1. Introduction
The M5Stack TAB5 is a highly expandable, portable smart-IoT terminal development device designed for developers. It integrates a dual-core architecture and rich hardware resources, making it suitable for a wide range of applications.
The main controller utilizes the ESP32-P4 SoC, based on the RISC-V architecture, complemented by 16MB Flash and 32MB PSRAM. For wireless connectivity, it features an ESP32-C6-MINI-1U module supporting Wi-Fi 6. The device's antenna system offers flexibility, allowing users to switch between a built-in 3D antenna and an external MMCX antenna interface, ensuring optimal data throughput and low-latency control in various deployment environments.
For an enhanced visual and interactive experience, the TAB5 is equipped with a 5-inch 1280x720 IPS touchscreen with an MIPI-DSI interface, providing smooth and responsive touch interaction. It also includes an SC2356 2MP camera (1600x1200) with an MIPI-CSI interface, capable of HD video recording, image processing, and edge AI applications such as facial recognition and object tracking.

2. Key Features
- Processor: ESP32-P4 dual-core MCU (400MHz RISC-V) + LP Single-core 40MHz
- Memory: 16MB Flash & 32MB PSRAM
- Wireless: ESP32-C6 wireless module, 2.4 GHz Wi-Fi 6, Thread, Zigbee
- Antenna: Built-in 3D antenna & 2 x MMCX external antenna ports (switchable)
- Display: 5-inch IPS TFT touchscreen, 1280x720 (720P) resolution, MIPI-DSI interface, ST7123 driver IC
- Camera: SC2356 2MP (1600x1200), via MIPI-CSI interface
- Audio: ES8388 codec, ES7210 AEC front-end, dual microphone system (AEC echo cancellation), 1W@8Ω NS4150B speaker, 3.5mm headphone jack
- Sensors: BMI270 6-axis sensor (accelerometer + gyroscope, interrupt wake-up)
- Real-time Clock (RTC): RX8130CE with supercapacitor (70000µF/3.3V)
- Power Management: IP2326 charging management chip, INA226 bus current/voltage monitoring
- Battery: Removable NP-F550 lithium battery (7.4V@2000mAh, 14.8 Wh) for Kit version (not included in standard Tab5)
- Ports: USB Type-A (Host), USB Type-C (USB 2.0 OTG), RS485 industrial interface (SIT3088 with switchable 120Ω terminator)
- Expansion: 1x HY2.0-4P, 1x M5-Bus, GPIO_EXT expansion bus, microSD card slot, Stamp expansion pads (for Cat.M, NB-IoT, LoRaWAN, etc.)
- Mounting: Standard 1/4"-20 tripod-mount nut
- Development Platforms: UiFlow2, Arduino IDE, ESP-IDF, PlatformIO

3. Setup and Initial Configuration
3.1. Battery Installation (for TAB5 Kit C145/K145)
The TAB5 Kit (SKU: K145) includes a removable NP-F550 Li-ion battery. The standard TAB5 (SKU: C145) requires an external power source or a separately purchased battery.
- Ensure the device is powered off.
- Locate the red locking button on the side of the main board and press and hold it.
- Align the metal spring contacts on the back of the battery module with the 'BATTERY' slot on the main board.
- Slide the battery module downward along the rail until it fits flush with the main board.
- Release the red button to secure the battery. The device is now ready to be powered on.

3.2. Power On/Off
- Power On: When the device is off and powered by a USB data cable or battery, press the power button once to turn it on.
- Power Off: When the device is on, double-press the power button to shut it down.
3.3. Charging
The TAB5 can only be charged after the device is powered on and initialized. Charging is not possible when the device is off.
3.4. Download Mode
To enter download mode for firmware flashing:
- Connect the USB data cable or ensure the battery is supplying power.
- Press and hold the reset button for approximately 2 seconds until the internal green LED starts flashing rapidly.
- Release the button. The device will now be in download mode, awaiting firmware flashing.
4. Operating Instructions
The M5Stack TAB5 offers a versatile interface for various functions. The following video demonstrates key operational aspects and tests.
4.1. Basic UI Interactions and Tests
- Microphone Test: The device supports dual microphone inputs. Use the 'Mic Test' function on the display to verify microphone operation.
- RF Switch: An RF switch allows toggling between the internal 3D antenna and an external MMCX antenna for flexible connectivity.
- USB-A Power Control: The USB-A port supports power control and Mouse HID device input.
- I2C Scan: Perform internal I2C Bus and PORT.A scanning to detect connected devices.
- 3.5mm Headphone Jack: Test audio output and recording via the 3.5mm headphone jack.
- MicroSD File Listing: Scan and list files on the MicroSD card.
- Speaker Audio Playback Test: Test speaker output and adjust volume and screen brightness.
- RS-485 Testing: Utilize the 'Com Monitor' for RS-485 communication testing.
- Camera Image Preview: Access the camera function to preview images from the 2MP front camera.
- Bus GPIO Testing: Perform GPIO tests on the M-BUS and other GPIO pins.
- RTC Configuration: Configure the Real-Time Clock (RTC) settings, including date and time.
- Power-Off and Wake-Up Functions: The device supports various sleep and wake-up modes, including touch to wake-up and shake to wake-up.
4.2. Applications
The M5Stack TAB5 is suitable for a wide range of applications, including:
- Smart-home control panels
- Remote monitoring systems
- IoT device development
- Industrial automation
- Multimedia players
5. Expansion Capabilities
The TAB5 is designed for high expandability, allowing users to integrate additional modules and peripherals.
5.1. M5-Bus Expansion
The back of the Tab5 integrates an M5-Bus connector, which can be used to expand Module series products. This allows for seamless integration of various M5Stack modules to extend functionality.
5.2. Stamp Expansion Pads
Reserved STAMP pads are available for integrating modules such as Cat.M, NB-IoT, LoRaWAN, and others, providing versatile sensor and communication expansion options.
6. Technical Specifications
| Specification | Parameter |
|---|---|
| Controller SoC | ESP32-P4NRW32@RISC-V 32-bit Dual-core 400MHz + LP Single-core 40MHz |
| Wireless Module SoC | ESP32-C6-MINI-1U |
| Flash | 16MB |
| PSRAM | 32MB |
| Wi-Fi | 2.4 GHz Wi-Fi 6, Thread, Zigbee |
| Antenna | Built-in 3D antenna & 2 x MMCX external antenna ports |
| Display | 5-inch IPS TFT, 1280x720 (720P), ST7123 driver IC |
| Camera | SC2356 @ 2MP (1600×1200), via MIPI-CSI interface |
| Audio Chip | ES8388 codec, ES7210 AEC front end |
| Microphone | Dual microphone system (AEC echo cancellation) |
| Speaker | 1W@8Ω NS4150B |
| Headphone Jack | 3.5mm |
| USB Ports | USB Type-A (Host), USB Type-C (USB 2.0 OTG) |
| RS485 Port | SIT3088 (120Ω switchable terminal resistor), Power supply range: 6 ~ 24V |
| Expansion Interface | 1x HY2.0-4P, 1x M5-Bus, GPIO_EXT expansion bus |
| Storage Expansion | microSD card slot |
| Extensible Stamp Interface | Stamp pads (support Cat.M/NB-IoT / LoRaWAN and other modules) |
| Motion Sensor | BM1270 six-axis (accelerometer + gyroscope, support interrupt wake-up) |
| RTC Chip | RX8130CE (supports timed interrupt wake-up), RTC supercapacitor specification: 70000µF/3.3V, size: 4.8×1.4mm |
| Charging Management | IP2326 charging management chip |
| Power Monitoring | INA226 (bus current / voltage monitoring) |
| Battery (Kit version) | NP-F550 removable lithium battery, 7.4V@2000mAh (14.8 Wh) |
| Battery Life | Under standard usage (screen brightness 50%, Wi-Fi always on, background tasks running), built-in battery discharges from full (8.23 V) to shutdown threshold (6.0V), lasting about 6 hours. |
| Operating Temperature | 0 ~ 40°C |
| Product Size (Tab5) | 128.0 × 80.0 × 12.0mm |
| Product Size (Tab5 Kit) | 128.0 × 80.0 × 26.7mm |
| Product Weight (Tab5) | 124.5g |
| Product Weight (Tab5 Kit) | 277.4g |
| Battery Weight | 97.9g |
| Package Size (Tab5) | 148.0 × 103.0 × 21mm |
| Package Size (Tab5 Kit) | 191.0 × 103.0 × 25.0mm |
| Gross Weight (Tab5) | 162.5g |
| Gross Weight (Tab5 Kit) | 277.4g |
7. Model Dimensions


For detailed dimensional drawings, please refer to the official product documentation or the schematics section.
8. Troubleshooting
- Device not powering on: Ensure the battery is correctly installed (for Kit version) or an external power source is connected. If using a battery, check its charge level.
- IMU sensor issues after direct power disconnection: If the device was powered off by direct disconnection, wait at least 5 seconds before powering on again to allow the IMU sensor to initialize properly and prevent abnormal voltage issues.
- Charging issues: The device can only be charged when it is powered on and initialized. Ensure the device is on when attempting to charge.
- Firmware update problems: Ensure the device is correctly in download mode (green LED flashing rapidly) before attempting firmware flashing. Verify the USB connection.
- Screen driver compatibility: Note that screen drivers were updated around October 14, 2025. If you are using older firmware builds, they might not run properly. Recompile your programs using the latest M5Unified and M5GFX versions for compatibility. Check the sticker on the back of your TAB5 to confirm the driver model.
9. User Tips
- Leverage its Versatility: The TAB5 is designed to be highly flexible. Don't limit yourself to one application; explore its potential for smart home automation, industrial control, or custom IoT projects by utilizing its various expansion ports and development platforms.
- Keep Firmware Updated: Regularly check for and install the latest firmware and library updates (M5Unified, M5GFX) to ensure optimal performance and compatibility, especially with screen driver changes.
- Proper Power Management: Always perform a proper shutdown before disconnecting power or replacing the battery to prevent potential issues with the IMU sensor.
10. Warranty and Support
For detailed warranty information, technical support, and further resources, please refer to the official M5Stack website or contact their customer service. Additional documentation, including schematics and datasheets, can be found on the product's dedicated support page.
A comprehensive user manual in PDF format is available for download, providing more in-depth information on the device's features and usage. Please visit the official M5Stack documentation portal to access this resource.