1. Product Overview
The MOES Tuya ZigBee Temperature and Humidity Sensor is a smart device designed to monitor indoor environmental conditions. It features a clear digital LCD display for real-time readings and integrates with the Tuya Smart APP for remote monitoring and smart automation. This sensor requires a Tuya ZigBee hub for full functionality and smart home integration.
2. Package Contents
- Temperature Humidity Sensor × 1
- Product Manual × 1
- Wall Sticker × 1
3. Specifications
| Feature | Detail |
|---|---|
| Product Name | ZigBee Temperature Humidity Sensor |
| Wireless Protocol | ZigBee 3.0 |
| Temperature Measurement Range | -10℃ ~ 50°C |
| Humidity Measurement Range | 0% - 99%RH |
| Working Voltage | DC2.4V-3V |
| Battery Specification | CR2032 button cell |
| Product Size (Round) | φ60 × 16.7mm |
| Product Size (Square) | 16.7 × 60 × 60mm |
| Screen Size (Round) | φ46.5mm |
| Screen Size (Square) | 46.5 × 46.5mm |
| Product Net Weight (Round) | 42g |
| Product Net Weight (Square) | 49.5g |
| Certification | CE |
| Smart Home Platform | Tuya |
4. Setup
4.1 Battery Installation
- Locate the battery compartment cover on the back of the sensor.
- Gently twist or slide the cover to open it.
- Insert one CR2032 button cell battery, ensuring the correct polarity (+/-).
- Close the battery compartment cover securely.
4.2 Pairing with Tuya ZigBee Hub
Important: A Tuya ZigBee gateway (hub) is required for this sensor to function and connect to the Tuya Smart APP. The sensor cannot connect directly to Wi-Fi.
- Ensure your Tuya ZigBee hub is powered on and connected to your home network.
- Open the Tuya Smart or Smart Life APP on your smartphone.
- Navigate to the hub's interface in the APP and select "Add sub-device" or a similar option.
- Follow the on-screen instructions in the APP to put the sensor into pairing mode (this usually involves pressing and holding a button on the sensor for a few seconds until an indicator light flashes).
- Once the sensor is detected and added, you can rename it and assign it to a room.
4.3 Placement
The sensor offers flexible placement options:
- Table Lying Mode: Place the sensor flat on any surface.
- Table Standing Mode: Position the sensor upright on a table or shelf.
- Wall-mounting Mode: Use the provided wall sticker to attach the sensor to a clean, dry wall surface.
5. Operating Instructions
5.1 Reading the LCD Display
The digital LCD display shows real-time temperature and humidity readings. It also indicates the battery level with an icon.
- Temperature: Displayed in Celsius (℃) or Fahrenheit (℉).
- Humidity: Displayed as a percentage (RH).
- Battery Icon: Indicates the current battery charge level.
5.2 APP Remote Control
Once paired with the Tuya ZigBee hub, you can monitor the temperature and humidity remotely via the Tuya Smart or Smart Life APP from anywhere.
5.3 Temperature Unit Conversion
You can switch the temperature unit between Celsius (℃) and Fahrenheit (℉) directly within the Tuya Smart or Smart Life APP for your convenience.
5.4 Data Log Review
The APP provides a data graph for humidity and temperature, allowing you to review historical data by day, month, and year. This helps in understanding environmental trends in your home.
5.5 Smart Linkage Function
Leverage the smart automation features in the Tuya Smart APP to create linkages with other smart devices. For example:
- If the temperature drops below a set point (e.g., 21.3℃), automatically turn on a smart electric heater.
- If the humidity falls below a certain percentage (e.g., 68%), automatically activate a smart humidifier.
- The APP also features an intelligent guardian mode with facial expressions to indicate indoor comfort levels.
Video: Demonstration of setting up smart scene linkage in the Tuya Smart APP to control an AC unit based on temperature.
6. Maintenance and Care
- Battery Replacement: When the battery icon on the LCD or in the APP indicates low power, replace the CR2032 button cell battery following the installation steps in Section 4.1.
- Cleaning: Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or sprays.
- Environmental Conditions: Avoid placing the sensor in direct sunlight, near heat sources, or in areas with extreme humidity or temperature fluctuations to ensure accurate readings and prolong device life.
7. Troubleshooting
- Device is dead/doesn't turn on: Check if the CR2032 battery is inserted correctly with the right polarity. Replace the battery if it's depleted.
- Sensor not connecting to the Tuya ZigBee hub:
- Ensure the ZigBee hub is powered on and connected to your network.
- Make sure the sensor is within the effective range of the ZigBee hub.
- Try re-pairing the sensor with the hub by following the steps in Section 4.2.
- Inaccurate temperature/humidity readings:
- Relocate the sensor away from direct sunlight, heating/cooling vents, or areas with drafts.
- Ensure the sensor is not placed in an enclosed space that might trap heat or moisture.
- Comfort indicator not on sensor display: The comfort indicator (facial expression) is displayed within the Tuya Smart APP, not directly on the sensor's LCD screen.
- Cannot view data history: Ensure the sensor is continuously connected to the Tuya ZigBee hub and the APP. Data history (day, month, year) is available in the APP's interface for the sensor.
8. User Tips
- For optimal performance, ensure your ZigBee hub has a strong signal in the area where the sensor is placed.
- Regularly check the battery level in the Tuya Smart APP to avoid unexpected disconnections.
- Experiment with smart automation rules to create a comfortable and energy-efficient environment tailored to your preferences.
- Utilize the data log feature in the app to identify patterns in your home's temperature and humidity, which can help in optimizing heating, cooling, and humidification.
9. Warranty and Support
This product includes a full 2-year manufacturer warranty and a 60-day refund guarantee from the date of purchase. For any issues or support, please contact your retailer or MOES customer service with your purchase details.
10. Recycling Information
This product is subject to the provisions of European Directive 2012/19/EU concerning waste electrical and electronic equipment (WEEE). Do not dispose of this product as unsorted municipal waste. Please return it to the point of sale or to a designated municipal collection point for recycling. This helps protect the environment and human health.
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.