Product Overview
The MOES Tuya Wi-Fi Smart Button Wall Switch is an advanced smart home device developed with Wi-Fi and Bluetooth modules. It is compatible with the Tuya platform and supports both single-live wire and neutral-live wire installations. For installations without a neutral wire, a capacitor is included to ensure stable operation without noise. This smart switch can be controlled locally via the physical buttons, remotely through a mobile application, or using smart speakers like Amazon Alexa and Google Home.
Package Contents
- Smart Switch ×1
- User Manual ×1
- Line Sequence Sticker ×1
- Screw ×2
- Wiring Cap ×6
- Panel ×1
Safety Warnings
Risk of Electric Shock:
- Electricity can cause personal injury and property damage if handled improperly. If you are unsure about any part of these instructions, please seek professional assistance from a qualified electrician.
- Always turn off the power at the circuit breaker and test that power is off before wiring or performing any installation/removal.
- Disconnect the power supply before installing or removing the device to prevent irreversible damage from electric current or unpredictable issues like lamp flashing.
- We recommend removing the faceplate from the old switch and using an electrical tester to confirm there is no voltage in the circuit. You may need to turn off more than one circuit breaker.
Specifications
| Parameter | Value |
|---|---|
| Model | WS-B-US-L |
| Voltage | 90-240V AC, 50/60Hz |
| Max. Current | 8A/Gang; Total 8A |
| Wireless Protocol | Wi-Fi 2.4GHz |
| Frequency Band | 2.412-2.484GHz |
| Max. Radio Transmit Power | <+16dBm |
| Certification | CE |
Dimensions
Installation Guide
Preparation
- Turn off Power: Locate your circuit breaker and turn off the power to the switch you are replacing. Use an electrical tester to confirm the power is off before proceeding.
- Remove Old Switch: Carefully remove the faceplate and then the old switch from the wall box.
- Identify Wires: Identify the Line/Load wires. Note that wire colors may vary from standard diagrams. Take pictures of the existing wiring for reference. Use the provided label stickers to mark corresponding wires to prevent confusion.
Wiring Options
Choose the appropriate wiring method based on your wall box configuration:
Option 1: No Neutral Wire Installation (Capacitor Required)
This method is used when your wall box does not have a neutral wire (common in older homes). The included capacitor must be installed at the light fixture (L1), not at the switch.
Option 2: Neutral + Live Wire Installation (No Capacitor Needed)
This method is used when your wall box has both a neutral and a live wire.
Note: The image above shows both wiring options. Please refer to the specific diagram for your installation type.
Final Steps
- Connect Wires: Connect the smart switch wires to the wires in the wall box according to the chosen wiring diagram. Use the provided wiring caps to secure connections.
- Mount Switch: Gently push the switch into the wall box and mount it using the two side screws.
- Install Panel: Install the glass panel onto the switch.
- Restore Power: Turn the power back on at the circuit breaker.
Ensure a stable Wi-Fi signal is available and working normally before wiring. If you lack wiring experience, consult a professional electrician.
Operating Instructions
1. App Download and Registration
- Download MOES App: Scan the QR code below or search for "MOES" in your device's App Store (iOS) or Google Play Store (Android). The MOES App is recommended for enhanced compatibility and features.
- Register/Login: Open the MOES App. If you are a new user, tap "Register" and follow the prompts to create an account using your phone number and setting a password. If you already have an account, tap "Log in".
2. Connecting the Smart Switch to Wi-Fi
Important Note:
- The switch only supports 2.4GHz Wi-Fi networks. If you are connected to a 5GHz network, please disconnect from it and connect to a 2.4GHz network before pairing.
- Reset Device: Long press the switch button for 6 seconds until the white indicator light on the switch flashes rapidly. This indicates the device is in network connection mode.
- Add Device in App: In the MOES App, scan the QR code provided in the app or manually add the device.
- Enter Wi-Fi Password: Enter your 2.4GHz Wi-Fi network password and tap "Next". The app will begin connecting to the device.
- Confirm Connection: Once the device is successfully added, you can edit its name. Tap "Done" to enter the device page and begin using your smart switch.
3. Advanced Features
Voice Control
The smart switch is compatible with Amazon Alexa and Google Home. Once connected to the MOES App, you can link your account to these voice assistants to control your lights with voice commands (e.g., "Alexa/OK Google, turn on the switch.").
Timing Control / Personalized Schedules
Set personalized lighting schedules within the MOES App. You can configure countdowns, recurring schedules, circulate, random, or inching functions to automate your lighting based on your daily routine, eliminating the need for manual control.
Multi-Control Association (for N+L wire only)
This feature allows multiple smart switches to control a single light without complex rewiring. Ensure your main switch is already added to the MOES App. Add another smart switch to the same app. If your switch requires a neutral wire, you only need to wire the new switch to Line (L) and Neutral (N), not directly to the light. You can then associate the switches in the app to control one light from multiple locations.
Backlight ON/OFF
The switch features an adjustable backlight. You can turn the backlight ON or OFF as per your preference, which can be useful for sleeping environments.
Indicator Status Settable
Customize the indicator light behavior. Options include indicating switch location, indicating switch on/off status, or turning the indicator off completely.
Power-on Status Settings (Relay Status)
Configure the switch's behavior after a power outage. You can choose for the switch to be power-off, power-on, or remember its last status, avoiding unexpected changes.
Family Sharing Function
Utilize the Family Management function in the Smart Life/MOES App to share control of your smart devices with family members or friends. Once added, all devices within the family group can be shared and controlled by authorized users.
Fan Control
The MOES Smart Switch can be used to control ceiling fans. Please note that 1-gang switches are generally not applicable for fan control; 2, 3, or 4-gang switches are typically required.
Maintenance
The switch is made of high-quality PC material with toughened glass, making it easy to clean and suitable for various environments. To clean the switch, gently wipe the surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the finish.
Troubleshooting
- Device not connecting to Wi-Fi: Ensure your Wi-Fi network is 2.4GHz. If you are using a dual-band router, temporarily disable the 5GHz band or ensure your device is connected to the 2.4GHz band during the pairing process.
- Switch unresponsive: Verify that the power at the circuit breaker is on. If the switch is still unresponsive, try resetting the device by long-pressing the button until the indicator flashes rapidly, then attempt to re-pair it with the app.
- Lamp flashing or noise: For installations without a neutral wire, ensure the capacitor is correctly installed at the light fixture (L1). Incorrect capacitor placement or a faulty capacitor can cause these issues.
- General issues: For further assistance or specific troubleshooting steps, please refer to the product data sheet available at: https://www.moestech.com/blogs/news/ws-b-us-l
User Tips
- Stable Wi-Fi: Ensure your Wi-Fi network is stable and within range of the switch for optimal performance.
- Proper Wiring: Double-check all wiring connections during installation. Loose connections can lead to intermittent operation or safety hazards.
- App Features: Explore all features within the MOES App, such as scheduling, multi-control, and indicator settings, to fully customize your smart home experience.
- Capacitor Placement: If installing without a neutral wire, remember to install the capacitor at the light fixture, not at the switch, for proper function.
Warranty and Support
Warranty Information
- Products are covered by a 24-month warranty, effective from the date of purchase by a retail customer.
- To exercise warranty rights, the purchaser must present: a) Warranty card, b) Proof of purchase (VAT invoice, financial receipt, or other document confirming the actual date of purchase), unless the purchase date of the product comes from the warranty card.
- If product quality problems occur within 24 months from the date of receipt, prepare the product and packaging and go to the place or store where you purchased it to apply for after-sales maintenance. If the product is damaged due to personal reasons, a maintenance fee will be charged.
- We recommend properly protecting the goods when delivering them for warranty service, ideally using the original packaging with padding. If using replacement packaging, ensure adequate protection against damage during shipping. Consider marking the packaging with "Warning Glass" if applicable.
- Reported defects covered by the warranty will be considered immediately and no later than 14 days from the date of delivery of the goods to the Guarantor.
- After checking and determining the legality of the warranty claim, the Guarantor's services will repair the product within a reasonable time, not exceeding 30 days from the date of delivery of the goods to the Guarantor. However, if hard-to-find spare parts are required, this deadline may extend.
- The warranty does not include the performance of maintenance and similar operations specified in the user manual, and users are obliged to do it themselves.
- Defects due to natural wear and tear during use are not covered by the warranty.
- The warranty does not cover: a) Mechanical damage caused by the user's fault and product defects caused by such damage. b) Damage caused by improper use of the product.
- The rights under the guarantee will expire if: a) The warranty seal is removed from the product. b) The serial number is removed from the product. c) Action is taken to eliminate physical defects in the product outside of authorized service. d) Non-original parts and consumables are used.
Recycling Information
All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. Contact your installer or local authority for information on collection points and procedures.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Contact Information
Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service Email: service@moeshouse.com
UK Representative (EVATOST CONSULTING LTD):
Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292-1680945
Email: contact@evatost.com
EC Representative (AMZLAB GmbH):
Address: Laubenhof 23, ESSEN 45326
Email: info@amz-lab.de
Tel: +491745298066
For the full user manual in PDF format, please refer to the document linked in the product description or contact support.