "CAR-xxxx" (where xxxx is a unique identifier) and select it to pair.
  4. Confirm the pairing request on both your iPhone and the car screen.
  5. Once paired via Bluetooth, your iPhone will automatically connect to the CarPlay box's WiFi for wireless CarPlay functionality.

3.3 Apple Wireless Screen Mirroring (AirPlay)

  1. On your CarPlay box interface, navigate to "SmartPhone Setting" and ensure "AirPlay" is ON.
  2. On your iPhone, go to Settings > Wi-Fi.
  3. Connect to the Wi-Fi network named "CAR-WIFI-XXXX". The default password is 66668888.
  4. Once connected, open the Control Center on your iPhone, tap "Screen Mirroring", and select the CarPlay device to start mirroring.

3.4 Wireless Android Auto Connection

  1. On your CarPlay box interface, navigate to "SmartPhone Setting" and ensure "AndroidAuto" is ON.
  2. On your Android phone, go to Settings > Bluetooth.
  3. Search for a device named "CAR-xxxx" and select it to pair.
  4. Confirm the pairing request.
  5. Once Bluetooth is paired, open the Android Auto app on your phone. The system should automatically connect.
  1. On your CarPlay box interface, navigate to "SmartPhone Setting" and ensure "AutoLink" is ON.
  2. On your Android phone, scan the QR code displayed on the car screen (or search online) to download and install the AutoLink app.
  3. Open the AutoLink app on your phone. It will search for available devices.
  4. Connect to the Wi-Fi network named "CAR-WIFI-XXXX".
  5. Once connected, tap "START NOW" on your phone to begin mirroring.
  6. Ensure your phone's media sound is connected via Bluetooth for audio output.

3.6 Steering Wheel Control Buttons

The CarPlay interface decoder box supports the following original steering wheel controls:

  • Voice control button
  • Telephone (answer/end call) button
  • Next song / Previous song buttons
  • Volume "+" and "-" buttons

Other steering wheel buttons are generally not supported by the CarPlay system.

4. Audio Settings

4.1 AUX Connections and Settings

For audio output from the CarPlay system, your BMW's original audio input must be set to AUX.

  1. AUX Cable: There is no need to connect the EXT-AUX cable to your car's AUX port unless your car is a BMW 3/4 series or a 1/2 series.
  2. BMW System Settings:
    a. On your original BMW system, navigate to the "Multimedia" menu.
    b. Select "External devices".
    c. Choose "AUX front" to activate it.
    d. Keep this setting active for CarPlay audio.

4.2 Call Echo Cancellation

If you experience echo during phone calls, perform the following steps:

  1. On the CarPlay interface, go to Settings > Audio > AEC Delay.
  2. Click the "Start Auto AEC" button.
  3. Ensure the car interior is quiet.
  4. Set the volume to a moderate position.
  5. Wait approximately 20 seconds for the estimation process to complete.

5. Maintenance

The CarPlay decoder box requires minimal maintenance. Keep the unit clean and free from dust. Avoid exposing it to extreme temperatures or moisture. Do not attempt to open or repair the unit yourself, as this will void the warranty.

6. Troubleshooting

ProblemPossible Cause / Solution
Black Screen after installationIncorrect LVDS cable connection. Ensure the original LVDS cable goes to "LVDS IN" and the new LVDS cable goes from "LVDS OUT" to the screen.
No Sound from CarPlay/Android AutoYour BMW's original audio input is not set to AUX. Navigate to Multimedia > External devices > AUX front in your BMW system.
Echo during phone callsPerform the Call Echo Cancellation procedure described in Section 4.2.
Wireless connection issuesEnsure the WiFi antenna is securely connected. Check Bluetooth pairing and WiFi connection steps carefully. Restart both the phone and the car system.
Steering wheel controls not workingOnly specific buttons are supported (voice, phone, track, volume). Refer to Section 3.6.

If problems persist, please gather the information listed in the "Warranty/Support" section and contact customer support.

7. Specifications

  • Brand: ANYFAR
  • Compatibility: BMW NBT CIC Systems (1, 2, 3, 4, 5, 6, 7 Series, X1, X3, X4, X5, X6, MINI - specific models and years as per compatibility chart).
  • Functions: Wireless/Wired CarPlay, Wireless/Wired Android Auto, Mirroring (AirPlay, AutoLink), USB Video Playback, Reversing Video Input.
  • Control: Utilizes original car iDrive knob and supported steering wheel controls.
  • Origin: Mainland China

8. User Tips

  • Verify Compatibility: Always double-check your BMW's model, year, and system (NBT/CIC) against the provided compatibility list before installation to ensure proper functionality.
  • LVDS Connection is Key: Pay close attention to the LVDS cable connections. Incorrect wiring is a common cause of a black screen.
  • Set AUX for Audio: Remember to switch your car's audio input to AUX in the BMW system settings to hear sound from the CarPlay/Android Auto box.
  • Secure Connections: Ensure all cable connections are firm and secure to prevent intermittent issues.

9. Warranty and Support

For technical support or warranty claims, please contact your seller or the manufacturer. To expedite the support process, please be prepared to provide the following information:

  1. Your order ID.
  2. Your car's model.
  3. The year of your car.
  4. The screen size of your car (e.g., 6.5-inch, 8.8-inch).
  5. Details of your toggle switch setup.
  6. Pictures of your LVDS cable connections.
  7. The software version of your CarPlay decoder box (found in the CarPlay decoder menu: Settings > System Version).

For further detailed diagrams and instructions, please refer to the official user manual PDF provided by the seller.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.