XIAOMI MJJMQ06YM

Contents

Mijia Hot Compress Fascia Gun H3 User Manual

Model: MJJMQ06YM | Brand: XIAOMI

1. Safety Information

1.1 Warnings

  • Do not repair, disassemble, or modify this product yourself.
  • Do not use the product while charging.
  • After charging, disconnect the power connection promptly.
  • If the product has not been used for a long time, charge it before reusing.
  • The spherical head and U-shaped head are made of silicone. If you are allergic to silicone, do not use them and consider other massage heads.
  • The device has a heating surface; users insensitive to heat must be careful when using.
  • Avoid dropping, shaking, or impacting the product. Strong impacts may damage components and cause abnormal operation.
  • Do not use continuously for a long time, as this may cause the machine surface temperature to rise or damage.
  • If the machine overheats, smokes, makes excessive beeping sounds, or shows signs of deformation or battery leakage, stop use immediately and contact after-sales service.

1.2 Contraindications

  • Do not use on the head, face, elbows, knees, spine, or other areas with minimal muscle coverage or bony prominences.
  • Do not use on the sides, front, or back of the neck to avoid damaging the carotid sinus, which could lead to syncope or cardiac arrest.
  • Do not use on fragile areas with dense nerves and blood vessels, such as the armpits, inner arms, inner clavicle, inner elbow joints, back of the knees, abdomen, kidneys, or genitals.
  • Patients with urinary diseases such as kidney stones, ureteral stones, bladder stones, urethral stones, or urinary tract infections should not use this product on the abdomen or lower torso.
  • Do not use on bruised areas, body pain, open wounds, localized heat, swelling, acute inflammation, muscle spasms, muscle tears, acute sprains, contusions, or strains.
  • If you experience fever, nausea, vomiting, muscle pain, or weakness after strenuous exercise, stop using the product and seek medical attention immediately.

1.3 Unsuitable Users

This product should not be used by minors or individuals over 80 years old to avoid accidents. If any of the following conditions apply, consult a doctor before use and use under supervision:

  • Pregnant or postpartum women.
  • Individuals over 60 years old.
  • Rhabdomyolysis syndrome.
  • Limb loss, high paraplegia.
  • Individuals with pacemakers or stents.
  • Individuals who have undergone surgery within the last 12 months.
  • Individuals with impaired sensation or mobility due to illness or age.
  • Individuals with spinal, joint, or bone abnormalities, osteoporosis, cervical spondylosis, or lumbar disc herniation.
  • Individuals with other medical conditions that may cause complications, such as neuropathy or retinal damage.

1.4 Precautions

  • The product is partially charged at the factory. It is recommended to fully charge it after unboxing before use.
  • When the machine is running, do not place fingers, hair, or other body parts near the massage head interface to avoid pinching.
  • Do not block or insert foreign objects into the massage head interface or charging port.
  • Do not immerse the product in water or other liquids.
  • Do not use the product in humid environments.
  • Use and charge the product in an environment between 5°C and 40°C.
  • Keep away from water, fire, and corrosive environments to avoid affecting battery performance.

1.5 Battery Disassembly (For Disposal Only)

Warning: Disassembling the battery will render the product unusable. The following steps are for product disposal only; do not attempt for routine maintenance.

  1. Disconnect external power, remove the product casing. Before discarding the appliance, the battery must be removed. Before removing the battery, the appliance must be disconnected from the power supply.
  2. Cut the connecting wires of the battery, motor, and NTC in sequence.
  3. Remove the battery and insulate the cut ends of the power wires separately with insulating tape.

Dispose of the battery according to local environmental laws and guidelines. Dispose of the battery safely.

2. Product Overview

2.1 Product Diagram

Mijia Hot Compress Fascia Gun H3 with various massage heads
Mijia Hot Compress Fascia Gun H3 with its included massage heads.

Key Features:

Diagram showing 7 reasons to choose Mijia Hot Compress Fascia Gun H3: Hotpower heats in 5s, 25kg thrust, 10mm deep massage, brushless motor, intelligent memory, strength indicator ring, integrated control panel.
Overview of the Mijia Hot Compress Fascia Gun H3's main features.
  • Hotpower: Rapidly heats up in 5 seconds.
  • 25kg Strong Thrust: Powerful massage to disperse soreness.
  • 10mm Deep Massage: Kinetic energy directed for deep fascia penetration.
  • Custom Brushless Motor: Provides strong and efficient power.
  • Intelligent Position Memory: Remembers your last used settings.
  • Strength Indicator Ring: Provides visual feedback on pressure.
  • Integrated Intelligent Control Panel: Easy to use interface.

2.2 Product Components

Mijia Hot Compress Fascia Gun H3 and its accessories laid out in a carrying case.
The fascia gun and its accessories, including the carrying case.

The product package includes:

  • Fascia Gun Body
  • Storage Bag
  • User Manual (this document)
  • Charging Cable (Type-C)
  • Spherical Head
  • U-shaped Head
  • Hot Compress Flat Head
  • Cylindrical Head

2.3 Massage Head Functions

  • Spherical Head: Suitable for large muscle groups such as shoulders, lower back, arms, glutes, thighs, and calves.
  • U-shaped Head: Suitable for the lower back, both sides of the spine, and calves.
  • Hot Compress Flat Head: Suitable for relaxing various muscle areas.
  • Cylindrical Head: Suitable for impacting deep tissues, such as meridians, palms, and soles of the feet.

3. Setup

3.1 Attaching Massage Heads

  • When installing the spherical, U-shaped, and cylindrical heads, insert the corresponding massage head into the massage head interface on the main unit until it is flush with the edge of the interface.
  • When installing the hot compress flat head, align the icon on the massage head with the dot on the main unit, then insert it into the massage head interface until it is flush with the edge of the interface.

Note: The red line in the diagram indicates the installation line; the actual product will illuminate this area.

3.2 Detaching Massage Heads

To detach a massage head, grasp it and pull it outwards while rotating.

Caution: Always install and detach massage heads when the device is powered off. Ensure the massage head is securely installed before powering on. Do not adjust or remove massage heads during use to avoid injury.

3.3 Initial Charging

Insert the charging cable into the charging port and connect it to a power adapter (purchased separately) to power on. The fascia gun will automatically turn off during charging and cannot be used.

Note: Use a CQC certified LPS power adapter with a rated output of 5V-2A for charging.

4. Operating Instructions

4.1 Power On/Off

  • Power On: Press and hold the function button for 2 seconds. The fixed or variable frequency mode indicator light will turn on.
  • Power Off: Press and hold the function button for 2 seconds. The fascia gun will stop working, and all indicator lights will turn off, indicating it is powered off. The device will automatically shut down after 10 minutes of continuous operation.

4.2 Intensity Level Switching

In power-on state, short press the function button to cycle through "Pause - Level 1 - Level 2 - Level 3". The intensity level indicator lights correspond to 1, 2, and 3 from left to right.

4.3 Mode Switching

In power-on state, continuously short press the function button twice to cycle between fixed frequency mode and variable frequency massage mode. The corresponding mode indicator light will be white.

  • Fixed Frequency Mode: Provides constant speed massage for efficient fascia release and rapid muscle recovery, suitable for post-exercise soreness.
  • Variable Frequency Massage Mode: Provides variable speed massage, relieving muscle tension through changes in massage rhythm, suitable for daily relaxation.

4.4 Hot Compress Function

After installing the hot compress flat head and powering on, the hot compress button will light up white. Touch the hot compress button to cycle through low, medium, and high heat levels. The indicator lights correspond to low, medium, and high from left to right. If the hot compress head is not installed or is not in good contact, the hot compress button light will turn off. If you touch the hot compress button in this state, the button light will flash several times and then turn off.

The product offers 3 heat levels to meet different user needs:

  • Low: Lower temperature, gentle and suitable for sensitive skin.
  • Medium: Moderate temperature, suitable for spring/summer hot compress.
  • High: Higher temperature, suitable for autumn/winter hot compress through clothing.

It is recommended to start with the low setting and gradually increase the level based on personal needs. When using the high heat level, it is advisable to use it through thin clothing to prevent burns.

4.5 Stall Protection & Restart

If excessive pressure is applied, the fascia gun will trigger stall protection and stop working. If a stall occurs, short press the function button within 15 seconds to restart the device. If more than 15 seconds pass, press and hold the function button for 2 seconds to restart.

4.6 Memory Function

When the device stalls or is powered off, the system automatically remembers the currently running mode and intensity level. The next time it is powered on, it will default to the mode and intensity level before the stall or power off. Fixed and variable frequency modes will remember their respective intensity levels, and switching modes may cause the intensity level to change.

4.7 Strength Indicator Ring

  • Indicator ring off: Indicates low pressure, light massage state. Adjust pressure as needed.
  • Indicator ring white: Indicates moderate pressure, normal massage state. Adjust pressure as needed.
  • Indicator ring orange: Indicates high pressure. Reduce pressure to avoid injury.

4.8 Massage Method

Apply the massage head with appropriate pressure to the muscle area that needs relaxation, and move it slowly back and forth. For areas with obvious soreness, you can appropriately increase the pressure and hold for 15-30 seconds.

4.9 Product Demonstration Video

Official product demonstration video showing various uses and features of the Mijia Hot Compress Fascia Gun H3.

5. Maintenance

5.1 Cleaning

Regularly wipe the main unit and massage heads with a clean, slightly damp soft cloth or wet wipe. Then wipe dry with a dry cloth or paper towel and store in the carrying case.

  • Do not rinse the fascia gun with water or expose it to direct sunlight.
  • When cleaning, ensure the fascia gun is powered off and not connected to power.
  • Do not use corrosive solutions to wipe the main unit, as this may cause product malfunction or cracking and discoloration.

5.2 Storage

  • Store the product in a cool, dry place.
  • Do not place in high-temperature environments above 40°C, low-temperature environments below -5°C, or near humid areas, water sources, fire, or corrosive environments, as this may affect battery performance.
  • When storing or carrying out, place it in the storage bag.
  • Avoid bumping, squeezing, dropping, throwing, or scratching the product.
  • This product is suitable for transportation by car, train, ship, and airplane. Ensure it is secured during transport.
  • If the product is not used for a long time, charge it before reusing.
  • If the main unit shows signs of high temperature, deformation, swelling, or battery leakage during storage, stop use immediately and contact after-sales service.

6. Troubleshooting

Problem Possible Cause Solution
Charging indicator light off during charging Charging cable or power adapter not connected properly Check if the charging cable and power adapter are properly connected
Battery fully charged Normal phenomenon
Refer to the two situations above. If the problem persists Contact after-sales service
Slow charging Battery temperature too high or too low Wait for the battery temperature to return to normal before charging
Power adapter output voltage or current too low Choose a CQC certified LPS power adapter with 5V-2A output for charging
Fascia gun not working Excessive pressure causes machine stall Restart the fascia gun
Battery level low or depleted Charge after use
Refer to the two situations above. If the problem persists Contact after-sales service
Motor makes abnormal noise Foreign object enters the motor Contact after-sales service
Motor malfunction Contact after-sales service
Machine temperature too high Long usage time Wait for the machine temperature to return to normal before using. Recommended single use time is no more than 10 minutes, continuous use time no more than 30 minutes.
Motor malfunction Contact after-sales service

7. Specifications

Attribute Value
Product Name Mijia Hot Compress Fascia Gun H3
Product Model MJJMQ06YM
Product Size 146 x 64 x 200mm
Net Weight Approx. 837g
Battery Capacity 2450mAh
Rated Input 5V-2A
Charging Interface Type-C
Battery Type Lithium Battery
Working Temperature 5°C ~ 40°C
Certification CE

8. User Tips

  • The hot compress function heats up quickly. Ensure to select the appropriate temperature level (low, medium, high) based on your comfort and skin sensitivity.
  • For optimal relaxation, combine the hot compress function with the massage. The heat helps promote blood circulation and relax tense muscles, making the massage more effective.
  • The device has a memory function, so it will remember your last used mode and intensity. This can save time during subsequent uses.
  • When using the hot compress flat head, if the button light flashes, it indicates poor contact. Re-adjust the head to ensure proper connection.
  • The strength indicator ring is a useful visual guide. If it glows orange, reduce pressure to prevent muscle damage.

9. Warranty and Support

9.1 Warranty Content

Type Warranty Item Warranty Period
Main Unit Fascia Gun Body 1 Year
Accessories Charging Cable 1 Year
Consumables Massage Heads, Storage Bag No Warranty

Warranty Policy:

  • Within 7 days from the date of receipt: If the product exhibits performance faults listed in the "Mijia Hot Compress Fascia Gun H3 Performance Fault Table" and is confirmed by Xiaomi after-sales service, you can enjoy free return or replacement services.
  • Within 8-15 days from the date of receipt: If the product exhibits performance faults listed in the "Mijia Hot Compress Fascia Gun H3 Performance Fault Table" and is confirmed by Xiaomi after-sales service, you can enjoy free replacement or repair services.
  • Within 12 months from the date of receipt: If the product exhibits performance faults listed in the "Mijia Hot Compress Fascia Gun H3 Performance Fault Table" and is confirmed by Xiaomi after-sales service, you can enjoy free repair services.

9.2 Non-Warranty Conditions

  • Repairs, misuse, collision, negligence, abuse, liquid ingress, accidents, alterations, or improper use of non-product accessories without authorization, or tearing/altering labels and anti-counterfeit marks.
  • Exceeded the three-guarantee period.
  • Damage caused by force majeure.
  • Product performance faults not listed in the "Mijia Hot Compress Fascia Gun H3 Performance Fault Table".
  • Product and its accessories performance faults caused by human factors.

9.3 Performance Fault Table for Mijia Hot Compress Fascia Gun H3

Product Name Performance Faults
Mijia Hot Compress Fascia Gun H3 Cannot power on/off.
Gear display abnormal, but functions normally.
Mode display abnormal, but functions normally.
Charging process, power indicator light does not light up.
Button failure.
Cannot charge.
Hot compress function failure.

9.4 Important Notes

  • To ensure safe product transportation, it is recommended to keep the packaging box for at least 30 days from the date of receipt.
  • This product is only sold in mainland China (excluding Hong Kong, Macau, and Taiwan regions). Therefore, after-sales service is only provided in mainland China (excluding Hong Kong, Macau, and Taiwan regions). This warranty policy is only applicable to mainland China (excluding Hong Kong, Macau, and Taiwan regions).
  • Due to structural design reasons, repair services for this product are provided by replacement.

9.5 PDF User Manual

A detailed user manual in PDF format is available for download: Mijia Hot Compress Fascia Gun H3 User Manual (PDF)

© 2024 Xiaomi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.