HLTNC 30KW 380V Soft Start Frequency Converter (VFD) User Manual
1. Product Overview
The HLTNC 30KW 380V Soft Start Frequency Converter (Variable Frequency Drive, VFD) is a professional speed control device designed for equipment start-up and shutdown. Operating at 380V voltage, 50HZ frequency, and 60A current, it integrates soft start, frequency conversion, and speed regulation functions. This VFD effectively reduces the impact of equipment start-up on the power grid and mechanical components, extends equipment service life, and achieves precise speed control, making it suitable for various industrial equipment that requires stable start/stop and speed adjustment.
With its compact structure, reliable performance, and user-friendly operation, the VFD is widely applicable to pumps, fans, motors, and other industrial equipment. It features soft start and soft stop functions to avoid mechanical shock, and the frequency conversion technology allows for stepless speed regulation, meeting different working requirements of equipment and saving energy.
A detailed user manual in PDF format is available for download here.
Figure 1: HLTNC Z7 Series Soft Starter
Video 1: Product Introduction
2. Product Specifications
| Parameter | Specification |
|---|---|
| Model Number | CHRHRO30Z7 |
| Product Name | HLTNC 30KW 380V Soft Start Frequency Converter (VFD) |
| Product Type | Variable Frequency Drive (VFD), Soft Start Speed Controller |
| Rated Power | 30KW |
| Rated Voltage | 380V AC |
| Rated Frequency | 50HZ |
| Rated Current | 60A |
| Output Current | 60A |
| Output Frequency | 50HZ |
| Output Type | SINGLE |
| Insulation Voltage | 660V |
| Withstand Voltage | 6KV |
| Short Circuit Current | 10KA |
| Dimensions (L*W*H) | 147 x 325 x 195 mm |
| Weight | 2.6 kg |
| Origin | Mainland China |
| Certification | CE |
| Category | AC53B |
| Key Functions | Soft Start, Soft Stop, Frequency Conversion, Speed Regulation |
| Package Weight | 2.9 kg |
| Package Dimensions | 15 x 10 x 8 cm |
Figure 2: VFD Parameters and Dimensions
3. Package Contents
The package typically includes the following items:
- 1 × HLTNC 30KW 380V Soft Start Frequency Converter (VFD)
- 1 × User Manual (This Document)
- 1 Set × Wiring Terminals
- 1 × Mounting Bracket
- 1 Set × Fixing Screws
Note: Power cables and control cables are not included; please use cables that match the rated voltage and current of the VFD.
4. Safety Notes
- The VFD uses 380V high-voltage power supply; do not touch the wiring terminals, internal components, or power cables with wet hands to avoid electric shock. Only professional personnel can perform wiring and maintenance.
- Ensure the wiring is correct before turning on the power; incorrect wiring may cause short circuit, VFD damage, or fire hazards.
- Do not overload the VFD beyond its rated power (30KW) or rated current (60A), which may burn out the VFD.
- Do not touch the VFD's heat sink during operation; it may be hot and cause burns.
- Keep the VFD and accessories away from children and untrained personnel to avoid accidental injury or equipment damage.
- When performing maintenance or troubleshooting, turn off the power supply and wait for the VFD to discharge completely (at least 5 minutes) before operation.
5. Installation Instructions
5.1. Preparation
- Gather all necessary components: HLTNC 30KW 380V VFD, mounting bracket, fixing screws, wiring terminals, and the equipment to be controlled (e.g., motor, pump).
- Ensure the power supply is turned off and disconnected to avoid electric shock during installation. Confirm the power supply voltage is 380V AC, matching the VFD's rated voltage.
- Choose a well-ventilated, dry, and cool installation location (away from high temperature, humidity, and corrosive substances) to ensure the VFD works normally.
- Check the VFD and accessories for any damage (such as cracks, loose terminals, or damaged components); do not use damaged products.
5.2. Installation Steps
- Mount the VFD: Fix the mounting bracket to the designated position with screws, then attach the VFD to the bracket, ensuring it is installed firmly and vertically for good heat dissipation.
- Wiring Connection: Connect the 380V AC power supply to the VFD's input terminals (marked as L1, L2, L3). Connect the output terminals (marked as U, V, W) to the controlled equipment (e.g., motor). Ensure the wiring is tight and correct; incorrect wiring may damage the VFD or equipment.
- Control Wiring (Optional): If external control is needed, connect the control cables to the corresponding control terminals of the VFD according to the wiring diagram.
- Test Installation: After completing all wiring, check the wiring again to avoid short circuit or reverse connection. Turn on the power supply and check if the VFD display is normal. If there is an error code, turn off the power immediately and check the wiring.
Figure 3: VFD Wiring Diagram
6. Operation Instructions
6.1. Pre-Operation Check
- Check the power supply to ensure it is 380V AC and stable, with no voltage fluctuations.
- Check the wiring connections between the VFD, power supply, and controlled equipment to ensure they are tight and secure.
- Turn on the VFD power and check the display; ensure there is no error code and the parameters are set correctly (default parameters can be used for initial operation).
6.2. Normal Operation (Start/Stop and Speed Regulation)
- Start Operation: Press the "Start" button on the VFD panel. The VFD will start the controlled equipment with soft start (gradually increasing speed) to avoid mechanical shock. The default start-up time can be adjusted according to actual needs.
- Speed Regulation: Rotate the speed adjustment knob on the panel or set the frequency parameter through the display to adjust the speed of the controlled equipment. The speed can be adjusted steplessly to meet different working requirements.
- Stop Operation: Press the "Stop" button on the VFD panel. The VFD will stop the equipment with soft stop (gradually decreasing speed), protecting the equipment and power grid from impact.
- During Operation: Observe the VFD display and the running status of the controlled equipment regularly. If an error code appears or the equipment runs abnormally, stop the VFD immediately and check for faults.
7. Maintenance and Care
- Clean the VFD regularly (once a month) to remove dust and debris from the surface and heat sink, ensuring good heat dissipation. Use a dry cloth or soft brush for cleaning; do not use water or corrosive cleaners.
- Check the wiring terminals regularly to ensure they are tight; re-tighten any loose terminals in time to avoid poor contact.
- Check the VFD's cooling fan regularly; if the fan is damaged or does not rotate, replace it immediately to prevent overheating.
- Avoid long-term overload operation of the VFD, which may damage internal components. Monitor the current display on the panel to ensure it does not exceed the rated 60A.
- Store the VFD in a dry, cool, and well-ventilated place when not in use, away from humidity, high temperature, and corrosive substances. Disconnect the power supply before storage.
8. Troubleshooting
This section addresses common issues and questions that may arise during the use of the HLTNC VFD.
- VFD does not start or motor does not run:
- Verify that the power supply is connected and stable (380V AC, 50Hz).
- Check all wiring connections for tightness and correctness, especially input (L1, L2, L3) and output (U, V, W) terminals.
- Ensure no error codes are displayed on the VFD panel. If an error code is present, refer to the detailed PDF manual for specific error definitions and solutions.
- Confirm the motor's power rating (e.g., 22 kW) is within the VFD's capacity (30 kW).
- Using with battery power supply:
- The VFD requires a stable 380V AC power supply. If using a battery system, an appropriate inverter capable of providing continuous 380V AC at the required current (up to 60A for this VFD) must be used to convert DC battery power to AC. The VFD itself does not convert DC to AC.
- Ensure the battery system and inverter can handle the peak current demands during motor start-up, even with the VFD's soft start function.
- Compatibility with 60Hz power supply:
- This HLTNC VFD model is specified for a rated frequency of 50Hz. Operating it on a 60Hz power supply without proper configuration or manufacturer's guidance may lead to malfunction, reduced performance, or damage to the unit and connected equipment. Consult the manufacturer if 60Hz operation is required.
- Overheating:
- Ensure the installation location is well-ventilated and free from obstructions.
- Clean the heat sink and cooling fan regularly. Replace the fan if it is damaged or not rotating.
- Avoid continuous operation above the rated current (60A).
8.1. User Tips
- Always verify that your power supply voltage (380V AC) and frequency (50Hz) precisely match the VFD's specifications to prevent operational issues or damage.
- When integrating the VFD with alternative power sources like battery banks, ensure a robust inverter is in place to deliver a stable and sufficient AC supply to the VFD.
- Regularly inspect and clean the VFD's cooling components to maintain optimal performance and extend its lifespan.
9. Warranty and Support
For any questions, problems, or suggestions regarding your HLTNC 30KW 380V Soft Start Frequency Converter (VFD), please contact our after-sales service for assistance. Please retain your purchase receipt for warranty claims.
10. Contact Information
For support, please reach out to HLTNC Official Store customer service.
Store Name: HLTNC Official Store
Store ID: 1100460110
Seller Admin Sequence: 121332251
Opened: June 18, 2011
Origin: Mainland China