BEISHI Mobile Rolling TV Stand User Manual

Introduction

Thank you for choosing the BEISHI Mobile Rolling TV Stand. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new TV stand. Please read all instructions carefully before assembly and retain this manual for future reference.

Image: The BEISHI Mobile Rolling TV Stand, black version, supporting a large television in a modern living room setting.

Important Safety Information

• Professional Installation Recommended: When installing the bracket, it is highly recommended to have professionals use appropriate safety devices and tools. Improper installation may cause the TV to fall, leading to serious personal injury or property damage.
• Weight Capacity: Before installation, ensure that the support surface can safely bear the combined weight of the TV stand, your television, and all accessories placed on the shelves. Do not exceed the maximum load weight of 100 kg (220 lbs).
• Small Parts Warning: This product contains small parts that may cause suffocation if swallowed. Keep all parts out of reach of children during assembly and use.
• Indoor Use Only: This product is designed for indoor use only. Using it outdoors may lead to product damage and personal injury risks.

Specifications

Image: Detailed product information and dimensions diagram for the TV stand.

Setup and Assembly

Before beginning assembly, ensure you have all components and tools listed. Refer to the diagram below for a visual guide to the parts and assembly steps. A PDF version of the user manual with detailed diagrams is available for reference: View User Manual (PDF)

Included Accessories:

• Left support leg (x1)
• Right support leg (x1)
• Pulley (x4)
• Crossbar (x3)
• Lower Wooden Board (x1)
• Left column (x1)
• Right pillar (x1)
• Put on wooden board (x1)
• Hook (x2)

Screw and Tool List:

Bracket Screw Accessories:

• M8x70mm (A) (x4)
• M8 self-tapping screws (B) (x8)
• M8x20mm (C) (x6)
• M6x10mm (D) (x6)
• M8 flange nut (E) (x4)
• M10 nut (F) (x4)
• D8 gasket (G-1) (x22)
• D6 gasket (G-2) (x4)

TV Screw Accessories (Choose based on your TV's requirements):

• M4x18mm (H-1) (x4)
• M5x18mm (H-2) (x4)
• M6x18mm (H-3) (x4)
• M8x18mm (H-4) (x4)
• 5mm height increase pad (H-5) (x4)
• 10mm height increase pad (H-6) (x4)

Tools:

• 5MM wrench (I-1) (x1)
• 4MM wrench (I-2) (x1)
• Open end wrench (I-3) (x1)

Image: Comprehensive assembly diagram showing all parts and steps for the TV stand.

Assembly Steps:

1. Installation of Support Legs and Pulleys:
   Using M10 nuts (F) and the open-end wrench (I-3), screw the four pulleys into the holes at the bottom of the support legs. Tighten them securely with the nuts.
2. Installation of the Upper Column:
   Attach the left and right columns to the left and right support legs respectively. Use M8x70mm screws (A), M8 flange nuts (E), and D8 gaskets (G-1) with the 5MM wrench (I-1). Do not fully tighten the screws at this stage; wait until the crossbars and wooden boards are installed.
3. Installation of Crossbars:
   Insert the three crossbars into the grooves of one upright. Secure them with M8x20mm screws (C) and D8 washers (G-1) using the 5MM wrench (I-1). Then, attach the other upright to the crossbars, securing with screws and washers. Once all crossbars are in place, fully tighten all screws from Step 2 and Step 3.
4. Installation of Wooden Boards:
   Using M8 self-tapping screws (B) and D8 washers (G-1) with the 4MM wrench (I-2):
   
   • Step 1: Place the lower wooden board onto the lower bracket of the support legs and secure it from the outside with screws and washers.
   • Step 2: Secure the upper wooden board to the uprights, fixing it from the side with screws and washers.
5. Installation of the Hook (TV Mount):
   Attach the two hooks to the TV mount. Depending on your TV's VESA pattern and desired height, choose the appropriate TV screw accessories (H-1 to H-4) and D8 gaskets (G-1). If needed, use 5mm or 10mm height increase pads (H-5, H-6) between the hook and the TV, especially when using longer screws. Ensure screws are not too short or too long for your TV.
6. Install the Safety Screws:
   
   • Step 1: Carefully hang your TV onto the installed TV mount hooks. Adjust the TV to your desired height.
   • Step 2: Secure the TV to the hooks using the M6x10mm safety screws (D) and the 4MM wrench (I-2) to prevent accidental dislodgement.

Image: All components of the TV stand laid out on the floor, ready for assembly.

Image: The white TV stand frame partially assembled, showing the main structure before the TV is mounted.

Operating Instructions

Moving the TV Stand:

The BEISHI Mobile Rolling TV Stand is equipped with mute wheels for easy relocation. To move the stand, gently push it to your desired location. Ensure the path is clear of obstacles and the floor surface is even to prevent tipping. For stability, engage the wheel locks once the stand is in its final position.

Adjusting TV Height:

The TV mount allows for height adjustment between 1235mm and 1435mm. To adjust the height, loosen the screws securing the TV mount to the vertical columns, slide the TV mount to the desired height, and then securely tighten all screws. Always ensure the TV is level and stable after adjustment.

Using the Shelves:

The stand features two shelves for media devices, soundbars, or other accessories. Distribute weight evenly on the shelves and do not exceed their individual weight capacity to maintain stability.

Image: The black BEISHI Mobile Rolling TV Stand fully assembled with a TV and various media devices on its shelves.

Maintenance

• Regular Inspection: Periodically check all connections between the bracket and the TV, as well as all screws, to ensure they remain firm and undamaged from long-term use.
• Component Replacement: If any safety hazard is identified due to loose or damaged components, immediately replace the affected accessories or reinforce the installation.
• Cleaning: Clean the stand with a soft, dry cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the finish.

Troubleshooting

• Stand is Unstable:
  Ensure all assembly screws are fully tightened. Verify that the TV's weight and VESA pattern are within the stand's specifications. Make sure the stand is placed on a flat, level surface. Engage the wheel locks to prevent unwanted movement.
• Difficulty Moving the Stand:
  Check if the wheel locks are disengaged. Ensure the wheels are free of debris. If the wheels are damaged, they may need replacement.
• TV Not Level:
  Re-check the TV mount installation. Ensure the hooks are evenly positioned and securely fastened to the TV and the stand. Adjust the height carefully, ensuring both sides are at the same level before tightening.
• Missing Parts:
  If any parts are missing upon unboxing, please contact the seller immediately for assistance.

User Tips

• The stand is noted for its sturdy construction and durable mute wheels, making it reliable for large TVs.
• While the MDF shelves are sturdy, avoid placing excessively heavy items on them for prolonged periods to prevent potential sagging.
• The stand is well-suited for TVs around 65 inches and larger, providing excellent support.

Frequently Asked Questions (FAQ)

Q: What TV sizes are compatible with this stand?

A: This stand is designed to accommodate TVs ranging from 50 to 100 inches.

Q: What is the maximum weight capacity?

A: The stand can support a maximum load weight of 100 kg (220 lbs).

Q: Are the wheels lockable?

A: Yes, the mute wheels are equipped with locks to secure the stand in place.

Q: Can the TV height be adjusted?

A: Yes, the TV mount allows for height adjustment between 1235mm and 1435mm.

Warranty and Support

For any questions, concerns, or support regarding your BEISHI Mobile Rolling TV Stand, please contact the seller directly through your purchase platform. Please refer to your purchase documentation for specific warranty terms and conditions, as these may vary by region and seller.

For detailed assembly diagrams and instructions, you can also refer to the official user manual PDF: View User Manual (PDF)