ThinkRider XXPRO

Contents

ThinkRider XXPRO Direct Drive Smart Bike Trainer User Manual

Model: XXPRO

1. Product Introduction

Thank you for purchasing the ThinkRider XXPRO Smart Bike Trainer. Please read this instruction manual carefully before use to ensure proper setup and operation.

ThinkRider XXPRO Smart Bike Trainer
ThinkRider XXPRO Smart Bike Trainer, front view.

2. Package Contents

The ThinkRider XXPRO Smart Bike Trainer package includes the following items:

  • XXPRO Smart Bike Trainer (1 unit)
  • Power adapter (1 unit)
  • 8-9-10 speed washer (1 unit)
  • Quick release adapters (Support 130/135mm)
  • Thru axle adapters (Support 142/148mm)
  • Base screws

Special Note:

The standard accessories do not include the cassette, Thru axle release, Quick release, BLE, and ANT+ USB receiver. If you require these, they can be purchased separately from your dealer.

Package Contents Diagram
Diagram illustrating the included package contents.
Accessories in packaging
Close-up of various adapters and small parts included in the packaging.

3. Setup

3.1. Trainer Installation

  1. Placement: Place the trainer on a level and sturdy surface. Ensure there are no obstacles or dangerous objects around the trainer.
  2. Base Installation: Install the base and tighten the screws to ensure the trainer is stable.
  3. Power Connection: Connect the trainer to a standard 110V-220V power outlet using the original power adapter.
  4. Cassette Compatibility: The trainer comes with a standard freehub body compatible with Shimano HG 8-12-speed cassettes and SRAM 8-11-speed road and mountain bike cassettes.
    • 11-speed standard cassettes can be installed directly.
    • 8-10-speed cassettes require a spacer. Please consult customer service for details if needed.
    • Campagnolo or SRAM XDR freehub bodies must be purchased separately.

Footing Installation

Footing Installation Diagram
Diagram showing the footing installation. The left leveling foot is shorter, and the right (drive side) is longer.

Cassette Installation

Cassette Installation Diagram
Diagram showing cassette installation. 8/9/10-speed cassettes require a spacer.

3.2. Adapters Installation

The non-drive side adapter can be inserted in different directions to suit various axle spacing sizes. Refer to the diagrams below for specific instructions.

130-135 Quick Release Adapter Installation

Quick Release Adapter Installation Diagram
Diagram for installing quick release adapters. Ensure the quick release adapter is installed.

142-148 Thru Axle Adapter Installation

Thru Axle Adapter Installation Diagram
Diagram for installing thru axle adapters. Ensure the quick release adapter is installed.

4. Operating Instructions

4.1. General Usage Caveats

  • Secure Setup: Before each use, carefully check that your quick-release lever or thru-axle is securely locked to the frame to prevent loosening during use, which could cause personal injury or property damage.
  • Moving Parts: Do not touch the moving parts of the trainer with your hands or any objects.
  • Heat Warning: After long-term use, the trainer's freewheel may become hot; do not touch it.
  • Safety Around Others: During cycling, keep children and pets away from the trainer.
  • Inertia Flywheel: Do not touch the freewheel or disassemble the bicycle while the inertia flywheel is still spinning.
  • Environment: During use, keep the trainer away from fire sources, water sources, and other obstacles.
  • Stability: Do not stand on the trainer while pedaling; avoid excessive rocking; pay attention to safety.
  • Health Considerations: Users with cardiovascular and cerebrovascular diseases or other conditions unsuitable for high-intensity exercise are strictly prohibited from using the trainer. Consult a doctor before starting or modifying any exercise training plan.
  • Responsible Use: Individuals who are not capable of responsible behavior should not use the trainer.

Disclaimer: The manufacturer is not responsible for personal and property damage caused by abnormal use of the trainer.

Official product video demonstrating the setup and use of the ThinkRider XXPRO Smart Bike Trainer, highlighting its quiet operation and realistic pedal feel.
ThinkRider XXPRO in use
A cyclist using the ThinkRider XXPRO Smart Bike Trainer with a road bike.
User's setup with a road bike
A user's setup featuring the ThinkRider XXPRO trainer connected to a road bike, ready for indoor training.
User's setup with a triathlon bike
A user's setup showing the ThinkRider XXPRO trainer integrated with a triathlon bike for indoor training.
Rear view of trainer with bike
Rear view of the ThinkRider XXPRO trainer with a bicycle mounted, showing the cassette and chain.
Trainer with bike, front view
Front view of the ThinkRider XXPRO trainer with a bicycle mounted, showcasing its compact design.
Trainer with bike, side view
Side view of the ThinkRider XXPRO trainer with a bicycle mounted, illustrating the overall setup.

5. Firmware Upgrade and Software Setting

5.1. Firmware Update

The cycling trainer's firmware can be upgraded. For firmware updates, please download the official app on your mobile phone: thinkrider tools.

Special Note:

During the upgrade process, keep your phone within 1 meter of the cycling trainer. Do not exit the upgrading interface, perform any other operations, or turn off the power of the cycling trainer until the firmware upgrade is completed.

5.2. Cycling APP Settings

This trainer is a general equipment that adapts to most standard third-party cycling software. After downloading and installing the cycling software on your cellphone or computer, switch on the power of the trainer, open the software, find the device connection interface, and search for and connect to the "cycling trainer" signal.

Smart Interaction with Cycling Apps
The trainer supports BLE and ANT+ wireless communication protocols, compatible with popular cycling apps like Zwift, Trainerroad, Rouvy, and bike computers from Garmin, Wahoo, iGPSPORT.

6. Maintenance

To ensure the longevity and optimal performance of your ThinkRider XXPRO Smart Bike Trainer, follow these general maintenance guidelines:

  • Cleaning: Regularly wipe down the trainer with a soft, dry cloth to remove dust and sweat. Avoid using abrasive cleaners or solvents.
  • Inspection: Periodically check all bolts and connections to ensure they are tight and secure.
  • Storage: When not in use, store the trainer in a dry, cool place away from direct sunlight and extreme temperatures.
  • Moving Parts: Keep the freewheel and other moving parts free from debris.

7. Troubleshooting

7.1. Connectivity Issues

Special Reminder:

  • The trainer cannot connect to a cycling app and a bike computer simultaneously, as this may cause data output and resistance to malfunction.
  • If your smart trainer cannot be found by the app, it may be due to:
    • The same smart trainer cannot be connected to two apps simultaneously.
    • If the smart trainer is already connected to an app (a solid red light indicates it is connected), the next app will not be able to find the smart trainer.

Solution: First, check and disconnect any previous connection (or unplug and restart the trainer; a flashing red light indicates a waiting connection state), and then proceed with the next app connection.

8. Specifications

FeatureSpecification
StructureSteel + Plastic
Drive TypeDirect Drive
Maximum Simulated Slope25%
Power Accuracy±1%
Maximum Resistance PowerAbout 2500 watts
Noise Level56dB
Power Supply Voltage100V-240V
Resistance TypeBLDC
Wireless ConnectionBluetooth, ANT+, WiFi (Pro and above)
Output DataPower, Cadence, Speed
Package Weight18kg
Package Size66 x 52 x 21 cm

8.1. Adaptation Instructions

  • Rim Size: Road bike: 24"/650c/700c, MTB: 24"/26"/650B/29"
  • Hub Type: 130/135QR (Standard), 12x142 and 12x148 thru axle
  • Cassette: Shimano HG specification, compatible with Shimano 8-12-speed cassettes, and SRAM 8-11-speed cassettes (XDR or CP freehub body sold separately).
  • Compatible Cycling Software: The standard protocol is compatible with most cycling software on the market, such as Zwift.
Powerful Performance Specifications
Key performance metrics: Power accuracy ±1%, Maximum slope 25%, Max power of 2500W.
Enhanced Unplugged Riding
The X-PRO's improved self-power generation efficiency provides a more authentic riding experience when unplugged.
ThinkRider XXPRO in White
The ThinkRider XXPRO Smart Bike Trainer is available in a white color variant.

9. Warranty and Support

9.1. Warranty Information

The product is guaranteed for one year from the date of purchase. If the product fails during the warranty period due to an original device quality problem or assembly process, the company will provide free maintenance and spare parts replacement.

Please use the original packing materials when you need to ship the package for warranty service.

Product damage or malfunction caused by the following reasons is not covered by the warranty:

  1. Damage caused by use or installation not in accordance with the instructions.
  2. Product damage caused by human factors or accident.
  3. Unauthorized disassembly of the product without contacting the company or dealer for confirmation.
  4. Ingress of water causing equipment failure.
  5. Aging and scratches caused by normal use.

After the expiration of the warranty period, the company will still provide maintenance services, but the corresponding maintenance costs will be charged.

9.2. Support

If you have any after-sales questions, please contact our engineers at: service2@thinkrider.com

For additional information, you may refer to the official user manual PDF: View User Manual (PDF)

10. User Tips

  • The trainer operates quietly, making it suitable for use without disturbing others.
  • The downhill feature provides a more realistic and immersive riding experience.
  • Setup and pairing with devices like Garmin and Mywhoosh are generally straightforward.
  • The trainer offers a great feel for both short and longer, more intense training sessions.
  • The built-in power meter is beneficial for structured training and analyzing performance data.
  • When installing the cassette, be aware that a special chain key might be needed. If you don't have one, a bike service shop can assist with installation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.