BEISHI Full-Motion TV Wall Mount Bracket

1. Introduction

Thank you for choosing the BEISHI Full-Motion TV Wall Mount Bracket. This manual provides detailed instructions for safe installation, operation, and maintenance of your new TV mount. Please read this manual thoroughly before installation and keep it for future reference.

2. Safety Information

WARNING: Improper assembly or installation may result in serious injury, death, or property damage. Please read the instructions and warning information carefully before assembling or installing.

• This mount is only suitable for solid load-bearing walls. Hollow walls, frame walls, and other special walls require professional assessment and installation.
• Ensure the wall can bear the weight of the mount and your TV before installation.
• All required accessories for installation must be prepared by yourself.
• Professional installation is highly recommended. If you have any questions or confusion about the installation information, please contact the seller.
• If any product components or accessories are damaged or missing, do not attempt to assemble or install. Contact the seller for replacement parts.
• Do not use this product for any purpose other than its designed use.
• This product is designed with sliding parts. For safety reasons, please use it with caution.
• This product contains small parts which may cause suffocation if swallowed. Keep out of the reach of infants and young children.
• For safety reasons, please check the product regularly (recommended at least every three months).
• The manufacturer will not be responsible for any damage or injury caused by modifying the product yourself, improper installation, or installing it beyond the specified maximum load-bearing capacity.

3. Package Contents

Please verify that all components are present and undamaged before proceeding with installation.

Tools Required (Not Included): Spirit level, Steel tape, Phillips screw, Marking pencil, Socket wrench, Electric drill, Wrench, M10 drill bit.

4. Specifications

• Brand: BEISHI
• Model: Full-Motion TV Wall Mount
• Installation Type: Wall Mounting
• Adjustment: Full-Motion (Swivel, Tilt, Extend, Retract, Level Adjustment)
• Suitable Screen Size: 32-75 inches
• Maximum Load Weight: 110 lbs (approx. 50 kg)
• Distance to Wall: Retracts to 5.5 cm (2.16 in), Extends up to 35.1 cm (13.81 in)
• Level Adjustment: ±3°
• Tilt Range: -10° to +15°
• Swivel Range: ±45° (left and right)
• VESA Compatibility: 600x400mm, 600x300mm, 500x500mm, 500x400mm, 400x400mm, 400x300mm, 300x300mm, 300x200mm, 300x100mm, 200x200mm, 200x100mm, 100x100mm

5. Setup Instructions

Follow these steps carefully for proper installation. Professional installation is recommended.

5.1. Installation of Bracket on Solid Wall

1. Position the wall bracket on the desired location on the wall.
2. Use a pencil to mark the holes where you intend to drill. Ensure the bracket is level using a spirit level.
3. Using an electric drill, drill holes approximately 60mm deep at the marked positions.
4. Insert the wall anchors (if provided and suitable for your wall type) into the drilled holes.
5. Secure the wall bracket to the wall using the appropriate screws (M6x50mm or M10x50mm) and washers.

5.2. Installation of Hook and TV

1. Attach the TV heightening pads (G) to the back of your TV if needed, according to your TV's design.
2. Attach the hook brackets to the back of your TV using the appropriate A/B/C screws (M4x20mm, M6x20mm, or M8x20mm) and three-hole gaskets (E) or D6 gaskets (D). Ensure the screws are tightened securely.

5.3. Hanging the TV on the Panel

1. Carefully lift the TV with the attached hook brackets and align them with the wall mount panel.
2. Hook the TV onto the panel.
3. Secure the TV to the mount using the safety screws (H) to prevent accidental dislodgement.

5.4. Installation Completed

Once the TV is securely mounted, proceed to angle adjustments.

6. Operating Instructions

Your BEISHI Full-Motion TV Wall Mount allows for flexible viewing angles. Adjustments should be made carefully to avoid damage to the TV or mount.

6.1. Angle Adjustment

• Pitch Adjustment (Tilt): To adjust the TV's vertical tilt angle (-10° to +15°), loosen the side screws on the bracket, set the desired angle, and then re-tighten the screws.
• Horizontal Adjustment (Swivel): To adjust the TV's horizontal swivel angle (±45°), loosen the screw on the back of the hook, set the desired angle, and then re-tighten the screw.
• Level Adjustment: The mount allows for a ±3° level adjustment to ensure your TV is perfectly horizontal.
• Extension and Retraction: Gently pull the TV away from the wall to extend the arm, or push it towards the wall to retract it. The mount extends up to 35.1 cm (13.81 in) and retracts to 5.5 cm (2.16 in).

7. Maintenance

To ensure the longevity and safe operation of your TV wall mount, regular maintenance is recommended:

• Check all screws and connections at least every three months to ensure they are tight and secure.
• Wipe the mount with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
• Periodically check for any signs of wear or damage to the mount or its components. If any issues are found, discontinue use and contact the seller for assistance.

8. Troubleshooting

If you encounter any issues with your TV wall mount, please refer to the following common solutions:

• TV is not level: Use the level adjustment feature (±3°) to fine-tune the horizontal position. Ensure all mounting screws are securely tightened.
• Difficulty adjusting tilt/swivel: Ensure the adjustment screws for tilt and swivel are sufficiently loosened before attempting to reposition the TV. Re-tighten once the desired position is achieved.
• Mount feels unstable: Immediately remove the TV from the mount. Re-check all installation steps, especially the wall attachment and TV hook installation. Ensure the wall type is suitable and all screws are properly secured and tightened. Do not exceed the maximum load weight of 110 lbs.
• Missing parts: If any parts were missing from the package, contact the seller for replacements before attempting installation.

9. User Tips

• Always use a stud finder to locate wooden studs or ensure you are drilling into solid concrete/brick for secure wall mounting.
• Have a second person assist you when lifting and hanging the TV onto the mount to prevent injury or damage.
• Before drilling, double-check your measurements and TV height to ensure optimal viewing angle.
• Consider cable management solutions to keep your TV setup neat and tidy, and to prevent cables from interfering with the mount's movement.

10. Warranty and Support

For warranty information, technical support, or to report any issues with your BEISHI Full-Motion TV Wall Mount Bracket, please contact the seller directly through your purchase platform. Keep your purchase receipt as proof of purchase.

A PDF version of this user manual is available for download: User Manual (PDF)