SUNMEIYI Bedside Indoor LED Wall Lamp

Contents

SUNMEIYI Bedside Indoor LED Wall Lamp Instruction Manual

Model: Bedside Indoor LED Wall Lamp

1. Product Overview

Thank you for purchasing the SUNMEIYI Bedside Indoor LED Wall Lamp. This modern wall-mounted fixture is designed to provide ambient lighting for various indoor spaces such as bedrooms, living rooms, dining rooms, foyers, studies, and bathrooms. It features a sleek design with an iron body and a plastic or glass shade, compatible with G9 base LED bulbs.

Two SUNMEIYI wall lamps, one gold and one black, mounted on a wall above a chair.

Figure 1: SUNMEIYI Wall Lamps in a living room setting.

2. Safety Instructions

Please read all safety instructions carefully before installation and use. Keep this manual for future reference.

  • Always wear gloves during installation to protect your hands and the lamp's finish.
  • Do not power on the electrical supply before the lamp is fully and securely installed.
  • Always cut off the main power supply at the circuit breaker before cleaning, performing maintenance, or replacing the bulb.
  • Use only non-corrosive cleaning agents to clean the lamp.
  • Ensure the installation surface is sturdy enough to support the lamp's weight.
  • This product is for indoor use only.

For detailed multi-language safety instructions, please refer to the user manual PDF available from the seller.

3. Setup and Installation

3.1 Package Contents

  • Wall Lamp Fixture (Body and Shade)
  • Mounting Hardware (screws, wall anchors)
  • Instruction Manual (this document)

Note: G9 LED bulb is NOT included and must be purchased separately.

3.2 Tools Required (Not Included)

  • Screwdriver (Phillips head recommended)
  • Drill (if wall anchors are needed)
  • Pencil for marking
  • Wire strippers (if necessary for wiring)
  • Electrical tape (optional)

3.3 Installation Steps

  1. Turn off Power: Before starting, ensure the power supply to the installation area is turned OFF at the main circuit breaker.
  2. Prepare Mounting Location: Choose a suitable location on the wall. Mark the positions for drilling holes using the lamp's mounting bracket as a template.
  3. Install Mounting Bracket: Drill holes if necessary and secure the mounting bracket to the wall using the provided screws and wall anchors.
  4. Electrical Connection: Carefully connect the lamp's wires to your household electrical wires. Typically, this involves connecting live to live (black to black), neutral to neutral (white to white), and ground to ground (green or bare copper to green or bare copper). Ensure all connections are secure.
  5. Mount the Fixture: Carefully align the lamp fixture with the mounting bracket and secure it in place with the provided screws.
  6. Install G9 Bulb: Gently insert a G9 base LED bulb (max 9W recommended) into the lamp's socket. Ensure it is seated correctly.
  7. Attach Shade: Secure the plastic or glass shade to the fixture according to its design.
  8. Restore Power: Once the lamp is fully assembled and secured, turn the power supply back ON at the main circuit breaker.
  9. Test Lamp: Turn on the light switch to ensure the lamp functions correctly.
Dimensions of the B-Black variant of the wall lamp, showing a height of 25cm (9.84in) and a width of 8cm (3.15in) for the ball light, and a base width of 9.5cm (3.74in).

Figure 2: Example dimensions for B-Black variant. Other variants may differ.

4. Operating Instructions

The SUNMEIYI LED Wall Lamp is designed for simple operation:

  • Once installed and powered, the lamp is controlled by your standard wall light switch.
  • Flip the switch to turn the light ON or OFF.
  • This lamp is NOT dimmable. Do not connect it to a dimmer switch, as this may damage the lamp or the bulb.

5. Maintenance

5.1 Cleaning

  1. Turn off Power: Always turn off the power supply at the circuit breaker before cleaning.
  2. Wipe Down: Use a soft, dry, or slightly damp cloth to wipe the lamp fixture.
  3. Cleaning Agents: Use only non-corrosive, mild cleaning agents if necessary. Avoid abrasive cleaners, solvents, or harsh chemicals, as they can damage the finish.
  4. Dry Thoroughly: Ensure the lamp is completely dry before restoring power.

5.2 Bulb Replacement

  1. Turn off Power: Turn off the power supply at the circuit breaker and allow the bulb to cool completely.
  2. Remove Shade: Carefully remove the lamp shade to access the bulb.
  3. Remove Old Bulb: Gently pull out the old G9 bulb from its socket.
  4. Insert New Bulb: Insert a new G9 LED bulb (max 9W) into the socket, ensuring it is fully seated.
  5. Reattach Shade: Securely reattach the lamp shade.
  6. Restore Power: Turn the power supply back on at the circuit breaker.

6. Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn onNo power supplyCheck circuit breaker and wall switch.
Bulb is faulty or not installed correctlyReplace bulb or ensure it is fully seated in the socket.
Loose wiring connectionTurn off power, check and secure all wiring connections. If unsure, consult a qualified electrician.
Light flickersLoose bulb or faulty bulbEnsure bulb is tight. Replace bulb if flickering persists.
Incompatible dimmer switchThis lamp is not dimmable. Remove any dimmer switch and replace with a standard ON/OFF switch.

7. Specifications

FeatureSpecification
BrandSUNMEIYI
Item TypeWall Lamps
StyleModern Style
UseDaily Lighting
ApplicationKitchen, Dining Room, Bed Room, Foyer, Study, Bathroom
Luminous Flux2000-82000 (depending on bulb)
Lighting Area5-10 square meters
Number of Light Sources1
Shade TypePlastic / Glass
Base TypeG9
Power SourceAC
Light SourceLED (bulb not included)
Body MaterialIron
Voltage90 - 260 V
Is DimmableNo
Installation TypeWall Mounted
Installation MethodSelf-contained
CertificationCE, EMC, LVD
Package Length28 cm
Package Width16 cm
Package Height12 cm
Package Weight0.5 kg

8. User Tips

  • Mounting Orientation: While typically shown mounted vertically, some users may wish to mount the lamp horizontally. Please ensure the mounting mechanism can safely support the lamp in your desired orientation and that the light distribution meets your needs. Always check the stability of the fixture after mounting.
  • Bulb Choice: Since the bulb is not included, consider purchasing a G9 LED bulb with a color temperature (e.g., warm white, cool white) that best suits the ambiance of your room.

9. Warranty and Support

For warranty information, returns, or technical support, please contact the seller directly through your purchase platform. Keep your order details and proof of purchase handy when contacting support.

© 2024 SUNMEIYI. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.