FREDORCH SEX MACHINE FR2 User Manual

1. Safety Information

Read Carefully Before Use

• DO NOT use this product if you suffer from gynecological diseases, heart problems, or any physical or mental condition that renders you unable to withstand strong stimulation without first consulting with your doctor.
• Stop use if you experience any discomfort. For best results, apply a personal lubricant (not included) as needed.
• ALWAYS use this product on stable, level, and clean surfaces.
• DO NOT use this product if it is damaged or shows signs of malfunction. Repair or replace worn or broken parts before further use.
• DO NOT leave this product unattended during use.
• DO NOT get this product wet or operate it with wet hands.
• ALWAYS disconnect this product from its power source before cleaning, servicing, and storage.

2. Product Overview

The FREDORCH FR2 is an intelligent sex machine designed for automatic thrusting, offering adjustable stroke length and multiple speed/frequency settings. It features an anti-rotation system for enhanced stability and comes in various control versions including wired, wireless remote, and APP-controlled options.

3. Setup

3.1 Assembling the Machine

1. Attach the two hollow T-bars (frame supports) to the main machine body.
2. Insert the rod with the "ANTI ROTATION Connector" into the designated slot on the machine.
3. Connect the power adapter to the machine's power inlet and then to a compatible grounded power source (100-240V, 50-60Hz). Do not use a 3-to-2 prong adapter or ungrounded power strip.

3.2 Attaching Accessories

The FR2 features a Decagon Anti-Rotation Interface for secure attachment of accessories. Ensure accessories are compatible with this unique interface.

For Suction Cup Adapters:

1. Click the Suction Cup Adapter onto the bar.
2. Check if the bar is screwed on tightly before use.
3. Attach a suction cup sex toy onto the adapter.
4. The device is ready for use.

For Extension Bars:

1. Click the extension bar onto the sex machine.
2. Check if both bars are connected tightly before use.
3. Click a KlicLok sex toy onto the extension bar.
4. The device is ready for use.

3.3 Adjusting Height and Angle

1. While holding the machine's main body with one hand, loosen the vertical clamps of the joints by pulling their levers open.
2. Raise or lower the main body until your desired height is reached.
3. Lock the main body by pushing the levers closed.

4. Operation

4.1 Adjusting Thrusting Length

1. Loosen the knob on the connecting rod by turning it counter-clockwise.
2. Slide the knob and rod forward or backward until you reach your desired thrusting length (3-9 cm).
3. Retighten the knob by turning it completely clockwise.

4.2 Using the Remote Control

The remote control allows for wireless operation with multiple modes and speed settings.

• Modes Key (1-4, 5-8): Select from 8 different thrusting modes.
• Speed Key (Knob): Adjust the speed from 1 to 18.
• On/Off/Pause Key (Play/Pause icon): Start, pause, or stop the machine.

The remote control's internal battery (3.7V 300mAh 1.11Wh) can be charged from an external power source or directly by the machine. It can be used while charging.

4.3 Using Wired Control (Dual-Control Version)

For dual-control versions, a wired controller is included, providing manual speed control. This controller typically has a 1.5m line.

4.4 APP Control (Optional)

If you purchased an APP-enabled version, the machine can be controlled via an iOS or Android application. This allows for internet control, third-party invitations, and access to endless programs.

• Download the official FREDORCH APP from your device's app store.
• Register and connect your machine following the in-app instructions.
• Explore various modes, create self-programmable processes, and invite others for internet control.

Note: The APP function is only available if you specifically chose and purchased the APP version.

5. Maintenance

1. Unplug your machine after each use and prior to any cleaning or other maintenance.
2. Clean the exterior of your machine after each use with a soft, damp cloth. Do not rinse the machine or use abrasive cleaners or caustic chemicals.
3. For dildos and other accessories: Unscrew them from your machine, rinse with clean water or mild detergent, and air dry in a well-ventilated place away from direct sunlight.
4. Allow all parts to dry completely before further use.

6. Troubleshooting

• Machine not turning on: Ensure the power cord is securely connected to both the machine and a grounded outlet. Check if the power adapter is functioning correctly.
• Unusual noise or malfunction: Immediately stop using the product. Disconnect from power and inspect for any visible damage or loose parts. Do not attempt to repair complex internal components yourself.
• Motor feels weak: While the motor is designed for heavy duty use, some users have noted it can be stopped with strong pelvic muscles. This is generally within expected performance parameters.
• Non-functional power cable: If the included power cable is non-functional upon receipt, contact customer support for a replacement.
• Accessories not fitting: Ensure you are using accessories designed for the unique Decagon Anti-Rotation Interface of the FR series. Universal interfaces may not be compatible.

7. Specifications

8. User Tips

• For optimal experience, apply a personal lubricant as needed.
• Always ensure the machine is placed on a stable and clean surface during use.
• Upon receiving your product, verify that all components, especially the power cable, are functional. Contact support immediately if any part is non-functional.
• The machine's motor is powerful but can be resisted by strong pelvic muscles. This is normal operation.
• The packaging is discreet, resembling a set of dumbbells, ensuring privacy upon delivery.

9. Frequently Asked Questions (FAQ)

Q: Does the machine make noise, or is it silent?

A: The machine operates at a low noise level, ranging from 0 to 35 dB, which is nearly inaudible to a whisper. It is designed for quiet operation.

Q: Is a camera included with the machine?

A: A camera accessory is only included with specific "Wireless Wired + APP + camera versions." If you did not select this specific version during purchase, a camera will not be included.

Q: Is the APP function included with all versions?

A: The APP function is an optional feature. It is only available if you specifically chose and purchased an APP-enabled version of the machine.

10. Warranty and Support

For detailed item guides and documents, please refer to the official user manual PDF available at: User manual (PDF).

For information regarding return and refund policies, or security and privacy details, please consult the respective sections on the seller's platform or contact customer service directly.