Introduction
Thank you for choosing the HMG Android Radio 10.25 Multimedia Player. This manual provides comprehensive instructions on the basic functions, usage, and precautions for your car navigation audio and video product. Please read this manual carefully before use to ensure a smooth and enjoyable experience.
1. Setup and Installation
1.1 Package Contents
Before installation, please ensure all components are present:
1.2 Initial Boot and Shutdown
| Action | Description |
|---|---|
| Boot | Insert the car key, turn on ACC power. The device will automatically boot and display the boot LOGO animation. |
| Shutdown | After removing the car key and turning off ACC power, the device will automatically shut down. |
1.3 Wiring and Connections
The unit is designed for a lossless, pin-to-pin connection, compatible with original car functions like steering wheel buttons, vehicle radar, and door information.
1.3.1 Interface Annotation
Refer to the diagram below for the pin definitions of the wiring harness.
- 1: GND
- 2: ACC
- 3: BACK (Reversing signal)
- 4: KEY1 (Steering wheel control 1)
- 5: FR- (Front Right Speaker Negative)
- 6: FR+ (Front Right Speaker Positive)
- 7: FL- (Front Left Speaker Negative)
- 8: FL+ (Front Left Speaker Positive)
- 9: B+ (Battery Positive)
- 10: ILL (Illumination)
- 11: KEY2 (Steering wheel control 2)
- 12: ANT-12V (Antenna 12V)
- 13: RL- (Rear Left Speaker Negative)
- 14: RL+ (Rear Left Speaker Positive)
- 15: RR- (Rear Right Speaker Negative)
- 16: RR+ (Rear Right Speaker Positive)
- 4-Pin USB: For USB connection.
- 6-Pin USB: For USB connection (Canbus).
- GPS Antenna: Connect the GPS antenna for navigation.
1.3.2 Rear Camera Connection
There are two methods to connect the rear camera:
Method 1: Direct Connection
- Connect the camera's power cable to the reversing power cable of the original car.
- Connect the positive pole of the reverse light to the positive pole of the original car's reverse light.
- Connect the negative pole of the reverse light to the negative pole of the original car's reverse light.
Method 2: Using the Reversing Signal Cable
- Connect the camera's power cable to the reversing power cable of the original car.
- Connect the pink or brown reversing signal cable (BACK, pin 3) from the harness to the reversing power cable.
1.4 Map Installation (Offline Data)
- Copy the map package and APK file to an SD card or USB flash drive.
- On the head unit, click the application icon to enter the application interface.
- Open [File Manager]. The left directory will show the USB disk path.
- Navigate to the USB disk, select the map data package and APK, then click [Copy] in the lower left corner.
- Switch to the "Local" directory and click [Paste] in the lower left corner. The copy process may take approximately 10 minutes.
- After copying, click on the map APK to install it.
1.5 Navigation Path Selection
After installing the map APK, you need to associate it with the navigation icon on the main interface:
- Go to Settings > Car Settings > General > Set the associated navigation program.
1.6 CAN Protocol Configuration
For models with CAN protocol, you may need to configure the car type:
- Go to Settings > Car Settings > Factory (password: 000000) > CarType Setting.
- Choose the corresponding car information and click OK to save.
2. Operating Instructions
2.1 Main Interface and Application Interface
The device features a multi-page screen. Swipe left or right to switch between pages. Click the application icon on the main interface to access the full application list.
2.2 Status Bar and Drop-Down Menu
The status bar provides quick access to common functions and notifications. Swipe down from the top of the screen to reveal the drop-down menu for quick settings like Wi-Fi, screen off, and mute.
2.3 Wallpaper Replacement
You can personalize your device's appearance:
- Go to Settings > Car Settings > Display > Wallpaper.
- Choose your preferred wallpaper source.
2.4 Navigation Function
Access the navigation function by clicking the navigation icon on the main interface or in the application list. The unit supports high-precision GPS with voice navigation, offline map support, and online 3D map navigation.
To enable navigation on startup:
- Go to Settings > Car Settings > Factory (password: 000000) > Startup Navigator.
2.5 Radio Function
Click the radio icon on the main interface or application list to access the radio interface. You can search for stations, switch between FM1/FM2, and adjust frequency stepping.
2.6 Bluetooth Function
Click the Bluetooth icon to enter the Bluetooth interface.
2.6.1 Paired Devices
- If not paired, you can only access settings and search.
- In the pairing interface, click the search icon to find nearby devices.
- Select the device to pair. Your phone will prompt for a PIN code. Enter the PIN code. A successful connection is indicated by a specific icon.
2.6.2 Bluetooth Music
Click the music icon to enter the music player interface. After connecting your phone, you can play, pause, and skip tracks.
2.6.3 Bluetooth Address Book
- In the Bluetooth interface, click the address book icon.
- To download, select Phone/SIM and click [Download] to confirm the synchronization request.
- To find a contact, after synchronization, click the corresponding phone/SIM button. A search box will appear.
2.7 Music Function
Click the music icon to enter the music player. Select the playback path (Playlist, SD Card, U Disk, Local) at the top of the interface.
2.8 Video Function
Click the video icon to enter the video player. Supported formats include MP4, AVI, WMV, MOV, MKV, MPEG, RMVB.
2.9 Equalizer (EQ)
There are two ways to access the EQ interface:
- From the application interface, click the equalizer icon.
- From the radio or music interface, click the equalizer icon.
The EQ offers 8 sound effects and allows adjustment of bass, loudness, and individual speaker volumes (front left, front right, rear left, rear right).
2.10 AUX IN
Enter the AUX IN interface. If no video input signal is connected, a default screen is displayed. With a signal, the video screen appears. You can return to the previous interface or the main interface.
2.11 CarPlay / Android Auto / Mirror Link
The unit supports Wireless/Wired Apple CarPlay, Wireless/Wired Android Auto, and Wireless/Wired Mirror Link.
2.11.1 Wireless Apple CarPlay
- Connect your iPhone to the car radio via Bluetooth.
- Go into the App "ZLINK5".
2.11.2 Wired Apple CarPlay
- Connect your iPhone to the car radio using the original iPhone USB cable (use the 4-pin cable if two are provided).
- Go into the App "ZLINK5".
2.11.3 Wireless Android Auto
- Install the "Android Auto" app on your phone.
- Connect your phone to the car radio via Bluetooth.
- Go into the App "ZLINK5".
2.11.4 Wired Android Auto
- Install the "Android Auto" app on your phone.
- Connect your phone to the car radio using the original Android USB cable (use the 4-pin cable if two are provided).
- Go into the App "ZLINK5".
2.11.5 Wireless Mirror Link (for iPhone)
- Turn on the hotspot on your iPhone.
- Connect the car radio to your iPhone's hotspot.
- Select screen mirroring and then Z-mirror.
2.11.6 Wireless Mirror Link (for Android)
- Scan the QR code (provided in the product packaging or on screen) and install the "Zplus" app on your phone.
- Connect the car radio to your phone via Bluetooth.
- Turn on the hotspot on your phone.
- Connect the car radio to your phone's hotspot.
- Go into the "Zplus" app on your phone and press "Start Mirroring".
2.11.7 Wired Mirror Link (for iPhone)
- Connect your iPhone to the car radio using the original iPhone USB data cable.
2.11.8 Wired Mirror Link (for Android)
- Scan the QR code (provided in the product packaging or on screen) and install the "Zplus" app on your phone.
- Connect your phone to the car radio using the original Android USB data cable.
- Follow the prompts on your phone.
2.12 Split Screen
To use split screen functionality, click the split screen icon to pop up multiple pages. Drag the desired pages to the left and right to divide the screen.
2.13 Steering Wheel Learning
This feature allows you to map your car's steering wheel buttons to control the head unit.
- Go to Settings > Car Settings > General > Enter SWC setting interface.
- Click on the button you want to learn on the head unit's screen.
- Press the corresponding button on your car's steering wheel. If successful, the buttons on the square control interface will change color.
- Repeat steps 2 and 3 until all desired steering wheel buttons are configured.
- Click [End] to finish the controller setting process.
Note: If you need to relearn a steering wheel button, click [Start] and then [Clear], then repeat steps 1, 2, and 3.
2.14 Date and Time
The device automatically calibrates the current time via network or GPS. You can manually set the date, time, time zone, and time format if needed.
- Go to Settings > System > Date and time to adjust these settings.
2.15 Switching Input Method
- Go to Settings > System > Language and input > Virtual keyboard > Manage keyboards. Enable the desired keyboard and disable others.
2.16 Button Light Settings
You can customize the illumination color of the physical buttons.
- Go to Settings > Car Settings > Display > Illumination color.
- Model 1: Open LED Animation for automatic color change.
- Model 2: Close LED Animation and click to manually switch colors.
3. Specifications
| Feature | Specification |
|---|---|
| Is touch screen | Yes |
| Built-in Screen | Yes |
| Din | One Din |
| RAM Options | 2G, 4G, 8G |
| ROM Options | 32G, 64G, 128G |
| Interface | Pin to pin |
| Operating System | Android |
| Out Power | 45*4 W |
| Voltage | 12 V |
| Item Size | 10.25 inches |
| Output Type | Colored |
| Special Features | WiFi function, Support 3G/4G Network, Support Can-Bus, Built-in GPS, Charger, Mobile Phone, MP3 players, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Remote Controller Included, Support steering wheel control |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support including English, Spanish, French, German, Italian, etc. |
| Resolution | 1920*720 |
| Display Size | 10.25 inches |
| Origin | Mainland China |
| For Vehicle Brands/Model | MAZDA (Mazda 3 / Axela 2013-2018) |
| Certification | CE |
4. Maintenance
To ensure the longevity and optimal performance of your HMG Android Radio, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that could damage the surface.
- Temperature: Operate the device within normal vehicle operating temperatures. Extreme heat or cold can affect performance and lifespan.
- Software Updates: Periodically check for software updates to ensure you have the latest features and bug fixes. Updates are typically available through the device's settings or the manufacturer's website.
- Cooling Fan: The unit is equipped with a powerful cooling fan to prevent overheating. Ensure the fan vents are not obstructed to maintain proper airflow.
5. Troubleshooting
If you encounter any issues, please refer to the following common problems and solutions:
- No Power:
- Check if the car key is in the ACC position and the car's power is on.
- Verify all power connections (B+, ACC, GND) are secure according to the wiring diagram.
- Ensure the car's fuse related to the radio is not blown.
- No Sound:
- Check the volume settings on the device and ensure it's not muted.
- Verify speaker connections (FR+, FR-, FL+, FL-, RR+, RR-, RL+, RL-).
- If using navigation, check navigation volume settings and ensure "Reversing mute" is not enabled if sound is expected during reverse.
- Bluetooth Connection Issues:
- Ensure Bluetooth is enabled on both the head unit and your mobile device.
- Delete previous pairings and try pairing again.
- Restart both devices.
- Navigation Not Working / No GPS Signal:
- Ensure the GPS antenna is properly connected and placed in a location with clear sky view.
- Verify that map data is correctly installed and the navigation path is selected in settings.
- Steering Wheel Controls Not Responding:
- Ensure KEY1 and KEY2 wires are correctly connected.
- Perform the "Steering Wheel Learning" procedure again as described in section 2.13.
- Screen Unresponsive / Abnormal Touch:
- Restart the device.
- Ensure the powerful cooling fan is functioning to prevent overheating, which can cause touch issues.
If the problem persists, please contact customer support for further assistance.
6. User Tips
- Retaining Original Car Controls: This head unit is designed to integrate with your vehicle's existing controls, including the control knob and steering wheel buttons. You should not lose these functionalities after installation. Ensure proper wiring and configuration in the settings (e.g., Steering Wheel Learning) to maintain full control.
- Access to Original Car System: The installation of this Android Radio typically replaces the original head unit's display and functions. However, some original car functions (like vehicle radar, door information) are often retained through CAN-Bus integration. Access to the full original car system interface might be limited or replaced by the Android system.
- Harman Kardon Compatibility: For specific audio systems like Harman Kardon in your Mazda 3, compatibility can vary. It is recommended to consult with the seller or a professional installer to confirm full compatibility and ensure optimal audio performance before installation.
- Custom UI Options: Explore the "More Than 100 UI Options" available in the settings to customize the look and feel of your head unit's interface to match your preference.
- Offline Maps: For reliable navigation, especially in areas with poor network coverage, ensure you have downloaded and installed offline map data as described in section 1.4.
7. Warranty and Support
For warranty information and technical support, please refer to the documentation provided by your seller or contact the HMG Store directly. Keep your purchase records handy when seeking support.
If you have any questions or require assistance, please contact customer service. They will provide a satisfying answer.