YJCAL 6mm LED Indicator Light

Contents

6mm LED Waterproof Metal Indicator Light User Manual

Model: 6mm LED Indicator Light

Brand: YJCAL

Introduction

This manual provides instructions for the YJCAL 6mm LED Waterproof Metal Indicator Light. This device is an industrial or traffic indicator, featuring a durable metal casing. It is designed to convey clear status information, such as operation, shutdown, or warnings, and is suitable for complex environments or scenarios requiring high reliability.

WARNING:

  • Do not disassemble this product by yourself.
  • Pay attention to the rated voltage for use.

Setup and Installation

The 6mm LED indicator light is designed for straightforward installation. Ensure the power source is disconnected before beginning installation.

  1. Prepare Mounting Hole: Ensure you have a 6mm diameter mounting hole for the indicator light.
  2. Insert Indicator: Insert the LED lamp body through the mounting hole.
  3. Secure with Fixing Nut: Place the fixing nut onto the threaded body of the indicator light from the back and tighten it to secure the light in place.
  4. Ensure Seal: Position the rubber seal ring between the indicator light and the mounting surface to ensure a waterproof seal.
  5. Connect Wiring: The indicator light comes with a 150mm cable. Connect the wires to your power source, ensuring correct polarity and voltage matching the indicator's rating. The cable features a PA66 flame retardant shell for safety.
Diagram showing the components of the LED indicator light: rubber seal ring, fixing nut, and LED lamp.
Figure 1: Exploded view of the LED indicator light components, including the rubber seal ring, fixing nut, and LED lamp.
Close-up of the LED indicator light showing the 150mm cable and PA66 flame retardant shell.
Figure 2: Detail of the indicator light's wiring, highlighting the 150mm cable length and the PA66 flame retardant shell for enhanced safety.

Operating Instructions

Once properly installed and connected to a compatible power source, the LED indicator light will illuminate to provide visual status feedback. These lights are available in various colors and voltages to suit different application needs.

A row of five 6mm LED indicator lights, each illuminated in a different color: white, yellow, red, blue, and green.
Figure 3: Example of the 6mm LED indicator lights illuminated in various colors.

The indicator lights are designed for continuous operation within their specified voltage range. They are commonly used in control panels, machinery, and automotive applications to indicate power status, fault conditions, or operational modes.

Maintenance

The YJCAL 6mm LED indicator light is designed for long-term, maintenance-free operation. It boasts a long service life of approximately 50,000 hours.

  • Cleaning: If necessary, gently wipe the metal casing and LED lens with a soft, damp cloth. Avoid abrasive cleaners or solvents.
  • Disassembly: Do not attempt to disassemble the unit. Internal components are not user-serviceable.
  • Inspection: Periodically check the wiring connections for any signs of wear or damage, especially in high-vibration environments.
A row of multiple colored LED indicator lights with text overlay stating '50,000 Hours Long Service Life'.
Figure 4: The LED indicator lights are built for durability and a long operational lifespan.

Troubleshooting

If your LED indicator light is not functioning as expected, consider the following common issues:

  • No Illumination:
    • Verify that the power supply is active and providing the correct voltage (e.g., 6V, 12V, 24V, 220V) as specified for your indicator light. Incorrect voltage can prevent illumination or damage the LED.
    • Check wiring connections for proper contact and polarity.
    • Ensure the LED itself is not damaged.
  • Intermittent Illumination:
    • Inspect all wiring for loose connections or frayed insulation.
    • Ensure the fixing nut is securely tightened.

Important: Always ensure the rated voltage matches your power source to prevent damage to the indicator light.

Specifications

Feature Specification
Brand Name YJCAL
Item Type Indicator Lights
Origin Mainland China
Certification CE
Is Bulbs Included Yes
Power Source DC
Luminous Flux <60
Diameter 6mm
Types Indicator light
Voltage Options 6V-12V, 12V-24V, 24V, 220V
Color Options Red, Green, Yellow, Blue, White

User Tips

  • Voltage Compatibility: Users have successfully powered these lights using a 5V AC transformer winding, indicating some flexibility, but always adhere to the rated DC voltage for optimal performance and longevity.
  • Quality Assurance: Many users report satisfaction with the quality, especially for the price point.
  • Bulk Purchases: Be aware that these indicators are typically sold individually, not in sets, unless specified by the seller.

Warranty and Support

For further information or support regarding your YJCAL 6mm LED Waterproof Metal Indicator Light, please refer to the official user manual available in PDF format. You can access it via the following reference: User Manual (PDF).

For specific inquiries, please contact the seller or manufacturer, YJCAL, directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.