Sumry SP4200

Contents

Sumry SP4200 Solar Wall-Mounted Inverter User Manual

Model: SP4200

1. Product Overview

The Sumry SP4200 is a high-performance 4.2kVA/3.8kW solar inverter designed for wall-mounted installations. It converts 24V DC power from batteries or solar panels into 220V AC power for household appliances. Featuring a built-in MPPT 140A solar charger, it optimizes power harvesting from your solar array. This inverter provides a pure sine wave output, ensuring compatibility with sensitive electronics.

Sumry SP4200 Solar Inverter front and top view with display and connection ports

Figure 1: Front and Top View of the Sumry SP4200 Inverter

Sumry SP4200 Solar Inverter rear view showing AC IN/OUT, Battery, and PV IN terminals

Figure 2: Rear View with Connection Terminals

2. Safety Instructions

Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Professional Installation: Installation and wiring must be performed by qualified personnel in accordance with all applicable electrical codes and standards.
  • Disconnect Power: Always disconnect all power sources (AC utility, solar PV, and battery) before performing any wiring or maintenance on the inverter.
  • Proper Grounding: Ensure the inverter is properly grounded to prevent electric shock.
  • Ventilation: Install the inverter in a well-ventilated area to prevent overheating. Maintain adequate clearance around the unit.
  • Avoid Moisture: Do not expose the inverter to rain, snow, liquids, or excessive dust.
  • Correct Voltage: Verify that the battery voltage and PV array voltage match the inverter's specifications.
  • Overcurrent Protection: Ensure appropriate circuit breakers or fuses are installed for AC input, AC output, battery, and PV input circuits.

3. Package Contents

Upon unpacking, please ensure all items are present and undamaged. If any components are missing or damaged, contact your supplier immediately.

  • Sumry SP4200 Solar Inverter Unit
  • User Manual
  • Mounting Hardware (screws, wall anchors)
  • Communication Cable (RS232/RS485)

4. Product Features

The Sumry SP4200 inverter offers a range of features designed for efficient and reliable solar power management:

  • High Power Output: 4.2kVA / 3.8kW continuous power.
  • Pure Sine Wave Output: Provides clean and stable power suitable for all types of loads, including sensitive electronics.
  • Integrated MPPT Solar Charger: Built-in 140A MPPT charge controller maximizes energy harvest from solar panels.
  • Wide Input Voltage Range: Supports a selectable AC input voltage range (170-280VAC for personal computers, 90-280VAC for home appliances).
  • Wall-Mounted Design: Space-saving and easy to integrate into various environments.
  • LCD Display: Intuitive display for monitoring system status and configuring settings.
  • Multiple Protections: Includes circuit breaker protection for enhanced safety.
  • Communication Interface: Standard RS232/RS485 for monitoring and control, with optional GPRS/WIFI modules available.
  • Battery Compatibility: Designed for 24V battery systems, compatible with lead-acid and lithium batteries.

5. Setup

5.1. Installation Location

  • Mount the inverter vertically on a solid wall surface.
  • Ensure the installation area is dry, well-ventilated, and free from direct sunlight, heat sources, and corrosive gases.
  • Maintain at least 20 cm (8 inches) clearance around the inverter for proper airflow.
  • The operating environment humidity should be 5% to 95% Relative Humidity (Non-condensing).

5.2. Wiring Connections

All wiring must be performed by a qualified electrician. Refer to the connection diagram below and ensure all connections are secure and correctly polarized.

Sumry SP4200 Solar Inverter top-rear view showing detailed connection ports for AC IN, AC OUT, Battery, and PV IN

Figure 3: Detailed View of Connection Ports

  1. Battery Connection: Connect the 24V battery bank to the 'BATTERY' terminals. Ensure correct polarity (+ to + and - to -). Use appropriate gauge cables and fuses.
  2. PV Input Connection: Connect the solar panel array to the 'PV IN' terminals. Observe correct polarity and ensure the PV array open circuit voltage does not exceed 450VDC.
  3. AC Input Connection: Connect the AC utility grid (if applicable) to the 'AC IN' terminals. Install an external circuit breaker for protection.
  4. AC Output Connection: Connect your AC loads to the 'AC OUT' terminals. Ensure the total load does not exceed the inverter's rated power.
  5. Grounding: Connect the inverter's ground terminal to a reliable earth ground.
  6. Communication Port: Connect the RS232/RS485 communication cable to the 'COMM' port for external monitoring or BMS integration.

After all connections are made, double-check for any loose wires or incorrect polarity before powering on the unit.

6. Operating Instructions

6.1. Powering On/Off

  1. Power On: First, ensure the battery bank is connected. Then, switch on the battery breaker. Next, switch on the PV array breaker (if applicable). Finally, switch on the AC input breaker (if applicable) and then the inverter's main power switch. The LCD display will illuminate.
  2. Power Off: Reverse the power-on sequence. First, switch off the inverter's main power switch. Then, switch off the AC input breaker, followed by the PV array breaker, and finally the battery breaker.

6.2. LCD Display and Buttons

The inverter features an LCD display and control buttons (UP, DOWN, ENTER) for monitoring system status and adjusting settings. Navigate through menus using the UP/DOWN buttons and confirm selections with the ENTER button.

6.3. Basic Settings

Key settings that can be configured via the LCD include:

  • Output Voltage/Frequency: Typically 220V/50Hz or 60Hz (auto-sensing).
  • Charging Source Priority: Configure whether solar, utility, or a combination is prioritized for battery charging.
  • Load Source Priority: Set the priority for powering loads (e.g., Solar first, then Utility, then Battery).
  • Battery Type: Select the appropriate battery type (e.g., AGM, Flooded, Lithium) for accurate charging parameters.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Sumry SP4200 inverter.

  • Cleanliness: Keep the inverter clean and free from dust. Use a dry cloth to wipe the exterior. Do not use liquid cleaners.
  • Ventilation: Periodically check that the ventilation openings are not blocked. Ensure cooling fans are operating correctly.
  • Connection Checks: Annually inspect all electrical connections (battery, PV, AC input/output) for tightness and signs of corrosion. Tighten any loose connections.
  • Battery Inspection: Follow the manufacturer's maintenance guidelines for your specific battery type.
  • Environmental Conditions: Ensure the operating environment remains within specified temperature and humidity ranges.

8. Troubleshooting

If the inverter is not functioning as expected, consult the following basic troubleshooting steps. For persistent issues, contact technical support.

  • No Power/Display Off: Check all power connections (battery, AC input). Ensure battery voltage is sufficient. Verify the main power switch is ON.
  • No AC Output: Check AC output breaker. Ensure no overload condition. Verify battery voltage is above the low-voltage disconnect threshold. Check for fault codes on the LCD.
  • No Solar Charging: Check PV array connections and polarity. Ensure sufficient sunlight. Verify PV input voltage is within the MPPT operating range (55-450VDC).
  • Overload Warning: Reduce the connected load. The inverter may automatically restart after a cool-down period.
  • Overheating: Ensure adequate ventilation. Clear any obstructions from cooling vents. Reduce ambient temperature if possible.

9. Specifications

Detailed technical specifications for the Sumry SP4200 inverter are provided below. For a comprehensive overview of all models, please refer to the embedded specification table.

Detailed specification table for Sumry SP-2200, SP-3200, SP-4200, and SP-7000 models

Figure 4: Sumry Inverter Model Specifications

Sumry SP4200 Inverter Specifications
FeatureSpecification (SP4200)
Rated Power4200VA / 3800W
Input Voltage230VAC
Selectable Voltage Range170-280VAC (for personal computers), 90-280VAC (for home appliances)
Frequency Range50Hz/60Hz (Auto sensing)
AC Voltage Regulation (Batt. Mode)230VAC ± 5%
Surge Power8000VA
Transfer Time10ms (for personal computers), 20ms (for home appliances)
Wave formPure Sine Wave
Battery Voltage24VDC
Floating Charge Voltage27VDC
Overcharge Protection31VDC
Maximum Charge Current80A
MAX.PV Array Power5000W
MPPT Range @ Operating Voltage55-450VDC
Maximum PV Array Open Circuit Voltage450VDC
Maximum Charging Current110A
Maximum Efficiency98%
Dimensions (D*W*H)423 x 290 x 100 MM
Net Weight7.0 kg
Communication InterfaceRS232/RS485 (Standard), GPRS/WIFI (Optional)
Operating Environment Humidity5% to 95% Relative Humidity (Non-condensing)
Operating Temperature-10°C to 55°C
Storage Temperature-15°C to 60°C

10. User Tips

No specific user tips were available from reviews or Q&A for this product. However, general best practices for solar inverters include:

  • Regularly monitor the LCD display for any warnings or error codes.
  • Ensure your battery bank is adequately sized for your loads and solar input to maximize system efficiency and battery lifespan.
  • Consider using the communication interface for remote monitoring and data logging to track system performance.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original seller or the manufacturer directly. Keep your purchase receipt and product serial number handy for faster assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.