Bonacell Wii Remote Controller User Manual

1. Product Description

This Bonacell Wii Remote Controller is designed for use with Nintendo Wii, Wii U, and Wii Mini game consoles. It utilizes a Bluetooth module for wireless communication with the console. The controller features a built-in CMOS sensor to detect infrared rays and output position information, and a sound module for audio feedback. It also incorporates a G-Sensor (accelerometer) to detect movement and tilt, and a MotionPlus gyro sensor for precise real-time rotation and force detection, enhancing interactive gameplay.

The controller provides vibration feedback through its built-in motors and sound output via an 8 ohm 0.5W speaker. It also includes an expansion unit connection terminal for compatible peripherals like the Nunchuk.

2. Package Contents

Please check the package to ensure all items are present:

• Wii Controller (Remote) x 2
• Nunchuk x 2
• Silicone Case x 2
• Lanyard x 2

3. Controller Layout and Functions

The Bonacell Wii Remote Controller features the following buttons and components:

• Front Buttons: Power, Cross Key (Up, Down, Left, Right), A, +, Home, -, 1, 2.
• Back Button: B, Register.
• Indicator Lights: Four indicator lights show the player number.
• Motion Sensor: Detects changes in the controller's stereo tilt.
• MotionPlus: Gyro sensor for real-time rotation direction and force detection.
• CMOS Sensor: Detects infrared light from the Sensor Bar for movement information.
• Vibration Motor: Provides tactile feedback during gameplay.
• Speaker: Provides sound output (8 ohm 0.5W).
• Expansion Terminal: For connecting Nunchuk and other compatible peripherals.

4. Setup Instructions

4.1. Battery Installation

1. Open the battery compartment cover on the back of the Wii Remote.
2. Insert two (2) AA alkaline batteries (not included), ensuring correct polarity.
3. Close the battery compartment cover securely.

4.2. Connecting to the Console (Syncing)

1. Ensure your Wii/Wii U console is powered on.
2. Press the "SYNC" button located inside the battery compartment of the Wii Remote.
3. Press the "SYNC" button on your Wii/Wii U console. The location of the console's SYNC button may vary by model (often behind the battery cover or a small flap).
4. The indicator lights on the Wii Remote will flash and then one or more lights will remain solid, indicating a successful connection.
5. Troubleshooting Connection: If the connection fails, press the "SYNC" button on the console for 15 seconds to clear all previously connected controllers. Then, repeat steps 2 and 3.

The Bluetooth receiving distance is approximately 10 meters (33 feet) in an open environment. Performance may be affected by strong magnetic fields or complex power grids.

5. Operating Instructions

Once connected, the Wii Remote Controller can be used for various interactive games. The built-in MotionPlus and Motion Sensor provide enhanced control and immersion.

• MotionPlus: Provides more precise detection of rotation direction, angle, speed, and force during control.
• Motion Sensor: Detects changes in the controller's three-dimensional tilt using kinetic energy sensing.
• Vibration Feedback: The built-in motor provides haptic feedback for a more immersive gaming experience.
• Speaker: The integrated speaker provides in-game sound effects directly from the controller.
• Nunchuk Connection: Connect the Nunchuk to the expansion terminal at the bottom of the Wii Remote for additional control options (e.g., 3D joystick, Z and C buttons).

6. Maintenance and Care

• Do not expose the product to fire or extreme heat to avoid damage and environmental pollution.
• Avoid wiping with corrosive liquids or using hard objects that could scratch the surface of the casing.
• Do not place the product in environments that are excessively hot, cold, humid, dusty, or exposed to direct sunlight.
• To clean the surface, use a dry muslin cloth to wipe away dirt and dust. Do not use cleaning fluids or chemical solvents, as they may corrode the casing or damage internal components.
• If the product will not be used for an extended period, remove the batteries to prevent leakage and damage.

7. Troubleshooting

• Controller Not Connecting:
  1. Ensure fresh AA batteries are correctly installed.
  2. Re-attempt the syncing process (Section 4.2). If it fails, press the console's SYNC button for 15 seconds to clear previous connections, then try syncing again.
  3. Ensure the console is powered on and within the 10-meter Bluetooth range.
• D-Pad Input Issues: Some users have noted that the D-pad may require slightly more pressure than original controllers to register input. Press firmly.
• MotionPlus/Nunchuk Not Working: Ensure the Nunchuk is securely connected to the expansion terminal. If MotionPlus was expected but not received, verify the product variant purchased.
• Unauthorized Modifications: Do not attempt to disassemble or modify any part of this product yourself. Such actions can damage the product and will void your product warranty.

8. Specifications

9. User Tips

• Dolphin Emulator Compatibility: This controller has been reported to work well with Dolphin emulator for PC.
• D-Pad Sensitivity: If you experience unresponsive D-pad inputs, try applying slightly more pressure.
• MotionPlus Verification: If you specifically ordered a controller with MotionPlus, ensure it functions as expected upon receipt. Some users have reported receiving standard controllers instead.
• Battery Life: For optimal performance and to prevent potential damage, remove AA batteries if the controller will not be used for an extended period.

10. Warranty and Support

Unauthorized disassembly, modification, or repair of any part of this product will void the product warranty.

For support or inquiries, please contact:

APEX CE SPECIALISTS LIMITED
UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK,
NEW MALLOW ROAD, CORK, T23AT2P, IRELAND
Email: Info@apex-ce.com, euservice168@outlook.com

Manufacturer: Huizhou Ronghui Technology Co., Ltd.
Address: Liboshui First Industrial Zone, Shiwan Town, Boluo County, Huizhou City
Tel: 0752-6802133 Fax: 0752-6802036

A detailed user manual in PDF format is also available for download. Please refer to the seller's product page for the link or contact support.

If you wish to dispose of this product, please do so at a professional recycling station.