Newmine Dash Cam

Contents

Newmine Dash Cam User Manual

Model: Dash Cam with IR Night Vision, Loop Recording & 2" IPS Screen 1080P

1. Introduction

Thank you for choosing the Newmine Dash Cam. This manual provides detailed instructions on how to set up, operate, and maintain your device. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage.

2. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, please contact your retailer.

  • Packing Box × 1
  • Dash Cam Recorder × 1
  • Instruction Manual × 1
  • Car Charger × 1
  • Rear Camera (Pull back lens) × 1
  • Rear Camera Mounting Cable × 1
  • Suction Cup Bracket × 1
  • 3M Adhesive Tape × 1
  • Screws × 2
  • 32GB Class 10 TF Card × 1
Contents of the Newmine Dash Cam package
Figure 2.1: Package Contents

Visual representation of all items included in the Newmine Dash Cam package.

3. Product Overview

Familiarize yourself with the components and controls of your Newmine Dash Cam.

Diagram of Newmine Dash Cam components with labels
Figure 3.1: Dash Cam Component Diagram

Detailed view of the dash cam showing all external features and connection points.

  1. Menu/Camera/Playback Button
  2. Power Button
  3. Down Button
  4. Confirm (OK) Button
  5. Up Button
  6. Front Camera Lens
  7. Microphone
  8. Reset Button
  9. Holder Interface (for bracket)
  10. Rear Camera Interface
  11. Power Interface (Mini USB)
  12. TF Card Slot
  13. Display Screen (2.0 inch IPS HD)
  14. Inside Camera Lens (optional, for cabin recording)
  15. Night Vision On/Off Switch

4. Setup and Installation

Follow these steps to properly install your dash cam in your vehicle.

  1. Test Rear Camera (if applicable): Before permanent installation, connect the rear camera to the main unit and power it on to ensure it functions correctly.
  2. Turn Off Vehicle: Ensure your car engine is turned off before proceeding with installation.
  3. Insert TF Card: Insert the provided 32GB Class 10 TF card into the TF Card Slot (12) on the dash cam. Ensure it clicks into place. Note: Use a high-speed TF card (Class 10 or above) with a capacity of at least 4GB and not exceeding 32GB.
  4. Mount Dash Cam: Attach the suction cup bracket to the dash cam via the Holder Interface (9). Securely mount the dash cam to the front windshield, ensuring it does not obstruct your view.
  5. Connect Power: Insert the car charger into your vehicle's cigarette lighter socket. Connect the Mini USB end of the car charger cable to the Power Interface (11) on the dash cam. Route the cable neatly along the car's interior trim.
  6. Install Rear Camera (Optional):
    • Option A (Inside Glass): Adhere the rear camera to the rear window glass. This provides real-time rear video recording but typically does not enable the reversing visual function.
    • Option B (Professional Installation for Reversing Visual): For the reversing visual function, it is recommended to have the rear camera professionally installed near the license plate. This requires connecting the camera's power cable to your vehicle's reversing lights.
    Connect the rear camera cable to the Rear Camera Interface (10) on the main dash cam unit.
  7. Adjust Lens: Adjust the angle of the front, inside, and rear camera lenses to ensure optimal viewing angles and coverage.
  8. Start Vehicle: Start your car engine and verify that the dash cam powers on automatically and begins recording.
Dash Cam mounted on windshield showing dual recording views
Figure 4.1: Dash Cam Installation and Dual Recording

Example of the dash cam mounted, illustrating simultaneous front and cabin recording.

5. Operating Instructions

5.1 Basic Operation

  • Power On/Off: The dash cam will automatically power on and start recording when the car engine starts. It will save the recording and power off when the engine is turned off. You can also long-press the Power Button (2) to manually turn the device on or off.
  • Screen On/Off: Short-press the Power Button (2) to turn the display screen on or off while the device is operating.
  • Recording: In video mode, short-press the Confirm (OK) Button (4) to start or stop recording. A red flashing dot on the screen indicates recording is active.
  • Menu Navigation: Use the Up (5) and Down (3) buttons to navigate through menu options. Press the Confirm (OK) Button (4) to select an option. Press the Menu Button (1) to exit the menu.

5.2 Key Features

  • Automatic Recording: The dash cam automatically starts recording when the car engine is turned on and saves the recording before shutting down when the engine is turned off. Video segments are stored on the TF card. When the TF card is full, the oldest recorded footage will be overwritten (loop recording).
  • Loop Recording: You can set the duration of video segments (1/2/3 minutes) in the menu. Videos are saved in separate folders (e.g., "DCIMA" and "DCIMB") on the TF card.
  • G-Sensor (Gravity Sensor): The built-in G-sensor detects sudden impacts or collisions. In such an event, the dash cam will automatically lock the current video file (5 seconds before and 10 seconds after the event) to prevent it from being overwritten. A lock icon will appear on the screen. Sensitivity can be adjusted in the settings.
  • Manual Lock Function: During video recording, short-press the Menu Button (1) to manually lock the current video file, protecting it from being overwritten by loop recording.
  • Motion Detection: In standby mode, enable motion detection from the menu. The dash cam will automatically start recording for 30 seconds if it detects movement in front of the lens. To exit, disable motion detection in the menu.
  • Parking Monitor: For unattended surveillance, ensure the dash cam is continuously powered (e.g., via a hardwire kit). Enable motion detection and parking monitoring in the menu. If vibration or movement is detected while parked, the dash cam will automatically power on, record a 30-second locked video, and then shut down after 5 seconds of inactivity. Note: Turn off parking monitor during normal driving.
  • Date/Time Setting: Access the menu to set the correct date and time. This is crucial for accurate accident forensics.
  • File Playback: In playback mode, use the Up (5) and Down (3) buttons to select files and the Confirm (OK) Button (4) to play them. Press the Menu Button (1) to exit playback mode.
  • Reversing Visual Function: If the rear camera is connected to your vehicle's reversing lights, when you shift into reverse gear, the dash cam display will automatically switch to a full-screen view of the rear camera. It will revert to the previous recording view when you shift out of reverse.
  • Night Vision: The dash cam supports night vision. Use the Night Vision On/Off Switch (15) to manually activate or deactivate the fill light for improved low-light recording.

5.3 Product Demonstration Video

Video 5.1: Newmine Dash Cam Operation Overview

This video demonstrates powering on the dash cam, navigating through its menu settings, and connecting the rear camera.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the dash cam body and lenses. Do not use abrasive cleaners or solvents.
  • Temperature: Avoid exposing the dash cam to extreme temperatures (below -40°C or above 70°C) or direct sunlight for prolonged periods, as this can damage the device and battery.
  • Storage: If not in use for an extended period, store the dash cam in a cool, dry place.
  • TF Card: Periodically format the TF card (e.g., once a month) to maintain optimal performance and prevent data corruption. Back up any important footage before formatting.

7. Troubleshooting

If you encounter issues with your dash cam, refer to the following common problems and solutions:

Problem Solution

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.