CETANT PL230

Contents

Nordic LED Wood Ultrathin Ceiling Lamp

Model: PL230 | Brand: CETANT

1. Introduction

Thank you for choosing the CETANT Nordic LED Wood Ultrathin Ceiling Lamp. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Nordic LED Wood Ultrathin Ceiling Lamp installed in a modern room

The Nordic LED Wood Ultrathin Ceiling Lamp in a contemporary setting.

2. Safety Information

  • Always cut off the power supply or close the main circuit breaker before installation, maintenance, or cleaning.
  • Installation should be performed by a qualified electrician to ensure safety and compliance with local electrical codes.
  • Do not place the lamp in flammable or humid environments.
  • Ensure the voltage supply matches the lamp's operating voltage (90-260V).
  • Do not modify the lamp or its components.
  • Keep packaging materials out of reach of children.

3. Package Contents

Please check that all parts are present and undamaged before installation:

  • LED Ceiling Lamp (with integrated LED bulbs)
  • Mounting Bracket
  • Screws and Wall Plugs (Rubber Plugs)
  • Acrylic Cover
  • Instruction Manual

4. Specifications

AttributeSpecification
Model NumberPL230
Brand NameCETANT
Item TypeCeiling Lights
Installation MethodSurface mounted, Self-Contained
MaterialWood, Acrylic
Light SourceLED bulbs (integrated)
Bulbs IncludedYes
DimmableNo
Voltage90 - 260 V (AC)
Working Power36W
Luminous Flux249-2000 Lumens
Lighting Area5-10 square meters
Number of Light Sources> 20
TechnicsPainted
StyleEurope
ApplicationKitchen, Dining Room, Bedroom, Foyer, Study, Bathroom, Exhibition Hall, Corridor, Balcony
FeaturesThin design
CertificationCCC, CE, PSE, ROHS
Sizes AvailableD23cm*H4.5cm, D30cm*H4.5cm, D40cm*H4.5cm

Detailed Components:

  • PMMA Lampshade: Thin and translucent, offering good light transmittance, uniform luminescence, and heat dissipation. It provides soft, non-glaring light and is convenient for cleaning.
    Close-up of the PMMA lampshade, highlighting its thin and translucent properties
  • Wooden Frame: Constructed from wood, providing a natural and aesthetic finish.
    Detail of the wooden frame of the ceiling lamp
  • LED Lens Beads: High-quality LED light sources for efficient and bright illumination.
    Close-up of the LED lens beads, showing the light source technology

Size Example (23cm model):

Diagram showing the dimensions (D23cm*H4.5cm) and specifications for the 23cm model

Dimensions and specifications for the 23cm diameter model.

5. Installation (Setup)

Important: Ensure the power supply is OFF at the main circuit breaker before beginning installation.

  1. Mark Drilling Positions: Hold the mounting bracket against the ceiling at the desired installation location and mark the drilling points with a pencil.
  2. Drill Holes: Drill holes at the marked positions in the ceiling.
  3. Insert Wall Plugs: Insert the provided rubber wall plugs into the drilled holes. Tap gently with a hammer if necessary to ensure they are flush with the ceiling surface.
  4. Fix Mounting Bracket: Use a screwdriver to securely fix the mounting bracket to the ceiling with the screws.
  5. Connect Wiring: Connect the live wire, ground wire, and neutral wire from your ceiling electrical box to the corresponding terminals on the lamp's connector. Ensure all connections are secure.
  6. Mount Lamp Body: Attach the lamp body to the fixed mounting bracket.
  7. Install Acrylic Cover: Securely install the acrylic cover onto the lamp body.
Detailed installation diagram for the ceiling lamp

Visual guide for the installation procedure.

6. Operation

Once installed, restore power to the circuit. The lamp can be operated using a standard wall switch connected to the circuit. As this model is not dimmable, it will provide full illumination when switched on.

An installed ceiling lamp, showcasing its appearance in a room

The lamp provides bright, uniform light for daily use.

7. Maintenance

  • Cleaning: To clean the lamp, ensure the power is off. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or acrylic cover. The smooth surface of the PMMA lampshade makes cleaning convenient.
  • Bulb Replacement: The LED bulbs are integrated and not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.
  • Inspection: Periodically check the lamp for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

8. Troubleshooting

ProblemPossible CauseSolution
Lamp does not light upNo power supply, loose wiring, faulty switchCheck circuit breaker, ensure wiring is secure, test switch functionality.
Light flickersUnstable power, loose connectionEnsure stable power, check all electrical connections.
Insufficient illuminationIncorrect lamp size for room, dust on lampshadeVerify lighting area specifications, clean the lampshade.

9. User Tips

  • Easy Assembly: Users have noted the lamp is easy to assemble, making installation straightforward.
  • Aesthetic Appeal: The lamp is praised for its beautiful light output and modern design, enhancing room aesthetics.

10. Warranty & Support

This CETANT LED Ceiling Lamp comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For further assistance, technical support, or detailed information, you may refer to the comprehensive user manual available in PDF format:

View User Manual (PDF)

Please contact your retailer or the manufacturer's customer service for any warranty-related inquiries or support needs.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.