Introduction
Thank you for purchasing the BALASHOV H09 Portable Cooler. This manual provides essential information for the safe and efficient operation of your device. Please read it carefully before use and keep it for future reference.

Figure 1: BALASHOV H09 Portable Cooler - Overview
Safety Precautions
Please read and follow these safety instructions carefully to prevent injury or damage to the device.
- Before first use, inspect the product and power cord for any damage. Do not use if damaged.
- Do not disassemble, modify, or attempt to repair the device yourself.
- Keep the device away from fire, heat sources, and direct sunlight to prevent fire or explosion.
- Keep out of reach of children and pets.
- Use only a 5V/1A charger and the provided standard Type-C charging cable.
- Do not insert fingers or any objects into the air inlet or outlet to avoid injury or damage to the fan blades.
- If any abnormalities (e.g., unusual noise, smell, overheating) occur during operation, stop using the device immediately and contact support.
- Do not use the device if the battery shows signs of bulging, leakage, or damage.
- Do not immerse the device in water or other liquids.
- Dispose of the device and its battery according to local regulations for electronic waste.
Product Overview
Familiarize yourself with the components of your BALASHOV H09 Portable Cooler.

Figure 2: Product Illustration and Components (Refer to English section of the manual image)
- 1. Air Outlet
- 2. Superconducting Cooling Plate
- 3. Cooling Display (Snowflake Icon)
- 4. Power Switch (Slide)
- 5. Charging Display (Battery Icon)
- 6. Fan Button (+)
- 7. Cooling Button (Snowflake)
- 8. Decrease Button (-)
- 9. Lanyard Hole
- 10. Type-C Charging Port
Setup
Charging the Device
- Connect the provided Type-C USB cable to the charging port on the fan.
- Connect the other end of the USB cable to a 5V/1A USB power adapter (not included) or a computer USB port.
- The charging display (battery icon) will show a flashing green light during charging.
- Once fully charged, the green light will remain solid.
- A flashing red light indicates low battery. If the device is forced on with no battery, a red light will flash for 3 seconds before shutting down.
Note: The cooling function cannot be activated while the fan is charging. The maximum fan speed during charging is limited to gear 20 (adjustable downwards only).

Figure 3: High-capacity 5200mAh battery for extended use.
Attaching the Lanyard
Thread the included lanyard through the lanyard hole located at the bottom of the handle for convenient carrying.
Operating Instructions
Power On/Off
- To power on: Slide the power switch upwards. The LED display will show the current fan speed (e.g., "10") and then turn off automatically after 20 seconds of inactivity.
- To power off: Slide the power switch downwards to turn off all functions.
Adjusting Fan Speed
- When the fan is on, press the Fan Button (+) once to activate fan speed 10.
- Press the Fan Button (+) again to increase the wind speed by 1 gear at a time.
- Press the Decrease Button (-) to reduce the wind speed by 1 gear at a time.
- To quickly adjust to maximum speed (gear 100), long-press the Fan Button (+). The display will show the corresponding gear.
- The fan has 100 levels of stepless speed adjustment.
Using the Cooling Function (Ice Compress)
- With the fan powered on, press the Cooling Button (Snowflake) once to activate the semiconductor refrigeration. The snowflake icon on the display will light up.
- Press the Cooling Button (Snowflake) again to deactivate the cooling function. The snowflake icon will turn off.
- The ice porcelain refrigeration system provides a rapid cooling effect within 2 seconds.

Figure 4: Semiconductor refrigeration plate for instant cooling.
Battery Life Reference
The actual battery life may vary based on usage conditions and selected modes.

Figure 5: Battery Endurance in Different Modes
| Mode | Fan Only | Fan + Refrigeration |
|---|---|---|
| 10% Wind | 12 Hours | 5 Hours |
| 50% Wind | 8 Hours | 4.5 Hours |
| 100% Wind | 5 Hours | 3 Hours |
Maintenance and Care
- Cleaning: Use a soft, dry cloth to wipe the exterior of the fan. Do not use abrasive cleaners, solvents, or immerse the device in water.
- Storage: When not in use for extended periods, store the fan in a cool, dry place away from direct sunlight. Ensure the battery is partially charged (around 50%) before storage to prolong its lifespan.
- Battery Care: To maximize battery life, avoid fully discharging the battery frequently. Recharge the device when the low battery indicator appears.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | Battery is depleted Power switch is off Device malfunction | Charge the device fully Slide power switch to "on" position Contact customer support |
| Cooling function not working | Device is charging Cooling function is off Device malfunction | Disconnect from charger Press the Cooling Button (Snowflake) to activate Contact customer support |
| Fan speed cannot be adjusted upwards during charging | This is normal operation | During charging, fan speed is limited to gear 20 and can only be decreased. |
| Short battery life | Using high fan speed and/or cooling function continuously Battery degradation | Refer to battery life chart and adjust usage Battery replacement is not user-serviceable; contact support if battery life significantly degrades within warranty. |
Specifications
| Feature | Detail |
|---|---|
| Product Name | Handheld Fan |
| Model | H09 |
| Power | 12W |
| Net Weight | 256g |
| Battery Voltage | 3.7V |
| Battery Capacity | 5200mAh |
| Product Dimensions | 180 x 56 x 76 mm |
| Materials | ABS, Semiconductor, Stainless Steel, Electronic Components |
| Fan Gears | 1-100 (Stepless Adjustment) |
| Cooling Mode | 1 Gear (Semiconductor Refrigeration) |
| Input Voltage/Current | 5V/1A |
| Operating Voltage/Current | 5V/2.8A |
User Tips
Based on feedback from other users, here are some tips to enhance your experience:
- Effective Cooling: Many users report that the semiconductor cooling plate provides a noticeable and rapid cooling sensation, especially when held close to the skin.
- Quiet Operation: The fan is generally considered quiet, even at higher speeds, thanks to its silent brushless motor design.
- Battery Management: To extend usage time, cycle the fan and cooling functions on and off as needed. The 5200mAh battery offers substantial endurance.
- Wind Speed Adjustment: If you find the wind speed too high, remember you can long-press the cooling button to quickly reduce the fan speed to a lower setting.
- Portability: Its compact size makes it ideal for outdoor activities like hiking and camping.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's policy or contact the point of purchase. Do not attempt to repair the device yourself, as this may void your warranty.
Battery Replacement: The lithium battery in this device is not user-replaceable. Battery replacement should only be performed by the manufacturer or a qualified service provider. Unauthorized battery replacement may lead to safety hazards and will void the warranty.
Disposal: This product contains a lithium-ion battery. Please dispose of the device and its battery responsibly at designated collection points for electronic waste, in accordance with local regulations, to protect the environment.