INSE S9X

Contents

INSE S9X Cordless Vacuum Cleaner User Manual

Model: S9X

1. Important Safety Instructions

Please read all instructions carefully before using the appliance and keep them for future reference.

  • Do not place the vacuum cleaner near heat sources, radiation, or lit cigarettes.
  • Do not use the appliance to remove the following objects:
    1. All liquids such as water and solvents.
    2. Lime, cement, ash, and other dust and construction debris.
    3. Hot objects, such as cigarette butts.
    4. Sharp debris, such as glass shards.
    5. Flammable or explosive items, such as gasoline or alcohol products.
  • Do not let children play with or use the vacuum cleaner to avoid accidents.
  • Your vacuum cleaner is an electrical appliance: it must not be used improperly.
  • Do not leave the vacuum cleaner running unattended.
  • The appliance must be switched off during cleaning, maintenance, or storage.
  • Do not pull on the power plug to turn off the vacuum cleaner. Hold the plastic part of the plug to remove it from the power outlet.
  • The power supply voltage must match the charging voltage of the vacuum cleaner.
  • To prevent fires, do not immerse vacuum cleaners in water or expose them to heating appliances.
  • Do not drag the power cord when moving the charging station.
  • In the following cases, do not use the vacuum cleaner and send it immediately to the nearest authorized service center:
    • The vacuum cleaner has fallen and been damaged.
    • The power cord is damaged.
  • Stop using the vacuum cleaner if the suction inlet is blocked to prevent damage (such as overheating) to the motor or deformation of the plastic part of the vacuum cleaner caused by motor overheating.

2. Product Overview and Parts List

Familiarize yourself with the components of your INSE S9X vacuum cleaner.

Product Diagram

INSE S9X Cordless Vacuum Cleaner with all parts

Image: INSE S9X Cordless Vacuum Cleaner showing main unit, attachments, and key features.

Parts List

  • Retractable Metal Tube x1
  • Main Motor x1
  • Motorized Cleaning Brush x1
  • Wall Mount x1
  • Adapter x1
  • Soft Roller Brush x1
  • V-shaped Rubber Brush x1
  • Battery x1
  • Long Crevice Tool x1
  • 2-in-1 Brush x1
  • 2-in-1 Cleaning Gadget x1
  • HEPA Filter x1
  • User Manual x1
  • User Guide x1

3. Setup and Assembly

Assembly and Combination

Ensure each part clicks into place securely to prevent air circulation issues or malfunctions.

  1. Attach the Dust Bin to the Main Motor: Align and push until it clicks.
  2. Attach the Retractable Metal Tube: Connect one end to the main motor and the other to the desired brush head (motorized cleaning brush, soft roller, or V-shaped rubber brush).
  3. Attach Accessories: For handheld use, connect the long crevice tool or 2-in-1 brush directly to the main motor.

Filter Installation

  1. Insert the cyclonic filter into the main filter housing, aligning with the lock position.
  2. Place the HEPA filter into the strainer.
  3. Ensure the dust bin notch fits perfectly into the slot.
  4. Rotate the dust bin to secure it.
  5. Rotate the filter to fix it onto the main motor.

Wall Mount Installation

The wall mount provides convenient storage and charging.

  1. Clean the wall surface where you intend to install the mount.
  2. Peel off the adhesive backing from the wall mount and firmly attach it to the wall.
  3. For added security, drill two holes through the designated spots on the mount.
  4. Insert plastic anchors into the drilled holes.
  5. Screw the wall mount firmly to the wall using the provided screws.

4. Operating Instructions

Charging the Battery

Fully charge the battery before first use. Use only the original charger. A full charge takes approximately 4 to 4.5 hours. The vacuum cannot be operated while charging for safety reasons.

Charging Methods:

  • Method 1 (Wall Mount Charging): Insert the power plug into the charging port on the wall mount. Connect the adapter to a power source. The vacuum cleaner can be stored and charged simultaneously.
  • Method 2 (Detachable Battery Charging): Remove the battery from the main unit. Insert the power plug directly into the battery's charging port. Connect the adapter to a power source.

Charging Indicators:

The battery indicator lights show the amount of electricity during charging. The light turns off after about an hour when fully charged.

Battery LevelRing Light Color
0-39%Red
40%-69%Purple
70%-100%Blue

Power On/Off and Mode Switching

The INSE S9X features an intelligent LED display and multiple suction modes.

Power Switch:

  • Press the power switch once to turn on the vacuum cleaner (starts in Auto Mode).
  • Press the power switch twice to turn off the vacuum cleaner.

Suction Modes:

The vacuum cleaner offers four suction modes: Auto, Eco, Medium, and Max. You can cycle through these modes by pressing the mode switch button.

Smart Cleaning Modes: Strong, Standard, Eco

Image: Smart Cleaning Modes (45000pa Strong, 35000pa Standard, 25000pa Eco).

  • Auto Mode: The vacuum automatically adjusts suction power (13-30kPa) based on the detected debris level. This may take a few seconds as dust needs to enter the main motor to trigger the infrared sensor.
  • Eco Mode: Press the mode switch once. (Approx. 55 minutes runtime)
  • Medium Mode: Press the mode switch twice. (Approx. 25 minutes runtime)
  • Max Mode: Press the mode switch three times. (Approx. 13 minutes runtime)

LED Display:

The LED screen clearly shows battery level and current suction mode in real-time.

LED Display showing battery percentage and color codes

Image: Intelligent LED Display showing battery percentage and corresponding ring light colors (Blue 75-100%, Purple 40-74%, Red 0-39%).

Cleaning Features:

  • 2-in-1 Floor & Carpet Brush: Adapts to different floor types for deep cleaning.
  • Edge Cleaning: Designed to effectively pick up dust from corners and edges.
  • Flexible Rotating Brush Head: Allows for easy maneuverability around furniture.
  • LED Searching Lights: Illuminates dark corners and under furniture for thorough cleaning.
  • Long Crevice Tool: Ideal for narrow spaces, crevices, and between sofa cushions.
  • 2-in-1 Brush: Versatile tool for dusting blinds, keyboards, and delicate surfaces.
  • Retractable Metal Tube: Adjustable length suitable for different heights and reaching high areas like curtains.

Video: Demonstration of INSE S9X features including cleaning various surfaces, LED display, attachments, and charging methods.

5. Maintenance and Cleaning

Emptying the Dust Bin

Empty the dust bin after each use or when the debris level reaches the 'Max' line.

  1. Press the dust bin release button.
  2. Open the bottom cover of the dust bin to empty debris directly into a trash can.

Cleaning the Filtration System

The INSE S9X features a 5-stage fully-sealed filtration system.

5-Stage High-efficiency Filtration System diagram

Image: Diagram of the 5-Stage High-efficiency Filtration System: High Density Sponge, HEPA Filter, Strong Cyclone Separator, Cyclonic Cone, Stainless Steel Strainer.

  1. Remove the Dust Bin: Press the release button and twist to detach the dust bin from the main motor.
  2. Remove Filters: Twist to remove the strainer, then pull out the cyclonic separator and HEPA filter.
  3. Clean Components:
    • HEPA Filter: Tap gently to remove dust. Do NOT wash the HEPA filter with water. Use the 2-in-1 cleaning gadget to brush off dust.
    • Washable Filters (Strainer, Cyclonic Separator): Rinse these components under cold running water until clean.
  4. Dry Thoroughly: Ensure all washable components are completely dry before reassembling. Do not use the vacuum cleaner without all filters properly installed and dry.

Replacing the Brush Roll

The vacuum cleaner comes with two brush rolls: a soft roller for hard floors and a V-shaped rubber brush for carpets.

  1. Turn the brush head upside down.
  2. Press the brush roll release button and slide out the current brush roll.
  3. Insert the desired brush roll (soft roller or V-shaped rubber brush) into the brush head until it clicks into place.

6. Troubleshooting

If you encounter any issues, please refer to the table below. If the problem persists, contact customer support at help@inselife.com.

ProblemPossible CauseSolution
Machine does not workBattery low or no powerUse the original adapter to fully charge the battery (4-4.5 hours).
Accessory blockedCheck and remove any blockages from accessories. Clean all filters.
No suction powerDust bin fullEmpty the dust bin after each use.
Filters cloggedClean all filters and ensure they are completely dry. Replace HEPA filter if it can no longer filter dust.
Accessory blockedCheck and remove any blockages from accessories.
Brush roll stops rotatingBrush roll tangledThe color breathing light turns red and the brush roll alert light appears. Remove any tangles.
Problem with metal tube or motorized brush headContact customer service.
Abnormal soundAccessory blockedCheck and remove any blockages from accessories.
Problem with main motor or motorized duck headContact customer service.
LED Display Error Codes
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.