OBD2 Scanner V519

Contents

V519 Multi-Language OBD2 Scanner User Manual

Model: V519

Your comprehensive guide to operating and maintaining your V519 OBD2 Scanner for effective vehicle diagnostics.

1. Product Introduction

The V519 is a multi-functional vehicle fault diagnosis instrument that supports nine OBD II/EOBD standard protocols. It offers plug-and-play functionality, allowing for quick reading of vehicle fault information and parameters. This comprehensive diagnostic tool is designed to assist in identifying and resolving vehicle issues efficiently.

V519 OBD2 Scanner front and back view
Front and back view of the V519 OBD2 Scanner.

2. Important Safety Notes

  • Do not use abrasive cleaners to clean this product.
  • Do not allow this product to be heated or placed close to fire sources.
  • Do not expose the product to direct sunlight for a long time.
  • Do not attempt to disassemble this product or make any modifications, as it does not contain any user-serviceable repair components.
  • Do not use this product in rain or wet conditions.
  • If you do not plan to use this product for an extended period, store it in a dry environment to avoid extreme temperatures and dust.

3. Product Appearance and Function Keys

V519 OBD2 Scanner with labeled parts
V519 OBD2 Scanner with its main components and controls.
  1. Product connecting line: Used to connect to the vehicle's OBD interface.
  2. 2.8-inch color display screen: Resolution 240*320.
  3. Quick Fault Code Read: Initiates a quick read of current fault codes.
  4. I/M ready state indicator.
  5. Back/Exit button.
  6. Up button.
  7. Left button.
  8. Right button.
  9. Down button.
  10. OK/Confirmation button.
  11. Software upgrade/printing interface (Type-C port).
  12. Red indicator: Fault code is read.
  13. Orange indicator: Connection fails.
  14. Green indicator: Connection is successful.

4. Product Specifications and Accessories

4.1 Product Parameters

Attribute Value
Display Size2.8 inches
Display Resolution320x240
Communication InterfaceOBD-II
Working VoltageDC 9-16V
Operating Current48-72mA
Operating Environment Temperature-20°C to 60°C
Storage Temperature-30°C to 70°C
Item Weight0.35kg
Item Height2.4cm
Item Width8.7cm
Item Length15.5cm
MaterialABS Plastic
Power (W)3w
Voltage12v
Software UpdateNo (Upgrade via Type-C)
External Testing CertificationCE
CertificationRoHS, FCC, CE
Is Batteries IncludedNo

4.2 Product Fittings

  • V519 OBD2 Scanner Host: 1 unit
  • User Manual: 1 copy

4.3 Supported Protocols

The V519 scanner supports the following OBD II/EOBD standard protocols:

  1. SAE J1850 PWM (41.6Kbaud)
  2. SAE J1850 VPW (10.4Kbaud)
  3. ISO 9141-2 (5 baud init, 10.4Kbaud)
  4. ISO 14230-4 KWP (5 baud init, 10.4 Kbaud)
  5. ISO 14230-4 KWP (fast init, 10.4 Kbaud)
  6. ISO 15765-4 CAN (11bit ID, 500 Kbaud)
  7. ISO 15765-4 CAN (29bit ID, 500 Kbaud)
  8. ISO 15765-4 CAN (11bit ID, 250 Kbaud)
  9. ISO 15765-4 CAN (29bit ID, 250 Kbaud)

4.4 Main Functions

  • Support nine OBD II/EOBD standard protocols
  • Read automobile engine fault codes
  • Clear engine fault codes
  • Vehicle fault freeze frame data
  • I/M readiness status
  • Vehicle information display
  • Battery voltage reading
  • Mode 6 detection
  • Oxygen sensor test
  • Mode 8 detection
  • Fault code query
  • Playback function for saved data
  • Print function for diagnostic reports
  • Supports ten languages: English, German, French, Spanish, Italian, Russian, Dutch, Chinese, Japanese, Portuguese

5. Setup and Automobile Inspection

To begin, locate the special OBD interface in your car. The location of OBD interfaces varies between models. Typically, it is found in the inner panel at the lower left of the instrument panel, above the accelerator pedal. Refer to your vehicle's manual or the diagram below for common locations.

Diagram showing common OBD2 port locations and connection steps
Common OBD2 port locations and a 3-step connection guide.

Connection Steps:

  1. Insert the product's OBDII connector into the car's OBD interface.
  2. Start the vehicle's engine.
  3. Observe the indicator lights on the scanner:
    • Red light: Fault code is read, or connection fails.
    • Green light: Connection is successful.

Once connected and the green light is on, the scanner is ready for use.

6. Operating Instructions: Menu Page Introduction

After connecting the vehicle, the main page will display. Use the direction keys (Up, Down, Left, Right) and the OK button to navigate and select options.

6.1 Test Main Menu

From the main page, select the "Diagnosis" menu and press OK to enter the test function page. This menu provides access to 9 test functions.

V519 OBD2 Scanner main menu screen
Main menu of the V519 OBD2 Scanner, showing various diagnostic options.

6.1.1 Code Reading (Read DTC)

Select "Read DTC" from the main menu. The scanner will diagnose the automobile engine system and display any detected engine fault codes along with their definitions. If multiple fault codes are present, use the Up/Down/Left/Right buttons to navigate through them. Press OK or EXIT to return to the main menu.

V519 OBD2 Scanner displaying trouble codes
Example of trouble codes displayed on the V519 scanner.

6.1.2 Clear Code (Clear DTC)

Select "Clear DTC" from the main menu. A confirmation message will appear asking "Erase trouble codes! Are you sure?". Confirm your selection. After successful clearing, the vehicle's engine fault light will turn off. If clearing fails, ensure the engine is powered off and try again.

Video demonstrating how to connect the V519 scanner, read fault codes, and clear them, showing the engine light turning off.

6.1.3 Freeze Frame

The "Freeze Frame" function displays a snapshot of data recorded by the vehicle's computer at the moment an emission-related fault code was set. This data can be crucial for diagnosing the cause of the fault. Select "Freeze" from the main menu to view this information.

Parameter Value
DTCFRZEP0103
FUELSYS190.0
FUELSYS2-40
LOAD_PCT(%)0
ETC(°C)3000
SHRTFT1(%)0

6.1.4 I/M Readiness Status

The I/M (Inspection/Maintenance) Readiness function checks if the vehicle's emission monitors have completed their diagnostic cycles. This is important for emissions testing. "OK" indicates the monitor test is complete, "INC" means the monitor has not completed, and "N/A" means the vehicle does not support this monitor.

Monitor Status
MIL StatusOFF
Misfire MonitorOK
Fuel System MonOK
Comp ComponentOK
Catalyst MonOK
Htd CatalystOK

6.1.5 Vehicle Information (Vehicle Info)

This function allows you to view important vehicle identification information, such as the Vehicle ID Number (VIN), Calibration ID, and Calibration Verification Number. Ensure the key is on and the engine is off when accessing this information.

Information Type Value
Vehicle ID Number(Example: 1G1JC5444R7252367)
Calibration ID(Vehicle Specific)
Cal. Verif. Number(Vehicle Specific)

6.1.6 Data Stream (Live Data)

When you enter the "Data Stream" option, the product will read and display real-time data stream information from the automobile engine. This includes various sensor readings and operational parameters, which can be scrolled through using the navigation buttons.

Parameter Value
DTC_CNT1
DTCFRZFP00012
FUELSYS1CL
FUELSYS2CL
LOAD_PCT(%)68.2
ETC(°C)-50

6.1.7 Mode 6 (On-Board Monitoring Test)

Select "Mode 6" to enter the on-board monitoring test. This function allows you to access the results of on-board diagnostic monitoring tests for specific components/systems that are not continuously monitored. This can help identify intermittent problems or issues that haven't yet triggered a Diagnostic Trouble Code (DTC).

On-Board Monitor
Exhaust gas sensor monitor bank 1 - sensor 1
Exhaust gas sensor monitor bank 1 - sensor 2
Exhaust gas sensor monitor bank 1 - sensor 3

Within the sensor monitoring interface, you can view detailed sensor values and their status:

Sensor Monitor Sensor Value
Test value34048
Min Limit32838
Max Limit257
StatusFail
Unit---

6.1.8 Oxygen Sensor Test (O2 Sensor)

This function allows you to retrieve and view oxygen sensor monitor test results for the most recently completed tests from the vehicle's on-board computer. This helps determine if the oxygen sensors are functioning correctly.

O2 Monitor Test
O2 bank1 sensor1
O2 bank1 sensor2
O2 bank2 sensor1
O2 bank2 sensor2
O2 bank3 sensor1
O2 bank3 sensor2

Detailed Rich-lean threshold data can also be viewed:

Parameter Value
Test value0.500
Min Limit0.250
Max Limit0.000
StatusFail
UnitV

6.1.9 Mode 8 (Component Test)

The "Mode 8" function allows you to initiate a component test, such as an evaporative system leak test. This helps verify the operation of specific components or systems within the vehicle.

Component Test
Evaporative system leak test

6.2 Query the Fault Code Library (DTC Lib)

Select "DTC Lib" from the main menu. You can manually enter a fault code (e.g., P2000) using the direction keys to adjust digits. After entering the code, select "Confirm" to query its definition and understand the potential issue.

6.3 Playback (Review)

The "Review" menu allows you to access and view previously saved diagnostic data. This includes reviewing stored DTCs and recorded data streams, which can be helpful for tracking changes or intermittent issues over time.

6.4 Voltage

Select the "Voltage" option to read the current battery voltage of the detected vehicle. This provides a quick check of the vehicle's battery health.

Example Voltage Reading: 11.8V

6.5 Settings (Setup)

The "Setup" menu allows you to customize various product parameters, including language, unit of measure, display contrast, beep settings, and color scheme.

System Setup Option
Language
Unit Of Measure
Contrast
Beep
Color Scheme
About

7. Software Update

To ensure your V519 scanner has the latest features and compatibility, you can update its software:

  1. Log in to "elm327.com" to download the "V519ProductTool" software.
  2. After successfully downloading the tool, use a Type-C data cable to connect the V519 scanner to your computer.
  3. Double-click to run the "V519ProductTool" application.
  4. Within the application, select "Update Firmware".
  5. Click "Start update" and wait for the upgrade process to complete.
Screenshot of V519ProductTool software for updating firmware
Screenshot of the V519ProductTool software interface for firmware updates.

9. User Tips

  • Language Setting: If the device initially displays in a foreign language (e.g., Chinese), navigate to the "Setup" menu (often represented by a wrench icon) and select "Language" to switch to your preferred language (e.g., English, French).
  • Clearing Errors: The device is capable of clearing errors. If an error light persists after clearing, ensure the engine is off before attempting to clear again.

10. Troubleshooting

No Power/Device Not Turning On

  • Ensure the OBDII connector is securely plugged into the vehicle's OBD port.
  • Verify the vehicle's ignition is in the ON position (or engine running, depending on the function).
  • Check the vehicle's battery voltage using the scanner's "Voltage" function. If the voltage is too low (below 9V), the scanner may not power on.
  • Inspect the OBDII cable for any damage.

Connection Fails (Orange Indicator)

  • Confirm the OBDII connector is fully inserted.
  • Ensure the vehicle's ignition is ON.
  • Check if your vehicle is OBDII compliant (most vehicles manufactured after 1996 in the US, 2001 in EU for petrol, 2004 for diesel).
  • Try connecting to a different OBDII compliant vehicle to rule out a scanner issue.

Cannot Clear Fault Codes

  • Ensure the vehicle's engine is off when attempting to clear codes.
  • Some critical fault codes may require multiple attempts or professional service if the underlying issue is not resolved.
  • If the fault is still present, the code will reappear. Address the root cause of the fault before attempting to clear again.

Display Issues

  • Adjust the "Contrast" setting in the "Setup" menu.
  • If the screen is blank or frozen, try disconnecting and reconnecting the scanner.

11. Warranty and Support

We are committed to providing customers with unparalleled customer support. Please note the following conditions regarding product warranty:

Product Compatibility

The V519 OBD2 Scanner is not compatible with new energy vehicles, hybrid vehicles, and vehicle types that do not conform to the OBD2 agreement.

Disclaimer (Limited Warranty Exclusions)

The customer shall not enjoy the policy within the scope of this limited warranty if any of the following conditions are met:

  • Abnormal use, abnormal conditions, improper storage, exposure to humidity or unauthorized modification, misuse, negligence, abuse, accident, change, improper installation, or other non-fault behaviors, including damage caused by transportation.
  • Product damage caused by external reasons such as collision with objects, fire, flood, sand, dust, storm, lightning, earthquake, weather conditions, acts of God, irresistible force, battery leakage, theft, fuse breaking, or incorrect use of any power supply.

For further assistance or to view the original user manual in PDF format, please refer to the official documentation provided by the seller. A PDF version of the user manual is available here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.