1. Important Safety Information
Please read all instructions carefully before using the appliance and retain for future reference.
- The device must be charged for 2 hours before initial use.
- Always charge the device at the specified voltage (DC 5V 1A) to ensure optimal performance, prevent battery damage, and extend its service life.
- Turn off the switch after each use to ensure normal operation and preserve battery life.
- This product is NOT waterproof. Avoid contact with water.
- Ensure the clipper is turned off before cleaning or performing any maintenance.
- Avoid strong impact on this product.
- It is normal for the product to heat up during charging.
- Battery life can be affected by weather and temperature.
2. Product Overview and Package Contents
The HIENA HYN-023 is a professional-grade rechargeable hair clipper and trimmer designed for both home and barber use. It features a precision T-blade for efficient and comfortable trimming.
Package Contents:
- Hair Clipper x 1
- Cleaning Brush x 1
- USB Charging Cable (Type-C) x 1
- User Manual x 1
- Limit Comb (1mm) x 1
- Limit Comb (3mm) x 1
- Limit Comb (5mm) x 1
- Limit Comb (7mm) x 1
Product Components:
- Cutter Head (T-Blade)
- Power Switch
- LED Display Screen (for charging indication)
- Charging Port (Type-C)
3. Setup and Charging
3.1 Initial Charging
Before first use, fully charge the hair clipper for 2 hours. Connect the provided Type-C USB charging cable to the charging port on the clipper and plug the other end into a DC 5V 1A power source (e.g., laptop, power bank, car charger, or a standard USB power adapter).
The LED display will indicate charging status. Once fully charged, the device offers approximately 120 minutes of working time.
3.2 Attaching/Detaching Limit Combs
To adjust the cutting length, attach one of the four limit combs (1mm, 3mm, 5mm, 7mm) to the clipper head. Ensure the clipper is turned off before attaching or detaching combs.
Align the comb with the blade and gently push until it clicks into place. To remove, pull the comb away from the blade.
4. Operating Instructions
4.1 Power On/Off
Press the power switch to turn the clipper on. Press it again to turn it off.
4.2 Hair Trimming
The HIENA HYN-023 is suitable for wet and dry haircuts, beard shaving, and detailed carving. Its precision T-blade (0.1mm) ensures a smooth cut without pulling hair or damaging skin.
- For general hair cutting: Attach the desired limit comb (1mm, 3mm, 5mm, or 7mm) to achieve your preferred hair length. Move the clipper against the direction of hair growth.
- For beard trimming and carving: For closer trims or detailed work, you may use the clipper without a limit comb. The 0.1mm T-blade is ideal for precise lines and designs.
- Wet or Dry Use: The clipper can be used on both wet and dry hair. For best results, ensure hair is clean and detangled.
5. Maintenance
5.1 Cleaning the Clipper
Regular cleaning ensures optimal performance and hygiene. Always turn off the clipper before cleaning.
- Use the provided cleaning brush to remove hair clippings from the blade and the clipper body.
- Do not rinse the clipper under water as it is not waterproof.
- For thorough cleaning, you may carefully remove the cutter head (refer to video for guidance) and brush away any trapped hairs. Reattach securely after cleaning.
5.2 Blade Lubrication
To maintain the sharpness and smooth operation of the blades, apply a small drop of clipper oil (not included) to the blades periodically, especially after cleaning. Turn the clipper on for a few seconds to distribute the oil evenly.
5.3 Storage
Store the clipper in a cool, dry place, away from direct sunlight and moisture. Keep it out of reach of children.
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | HIENA |
| Model | HYN-023 |
| Power | 5W |
| Input Voltage | DC 5V 1A |
| Battery Capacity | 600mAh Lithium Battery |
| Charging Time | 2 Hours (120 Mins) |
| Usage Time | 160 Mins (approx. 120 Mins from other sources) |
| Noise Level | ≤ 55dB (Low Noise <60db) |
| Blade Material | Stainless Steel (T-Blade) |
| Minimum Haircut Length | Less than 0.5mm (0.1mm T-blade) |
| Length Adjustment Method | Change of nozzles (Limit Combs: 1mm, 3mm, 5mm, 7mm) |
| Power Type | Rechargeable |
| Motor Type | ROTARY |
| Target Audience | Adults |
| Functions | Wet haircut, Dry haircut, Fast Charging, Charging indication |
| Certifications | RoHs, CE, FCC |
| Origin | Mainland China |
7. Troubleshooting
If you encounter any issues with your HIENA HYN-023 hair clipper, please review the following common solutions:
- Clipper not turning on: Ensure the battery is charged. Connect the charger and check the LED indicator.
- Reduced cutting performance: Clean the blades thoroughly with the brush to remove any trapped hair. Lubricate the blades with clipper oil.
- Clipper feels hot during use: While some warmth during charging is normal, excessive heat during operation might indicate a need for cleaning and lubrication, or a prolonged usage session. Allow the device to cool down.
- Combs not attaching securely: Ensure the comb is correctly aligned with the blade and pushed firmly until it clicks.
8. User Tips
- For the cleanest lines and closest shave, use the clipper without a comb attachment.
- Always start with a longer comb length if you are unsure, and gradually reduce it until you achieve the desired length.
- To prevent hair pulling, ensure the blades are clean and well-lubricated before each use.
- When trimming beards, comb the hair in the direction of growth before trimming to ensure an even cut.
9. Manufacturer Information
Manufacturer: Yiwu HIENA Electric Appliance Co, Ltd
Production Address: No.82 Qushi Road, Beiyuan Street, Yiwu, Zhejiang Province, China
Country of Origin: Made in China
Certifications: FC, CE, RoHS