1. Introduction
Thank you for choosing the Aroeve Air Purifier Fan. This device is designed to improve your indoor air quality by effectively removing airborne particles, odors, and allergens. Featuring an advanced 5-layer filtration system with an H13 True HEPA filter, it captures 99.97% of particles as small as 0.3 microns, including dust, pollen, pet dander, hair, lint, smoke, and fumes. The integrated antibacterial protection further ensures a healthier environment by eliminating harmful bacteria.
2. Safety Instructions
- Read all instructions before using the appliance.
- Always place the air purifier on a firm, level surface.
- Keep the appliance away from heat sources, direct sunlight, and moisture.
- Do not block air inlets or outlets.
- Unplug the air purifier before cleaning or performing any maintenance.
- Do not operate the appliance with a damaged cord or plug.
- This appliance is for household use only.
3. Package Contents
Please check the package for the following items:
- Aroeve Air Purifier Fan Unit (MK11W or JH11WH)
- H13 True HEPA Filter (pre-installed or separate)
- User Manual (this document)
4. Product Overview
The Aroeve Air Purifier Fan features a sleek design with an intuitive control panel and a powerful 5-layer filtration system.
4.1 Main Unit
The main unit houses the fan, motor, and control electronics. It includes an air inlet grille, an air outlet, and a digital display with touch controls.
4.2 Control Panel
The top-mounted control panel allows you to manage all functions of the air purifier. It typically includes:
- Power Button: To turn the unit On/Off.
- Fan Speed Button: To adjust fan speed levels.
- Mode Button: To select different operating modes (e.g., Auto, Sleep).
- Timer Button: To set an operating duration.
- Light Button: To control display/indicator lights.
- Filter Reset Button: To reset the filter life indicator after replacement.
- Display: Shows current settings, air quality (PM2.5), temperature, and humidity.
4.3 Filtration System
The air purifier utilizes a comprehensive 5-layer filtration system to ensure thorough air purification:
- Washable Filter: Captures large particles like dust, hair, dander, lint, and fibers.
- Air Pretreatment System: Further prepares air for fine filtration.
- Impressive Filter Layer: Enhances particle capture.
- Activated Carbon Filter: Physically adsorbs smoke, odors, and fumes.
- Internal Disinfection: Provides strong antibacterial protection, directly reacting with bacteria to eliminate them.
The core of the system is the H13 True HEPA filter, which removes 99.97% of airborne particles 0.3 microns or larger.
5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | AROEVE |
| Model | MK11W / JH11WH Purifier |
| Style | Air Purifier |
| Filter Type | H13 True HEPA Filter |
| Power (W) | 60W |
| Voltage | 110 V |
| Air Volume | Above 400m³/h |
| Dimensions (Size) | 22 x 22 x 20 cm |
| Usage Condition | Household |
| Power Source | Electrical |
| Certification | ETL |
| Hign-concerned Chemical | None |
6. Setup
6.1 Unpacking
- Carefully remove the air purifier and all packaging materials from the box.
- Retain the packaging for future storage or transport.
6.2 Filter Installation
The H13 True HEPA filter may come pre-installed or require installation before first use. Follow these steps:
- Ensure the air purifier is unplugged from the power outlet.
- Locate the filter compartment cover, usually at the bottom or back of the unit.
- Open or remove the cover according to the markings on the unit.
- If the filter is wrapped in plastic, remove all plastic packaging from the filter.
- Insert the H13 True HEPA filter into the compartment, ensuring it is seated correctly.
- Close or reattach the filter compartment cover securely.
6.3 Placement
For optimal performance, place the air purifier in a location with good air circulation, away from walls or furniture that might obstruct airflow. Ensure there is at least 6 inches (15 cm) of space around all sides of the unit.
6.4 Power Connection
Plug the power cord into a standard 110V AC electrical outlet.
7. Operating Instructions
7.1 Power On/Off
Press the Power Button on the control panel to turn the air purifier on or off. The display will illuminate when the unit is on.
7.2 Fan Speed Adjustment
Press the Fan Speed Button repeatedly to cycle through different fan speed settings (e.g., Low, Medium, High, Turbo). The current fan speed will be indicated on the display.
7.3 Mode Selection
Press the Mode Button to switch between available operating modes:
- Auto Mode: The purifier automatically adjusts fan speed based on detected air quality.
- Sleep Mode: Operates at the lowest fan speed with reduced noise and dimmed display for undisturbed sleep.
7.4 Timer Function
Press the Timer Button to set the desired operating time (e.g., 2H, 4H, 8H). The unit will automatically turn off after the set time has elapsed.
7.5 Display and Light Control
Press the Light Button to adjust the brightness of the display or turn off the indicator lights for nighttime use.
7.6 Filter Reset Indicator
When the filter needs replacement, a filter indicator light will illuminate. After replacing the filter, press and hold the Filter Reset Button for a few seconds until the indicator light turns off.
8. Maintenance
Regular maintenance ensures the longevity and optimal performance of your air purifier.
8.1 Filter Replacement
The H13 True HEPA filter has a limited lifespan and needs to be replaced periodically (typically every 6-8 months, depending on usage and air quality). Refer to section 6.2 for filter installation steps. Always use genuine Aroeve replacement filters.
8.2 Cleaning the Washable Pre-filter
The washable pre-filter, part of the 5-layer system, can be cleaned to maintain efficiency:
- Unplug the air purifier.
- Remove the filter assembly as described in section 6.2.
- Carefully separate the washable pre-filter layer.
- Rinse the pre-filter under running water until clean.
- Allow the pre-filter to air dry completely before reassembling. Do not use a dryer or direct heat.
8.3 Exterior Cleaning
Wipe the exterior of the air purifier with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | No power; Power cord not plugged in; Filter not installed correctly | Check power connection; Ensure filter is properly seated and compartment cover is closed. |
| Poor air purification | Filter is dirty or expired; Air inlets/outlets blocked | Replace filter; Clean washable pre-filter; Ensure clear space around the unit. |
| Unusual noise | Filter not installed correctly; Foreign object inside; Unit on uneven surface | Reinstall filter; Check for obstructions (unplug first); Place on a stable, flat surface. |
| Filter indicator light remains on after replacement | Filter reset not performed | Press and hold the Filter Reset Button until the light turns off. |
10. User Tips
- For best results, operate the air purifier continuously, especially in rooms with high activity or pets.
- Keep doors and windows closed while the air purifier is operating to maximize its effectiveness.
- Place the unit in the room where you spend the most time, such as a bedroom or living room.
- Regularly check the washable pre-filter and clean it as needed to extend the life of the HEPA filter.
- Consider running the purifier on a higher fan speed for a short period to quickly clean the air, then switch to a lower, quieter setting for continuous operation.
11. Warranty and Support
Aroeve products are manufactured to high-quality standards. For any questions regarding your product, please contact Aroeve customer support. Please retain your proof of purchase for warranty claims.
